CHIEF PSB-2114 User manual

INSTALLATION INSTRUCTIONS
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX [phone]
8401 EAGLE CREEK PKWY, STE. 700
SAVAGE, MINNESOTA 55378 USA
8804-000213 RevC
2005 Chief Manufacturing
www.chiefmfg.com
12/05
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4
TIMES THE COMBINED WEIGHT OF ALL COMPONENTS
PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE
REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE
MOUNT IS 175 POUNDS
(
79.38 KG
)
.
PSB-2114
PLASMA DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(2) Plasma Static Mount Brackets (4) Mounting Buttons
(4) 10-24 Button Head Cap Screws (4) M6 X 25 mm Phillips Head Cap Screws
(4) .75 x .26 x .31 Nylon Spacers - White (4) 18mm x 8.3mm x 20mm Nylon Spacers - Black
(4) M6 x 45mm Phillips Head Cap Screws (1) 1/8” Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
PLASMA DISPLAYS ARE EXTREMELY FRAGILE.
1. Using a 10-24 Button head cap screw inserted from back side of bracket, secure mounting button,
with chamfered hole of mounting button (larger surface) facing bracket, to bracket (four places) (see
Figure 2 and Figure 3).
CAUTION!
Figure 1
WARNING!
Figure 2 Figure 3

2. Place .313” nylon spacers (white) over mounting holes on back of screen. Attach mounting brackets to
the display using the M6 x 25mm screws (see Figure 4 & Figure 5). If screen has a protrusion on back,
stack .313” (white) and 20mm (black) spacers and attach brackets using the longer M6 x 45mm screws.
3. With the aid of another person, lift the display up to the Chief Mount, aligning buttons of mounting
brackets with slots in the Chief Mount.
4. Lower safety latch on the Chief Mount to secure the display, making sure latch is completely engaged.
Figure 4 Figure 5
If screen has protrusion
on back, stack both white
and black spacers and attach
bracket using the longer screws