CHIEF PSB-2048 User manual

8804-000264 REV B 12/19/05
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: [phone], Email: [email protected]
INSTALLATION INSTRUCTIONS
PSB-2048
LCD DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(1) LCD Interface Bracket (4) Mounting Buttons-Tapped 10-24
(4) 10-24 x .5” Button Head Cap Screws (8) M6-1.0 x 25mm Phillips Head Cap Screws
(8) ½ x .316 x ½ Round Nylon Spacer (1) 1/8” Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
LCD DISPLAYS ARE EXTREMELY FRAGILE.
1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with
chamfered hole of mounting button (larger surface) facing bracket, to bracket (four places) (see Figure 2
& Figure 3).
2. Place Nylon spacers on mounting holes, aligning hole pattern on brackets with pattern on back of LCD
Display (see Figure 4 & Figure 5 for 32" displays) (see Figure 6 & Figure 7 for 37" displays).
CAUTION!
Figure 1
Figure 2
Figure 3
Figure 4
Attaching to 32" displays
Figure 5
Attaching to 32" displays

8804-000264 REV B 12/19/05
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: [phone], Email: [email protected]
3. Using M6 Phillips head screws, secure brackets to display. Do not over tighten screws.
4. With the aid of another person, lift LCD Display up to the Chief Mount, aligning buttons of mounting
brackets with slots in the Chief Mount.
5. Lower safety latch on the Chief Mount to secure LCD Display, making sure latch is completely engaged.
Figure 6
Attaching to 37" displays
Figure 7
Attaching to 37" displays