CHIEF FSB-4243 User manual

INSTALLATION INSTRUCTIONS
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX [phone]
8401 EAGLE CREEK PKWY, STE. 700
SAVAGE, MINNESOTA 55378 USA
8835-000005 RevB
2006 Chief Manufacturing
www.chiefmfg.com
11/06
FSB-4243
DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(1) Interface Bracket (8) .500 x .260 x .125 Nylon Spacers
(4) Mounting Buttons – Tapped (4) 10-24 x .500 Phillips Pan Head Screws
(4) M6 x 16mm Phillips Pan Head Screws (4) M4 x 6mm Phillips Pan Machine Screws
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
DISPLAYS ARE EXTREMELY FRAGILE.
NOTE: If installing screen on a Chief F-series swing arm mount, proceed to Step 2.
1. Chief Q2Button Installation (Used with M-series mounts):
Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with
chamfered hole of mounting button (larger surface) facing bracket (four places) (see Figure 2 & Figure3).
CAUTION!
Figure 1
Figure 2 Figure 3

2. Bracket Installation: Place nylon spacers over mounting holes of screen and attach brackets to back of display
using the nylon spacers along with the M6 screws (see Figure 4 & Figure 5). Do not over
tighten screws. Stack spacers if needed.
3. Follow the Chief mount instruction manual for screen installation.
Use these holes when attaching to F-series mounts
Figure 4 Figure 5
ATTACH TO DISPLAY
USING THESE HOLES