Chileaf BBQ100 User manual

Thank you for selecting CHILEAF! This wireless meat
thermometer will be your good assistant to perfectly grilled
food. The app-connected function allows you to monitor
the doneness of four cuts of meat and notifies you on
your smart phone once food has reached the perfect
temperature to serve.
Packaging Contents
Body *1
Temperature probe *4
Metal probe bracket *4
probe holder *2
+-
AAA battery *3
* Extra Probes can be ordered via CHILEAF o󰀩cial web
site, for more information, please visit: www.chileaf.com
Front
1
2
3
4
5
6
7
8
9
10
12
11
1. Cooking Mode; Cooking 2. Doneness Level
Status; Food Type
3. Probe Jack Indicator 4. Probe Insertion Indicator
5. Probe Jack 6. Low Battery Indication
7. Target Temperature 8. Bluetooth Icon
9. °C/°F: Temperature Units 10. Current Temperature
11. Timer 12. Touch Key
Back
13
14
15
16
17
13. Jack Cover 14. Stand
15. Concealed Hook
16. °C/°F Switch Button
17. Battery Jar
How to Use
Getting start
• Slide up to remove the stand, then unscrew the cover of
battery jar.
• Follow the (+/-) icon to put three AAA batteries into the jar.
• Replace the cover and stand.
Probe Connection
• Lift the jack cover
• Take probes out from the probe holder
• Insert probes into the jack socket
• To ensure accurate readings, place the probe as close
to the food center as possible. The lead is about 3.3 ft (1
meter) and made by heat-resistant material.
• However, it is noticed that leads and LCD screen CAN
NOT be heated by re.
Settings
CHILEAF provides three modes for your BBQ &cooking
• Food Profile: System has preset the required
temperature of several kinds of food and doneness in
accordance with USDA
• Target Temperature: You can set the target temperature
by yourself, once the temperature is reached, the alarm
will sound
• Timer: Once the preset time is reached, the alarm
will sound
Probes 1 to 4 need to be set separately when first use.
Tap -/ +to switch between probe 1,2,3 and 4.
Buttons & Application
To wake up CHILEAF, hold any button on it for 1s
Then press any button to light up screen.
[mode]
-
Tap “mode” to switch the mode selection: Meat (Food
Prole) --> Temper --> Timer
User Manual
BBQ Thermometer with BLE
Model: BBQ100
a. Meat Prole Mode
• Switch the mode into food prole, press and hold “mode”
for 2sec. until the word starts ashing.
• Then use “+” “-” to set type of food
Tap “mode” and use “+” “-” to choose the Doneness after
choosing the type, then tap “mode” again to conrm.
b. Temper Mode
• Use “mode” to switch mode into TEMPER, press & hold
“mode” for 2sec. to set target temperature and tap “mode”
again to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of temperature is 100°F to 464°F
C. Timer
• Switch mode into TIMER, press & hold “mode” for 2sec.
to set countdown time mm --> ss, then tap “mode” again
to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of minute is up to 99, and 59 to second
[+] [-]
• Use “+” “-” to decide which probe Will be showed
on screen
• Use “+” “-” after the mode starts flashing to change
the value
* All above are unavailable when the screen shows
“cook…”
[start/stop]
Tap to start/stop cooking
Tap to stop alert
Hold for 2 sec. to turn o󰀨 the unit (unavailable on cooking)

Thank you for selecting CHILEAF! This wireless meat
thermometer will be your good assistant to perfectly grilled
food. The app-connected function allows you to monitor
the doneness of four cuts of meat and notifies you on
your smart phone once food has reached the perfect
temperature to serve.
Packaging Contents
Body *1
Temperature probe *4
Metal probe bracket *4
probe holder *2
+-
AAA battery *3
* Extra Probes can be ordered via CHILEAF o󰀩cial web
site, for more information, please visit: www.chileaf.com
Front
1
2
3
4
5
6
7
8
9
10
12
11
1. Cooking Mode; Cooking 2. Doneness Level
Status; Food Type
3. Probe Jack Indicator 4. Probe Insertion Indicator
5. Probe Jack 6. Low Battery Indication
7. Target Temperature 8. Bluetooth Icon
9. °C/°F: Temperature Units 10. Current Temperature
11. Timer 12. Touch Key
Back
13
14
15
16
17
13. Jack Cover 14. Stand
15. Concealed Hook
16. °C/°F Switch Button
17. Battery Jar
How to Use
Getting start
• Slide up to remove the stand, then unscrew the cover of
battery jar.
• Follow the (+/-) icon to put three AAA batteries into the jar.
• Replace the cover and stand.
Probe Connection
• Lift the jack cover
• Take probes out from the probe holder
• Insert probes into the jack socket
• To ensure accurate readings, place the probe as close
to the food center as possible. The lead is about 3.3 ft (1
meter) and made by heat-resistant material.
• However, it is noticed that leads and LCD screen CAN
NOT be heated by re.
Settings
CHILEAF provides three modes for your BBQ &cooking
• Food Profile: System has preset the required
temperature of several kinds of food and doneness in
accordance with USDA
• Target Temperature: You can set the target temperature
by yourself, once the temperature is reached, the alarm
will sound
• Timer: Once the preset time is reached, the alarm
will sound
Probes 1 to 4 need to be set separately when first use.
Tap -/ +to switch between probe 1,2,3 and 4.
Buttons & Application
To wake up CHILEAF, hold any button on it for 1s
Then press any button to light up screen.
[mode]
-
Tap “mode” to switch the mode selection: Meat (Food
Prole) --> Temper --> Timer
User Manual
BBQ Thermometer with BLE
Model: BBQ100
a. Meat Prole Mode
• Switch the mode into food prole, press and hold “mode”
for 2sec. until the word starts ashing.
• Then use “+” “-” to set type of food
Tap “mode” and use “+” “-” to choose the Doneness after
choosing the type, then tap “mode” again to conrm.
b. Temper Mode
• Use “mode” to switch mode into TEMPER, press & hold
“mode” for 2sec. to set target temperature and tap “mode”
again to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of temperature is 100°F to 464°F
C. Timer
• Switch mode into TIMER, press & hold “mode” for 2sec.
to set countdown time mm --> ss, then tap “mode” again
to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of minute is up to 99, and 59 to second
[+] [-]
• Use “+” “-” to decide which probe Will be showed
on screen
• Use “+” “-” after the mode starts flashing to change
the value
* All above are unavailable when the screen shows
“cook…”
[start/stop]
Tap to start/stop cooking
Tap to stop alert
Hold for 2 sec. to turn o󰀨 the unit (unavailable on cooking)

Thank you for selecting CHILEAF! This wireless meat
thermometer will be your good assistant to perfectly grilled
food. The app-connected function allows you to monitor
the doneness of four cuts of meat and notifies you on
your smart phone once food has reached the perfect
temperature to serve.
Packaging Contents
Body *1
Temperature probe *4
Metal probe bracket *4
probe holder *2
+-
AAA battery *3
* Extra Probes can be ordered via CHILEAF o󰀩cial web
site, for more information, please visit: www.chileaf.com
Front
1
2
3
4
5
6
7
8
9
10
12
11
1. Cooking Mode; Cooking 2. Doneness Level
Status; Food Type
3. Probe Jack Indicator 4. Probe Insertion Indicator
5. Probe Jack 6. Low Battery Indication
7. Target Temperature 8. Bluetooth Icon
9. °C/°F: Temperature Units 10. Current Temperature
11. Timer 12. Touch Key
Back
13
14
15
16
17
13. Jack Cover 14. Stand
15. Concealed Hook
16. °C/°F Switch Button
17. Battery Jar
How to Use
Getting start
• Slide up to remove the stand, then unscrew the cover of
battery jar.
• Follow the (+/-) icon to put three AAA batteries into the jar.
• Replace the cover and stand.
Probe Connection
• Lift the jack cover
• Take probes out from the probe holder
• Insert probes into the jack socket
• To ensure accurate readings, place the probe as close
to the food center as possible. The lead is about 3.3 ft (1
meter) and made by heat-resistant material.
• However, it is noticed that leads and LCD screen CAN
NOT be heated by re.
Settings
CHILEAF provides three modes for your BBQ &cooking
• Food Profile: System has preset the required
temperature of several kinds of food and doneness in
accordance with USDA
• Target Temperature: You can set the target temperature
by yourself, once the temperature is reached, the alarm
will sound
• Timer: Once the preset time is reached, the alarm
will sound
Probes 1 to 4 need to be set separately when first use.
Tap -/ +to switch between probe 1,2,3 and 4.
Buttons & Application
To wake up CHILEAF, hold any button on it for 1s
Then press any button to light up screen.
[mode]
-
Tap “mode” to switch the mode selection: Meat (Food
Prole) --> Temper --> Timer
User Manual
BBQ Thermometer with BLE
Model: BBQ100
a. Meat Prole Mode
• Switch the mode into food prole, press and hold “mode”
for 2sec. until the word starts ashing.
• Then use “+” “-” to set type of food
Tap “mode” and use “+” “-” to choose the Doneness after
choosing the type, then tap “mode” again to conrm.
b. Temper Mode
• Use “mode” to switch mode into TEMPER, press & hold
“mode” for 2sec. to set target temperature and tap “mode”
again to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of temperature is 100°F to 464°F
C. Timer
• Switch mode into TIMER, press & hold “mode” for 2sec.
to set countdown time mm --> ss, then tap “mode” again
to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of minute is up to 99, and 59 to second
[+] [-]
• Use “+” “-” to decide which probe Will be showed
on screen
• Use “+” “-” after the mode starts flashing to change
the value
* All above are unavailable when the screen shows
“cook…”
[start/stop]
Tap to start/stop cooking
Tap to stop alert
Hold for 2 sec. to turn o󰀨 the unit (unavailable on cooking)

Thank you for selecting CHILEAF! This wireless meat
thermometer will be your good assistant to perfectly grilled
food. The app-connected function allows you to monitor
the doneness of four cuts of meat and notifies you on
your smart phone once food has reached the perfect
temperature to serve.
Packaging Contents
Body *1
Temperature probe *4
Metal probe bracket *4
probe holder *2
+-
AAA battery *3
* Extra Probes can be ordered via CHILEAF o󰀩cial web
site, for more information, please visit: www.chileaf.com
Front
1
2
3
4
5
6
7
8
9
10
12
11
1. Cooking Mode; Cooking 2. Doneness Level
Status; Food Type
3. Probe Jack Indicator 4. Probe Insertion Indicator
5. Probe Jack 6. Low Battery Indication
7. Target Temperature 8. Bluetooth Icon
9. °C/°F: Temperature Units 10. Current Temperature
11. Timer 12. Touch Key
Back
13
14
15
16
17
13. Jack Cover 14. Stand
15. Concealed Hook
16. °C/°F Switch Button
17. Battery Jar
How to Use
Getting start
• Slide up to remove the stand, then unscrew the cover of
battery jar.
• Follow the (+/-) icon to put three AAA batteries into the jar.
• Replace the cover and stand.
Probe Connection
• Lift the jack cover
• Take probes out from the probe holder
• Insert probes into the jack socket
• To ensure accurate readings, place the probe as close
to the food center as possible. The lead is about 3.3 ft (1
meter) and made by heat-resistant material.
• However, it is noticed that leads and LCD screen CAN
NOT be heated by re.
Settings
CHILEAF provides three modes for your BBQ &cooking
• Food Profile: System has preset the required
temperature of several kinds of food and doneness in
accordance with USDA
• Target Temperature: You can set the target temperature
by yourself, once the temperature is reached, the alarm
will sound
• Timer: Once the preset time is reached, the alarm
will sound
Probes 1 to 4 need to be set separately when first use.
Tap -/ +to switch between probe 1,2,3 and 4.
Buttons & Application
To wake up CHILEAF, hold any button on it for 1s
Then press any button to light up screen.
[mode]
-
Tap “mode” to switch the mode selection: Meat (Food
Prole) --> Temper --> Timer
User Manual
BBQ Thermometer with BLE
Model: BBQ100
a. Meat Prole Mode
• Switch the mode into food prole, press and hold “mode”
for 2sec. until the word starts ashing.
• Then use “+” “-” to set type of food
Tap “mode” and use “+” “-” to choose the Doneness after
choosing the type, then tap “mode” again to conrm.
b. Temper Mode
• Use “mode” to switch mode into TEMPER, press & hold
“mode” for 2sec. to set target temperature and tap “mode”
again to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of temperature is 100°F to 464°F
C. Timer
• Switch mode into TIMER, press & hold “mode” for 2sec.
to set countdown time mm --> ss, then tap “mode” again
to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of minute is up to 99, and 59 to second
[+] [-]
• Use “+” “-” to decide which probe Will be showed
on screen
• Use “+” “-” after the mode starts flashing to change
the value
* All above are unavailable when the screen shows
“cook…”
[start/stop]
Tap to start/stop cooking
Tap to stop alert
Hold for 2 sec. to turn o󰀨 the unit (unavailable on cooking)

Thank you for selecting CHILEAF! This wireless meat
thermometer will be your good assistant to perfectly grilled
food. The app-connected function allows you to monitor
the doneness of four cuts of meat and notifies you on
your smart phone once food has reached the perfect
temperature to serve.
Packaging Contents
Body *1
Temperature probe *4
Metal probe bracket *4
probe holder *2
+-
AAA battery *3
* Extra Probes can be ordered via CHILEAF o󰀩cial web
site, for more information, please visit: www.chileaf.com
Front
1
2
3
4
5
6
7
8
9
10
12
11
1. Cooking Mode; Cooking 2. Doneness Level
Status; Food Type
3. Probe Jack Indicator 4. Probe Insertion Indicator
5. Probe Jack 6. Low Battery Indication
7. Target Temperature 8. Bluetooth Icon
9. °C/°F: Temperature Units 10. Current Temperature
11. Timer 12. Touch Key
Back
13
14
15
16
17
13. Jack Cover 14. Stand
15. Concealed Hook
16. °C/°F Switch Button
17. Battery Jar
How to Use
Getting start
• Slide up to remove the stand, then unscrew the cover of
battery jar.
• Follow the (+/-) icon to put three AAA batteries into the jar.
• Replace the cover and stand.
Probe Connection
• Lift the jack cover
• Take probes out from the probe holder
• Insert probes into the jack socket
• To ensure accurate readings, place the probe as close
to the food center as possible. The lead is about 3.3 ft (1
meter) and made by heat-resistant material.
• However, it is noticed that leads and LCD screen CAN
NOT be heated by re.
Settings
CHILEAF provides three modes for your BBQ &cooking
• Food Profile: System has preset the required
temperature of several kinds of food and doneness in
accordance with USDA
• Target Temperature: You can set the target temperature
by yourself, once the temperature is reached, the alarm
will sound
• Timer: Once the preset time is reached, the alarm
will sound
Probes 1 to 4 need to be set separately when first use.
Tap -/ +to switch between probe 1,2,3 and 4.
Buttons & Application
To wake up CHILEAF, hold any button on it for 1s
Then press any button to light up screen.
[mode]
-
Tap “mode” to switch the mode selection: Meat (Food
Prole) --> Temper --> Timer
User Manual
BBQ Thermometer with BLE
Model: BBQ100
a. Meat Prole Mode
• Switch the mode into food prole, press and hold “mode”
for 2sec. until the word starts ashing.
• Then use “+” “-” to set type of food
Tap “mode” and use “+” “-” to choose the Doneness after
choosing the type, then tap “mode” again to conrm.
b. Temper Mode
• Use “mode” to switch mode into TEMPER, press & hold
“mode” for 2sec. to set target temperature and tap “mode”
again to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of temperature is 100°F to 464°F
C. Timer
• Switch mode into TIMER, press & hold “mode” for 2sec.
to set countdown time mm --> ss, then tap “mode” again
to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of minute is up to 99, and 59 to second
[+] [-]
• Use “+” “-” to decide which probe Will be showed
on screen
• Use “+” “-” after the mode starts flashing to change
the value
* All above are unavailable when the screen shows
“cook…”
[start/stop]
Tap to start/stop cooking
Tap to stop alert
Hold for 2 sec. to turn o󰀨 the unit (unavailable on cooking)

Thank you for selecting CHILEAF! This wireless meat
thermometer will be your good assistant to perfectly grilled
food. The app-connected function allows you to monitor
the doneness of four cuts of meat and notifies you on
your smart phone once food has reached the perfect
temperature to serve.
Packaging Contents
Body *1
Temperature probe *4
Metal probe bracket *4
probe holder *2
+-
AAA battery *3
* Extra Probes can be ordered via CHILEAF o󰀩cial web
site, for more information, please visit: www.chileaf.com
Front
1
2
3
4
5
6
7
8
9
10
12
11
1. Cooking Mode; Cooking 2. Doneness Level
Status; Food Type
3. Probe Jack Indicator 4. Probe Insertion Indicator
5. Probe Jack 6. Low Battery Indication
7. Target Temperature 8. Bluetooth Icon
9. °C/°F: Temperature Units 10. Current Temperature
11. Timer 12. Touch Key
Back
13
14
15
16
17
13. Jack Cover 14. Stand
15. Concealed Hook
16. °C/°F Switch Button
17. Battery Jar
How to Use
Getting start
• Slide up to remove the stand, then unscrew the cover of
battery jar.
• Follow the (+/-) icon to put three AAA batteries into the jar.
• Replace the cover and stand.
Probe Connection
• Lift the jack cover
• Take probes out from the probe holder
• Insert probes into the jack socket
• To ensure accurate readings, place the probe as close
to the food center as possible. The lead is about 3.3 ft (1
meter) and made by heat-resistant material.
• However, it is noticed that leads and LCD screen CAN
NOT be heated by re.
Settings
CHILEAF provides three modes for your BBQ &cooking
• Food Profile: System has preset the required
temperature of several kinds of food and doneness in
accordance with USDA
• Target Temperature: You can set the target temperature
by yourself, once the temperature is reached, the alarm
will sound
• Timer: Once the preset time is reached, the alarm
will sound
Probes 1 to 4 need to be set separately when first use.
Tap -/ +to switch between probe 1,2,3 and 4.
Buttons & Application
To wake up CHILEAF, hold any button on it for 1s
Then press any button to light up screen.
[mode]
-
Tap “mode” to switch the mode selection: Meat (Food
Prole) --> Temper --> Timer
User Manual
BBQ Thermometer with BLE
Model: BBQ100
a. Meat Prole Mode
• Switch the mode into food prole, press and hold “mode”
for 2sec. until the word starts ashing.
• Then use “+” “-” to set type of food
Tap “mode” and use “+” “-” to choose the Doneness after
choosing the type, then tap “mode” again to conrm.
b. Temper Mode
• Use “mode” to switch mode into TEMPER, press & hold
“mode” for 2sec. to set target temperature and tap “mode”
again to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of temperature is 100°F to 464°F
C. Timer
• Switch mode into TIMER, press & hold “mode” for 2sec.
to set countdown time mm --> ss, then tap “mode” again
to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of minute is up to 99, and 59 to second
[+] [-]
• Use “+” “-” to decide which probe Will be showed
on screen
• Use “+” “-” after the mode starts flashing to change
the value
* All above are unavailable when the screen shows
“cook…”
[start/stop]
Tap to start/stop cooking
Tap to stop alert
Hold for 2 sec. to turn o󰀨 the unit (unavailable on cooking)

Thank you for selecting CHILEAF! This wireless meat
thermometer will be your good assistant to perfectly grilled
food. The app-connected function allows you to monitor
the doneness of four cuts of meat and notifies you on
your smart phone once food has reached the perfect
temperature to serve.
Packaging Contents
Body *1
Temperature probe *4
Metal probe bracket *4
probe holder *2
+-
AAA battery *3
* Extra Probes can be ordered via CHILEAF o󰀩cial web
site, for more information, please visit: www.chileaf.com
Front
1
2
3
4
5
6
7
8
9
10
12
11
1. Cooking Mode; Cooking 2. Doneness Level
Status; Food Type
3. Probe Jack Indicator 4. Probe Insertion Indicator
5. Probe Jack 6. Low Battery Indication
7. Target Temperature 8. Bluetooth Icon
9. °C/°F: Temperature Units 10. Current Temperature
11. Timer 12. Touch Key
Back
13
14
15
16
17
13. Jack Cover 14. Stand
15. Concealed Hook
16. °C/°F Switch Button
17. Battery Jar
How to Use
Getting start
• Slide up to remove the stand, then unscrew the cover of
battery jar.
• Follow the (+/-) icon to put three AAA batteries into the jar.
• Replace the cover and stand.
Probe Connection
• Lift the jack cover
• Take probes out from the probe holder
• Insert probes into the jack socket
• To ensure accurate readings, place the probe as close
to the food center as possible. The lead is about 3.3 ft (1
meter) and made by heat-resistant material.
• However, it is noticed that leads and LCD screen CAN
NOT be heated by re.
Settings
CHILEAF provides three modes for your BBQ &cooking
• Food Profile: System has preset the required
temperature of several kinds of food and doneness in
accordance with USDA
• Target Temperature: You can set the target temperature
by yourself, once the temperature is reached, the alarm
will sound
• Timer: Once the preset time is reached, the alarm
will sound
Probes 1 to 4 need to be set separately when first use.
Tap -/ +to switch between probe 1,2,3 and 4.
Buttons & Application
To wake up CHILEAF, hold any button on it for 1s
Then press any button to light up screen.
[mode]
-
Tap “mode” to switch the mode selection: Meat (Food
Prole) --> Temper --> Timer
User Manual
BBQ Thermometer with BLE
Model: BBQ100
a. Meat Prole Mode
• Switch the mode into food prole, press and hold “mode”
for 2sec. until the word starts ashing.
• Then use “+” “-” to set type of food
Tap “mode” and use “+” “-” to choose the Doneness after
choosing the type, then tap “mode” again to conrm.
b. Temper Mode
• Use “mode” to switch mode into TEMPER, press & hold
“mode” for 2sec. to set target temperature and tap “mode”
again to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of temperature is 100°F to 464°F
C. Timer
• Switch mode into TIMER, press & hold “mode” for 2sec.
to set countdown time mm --> ss, then tap “mode” again
to conrm
• Press& hold “mode” for 5sec. to restore setup defaults
• The range of minute is up to 99, and 59 to second
[+] [-]
• Use “+” “-” to decide which probe Will be showed
on screen
• Use “+” “-” after the mode starts flashing to change
the value
* All above are unavailable when the screen shows
“cook…”
[start/stop]
Tap to start/stop cooking
Tap to stop alert
Hold for 2 sec. to turn o󰀨 the unit (unavailable on cooking)

Chi-BBQ
All steps can be done on Chi-BBQ
Bluetooth Connection
• Download the Chi-BBQ App by scan the QR code
• Make sure the bluetooth of your smart phone has been
turned on
• Open the Chi-BBQ app, then click “searching devices”
• Connect the device named “BBQ 100”
• Choose one probe, then tap the icon of settings
• Click “start” when the settings are completed
• Waiting for the alarm
When reaches the target temperature or time out, beep
sound and screen ashing will be activated on CHILEAF,
as well as the sound & vibration on Chi-BBQ app.
Note
Doneness level follows the USDA Standards
Specication
UNIT
Item Description
Size LxWxH 4.57x3x0.96"
(116x78x24.5mm)
Weight(including battery) 159g
Temperature
measuring rang
14°F to 572°F
(-10~+300°C)
Temperature accuracy ±1.8°F(±1°C)
Measurement cycle 6s
Power 3xAAA 1.5 battery
Download the Chi-BBQ App in Apple store or Google
play store,also scan QR code to directly install APP.
To order an extra metal probe, please visit our website at
www.chileaf.com for more
2019 Chileaf. All rights reserved.
Heat resistance for
table stand Around 140 °F (60 °C)
RF range 330 feet (100m)
METAL PROBE
Item Description
Probe Length 5.7’’(145mm)
weight 20.8g
Cable length 3.3 feet (1m)
Temperature range 14°F to 572°F(-10~+300°C)
For more products information about CHILEAF, please
visit www.chileaf.com
For any enquiry, please contact our Customer Services At
[email protected].
FAQ
1. Android or IOS connection failed.
1) Check the bluetooth status. Hold “+” for 2sec. to
conrm the status when there is no bluetooth connection
within 3.3 ft (1 meter).
2). The thermometer only allows one device to connect
for once. If you want to connect with another phone,
please go to Chi-BBQ and click “unpair” to disconnect
from the current phone.
3) Some Andriod phones cannot connect the BBQ
successfully. Then you need to go to the setting
interface in the mobile phone, open the application
management, find CHI-BBQ, open the GPS function,
then connect the phone again.
2. Does CHILEAF thermometer have the low temperature
alarm?
No, only have the low temperate setting: 100°F/38°C
3. Does CHILEAF thermometer have the high temperature
alarm?
Yes, when the temperature is higher than 280 °C, the
product will continue to alarm, then the probe needs
to be taken away from the high temperature place,
and the device will release the over-temperature alarm
automatically.
4. Is it still working without app?
Yes, it can be used alone.
5. What is the power supply of this wireless thermometer?
As the power supply, three AAA batteries should
be installed in thermometer when first use. Your
thermometer will remind you via the low battery indicator
on its screen.
6. How to convert temperature units (°C/°F) and Celsius?
1) Lift the cover of battery slot, you can see a switch
button on the left side.
2) Connect the APP, and switch the temperate in the
APP settings.
7. Without inserting the probes, whether the thermometer
can still connect with the app?
Yes, but the mode settings are not available.
8. Is it waterproof?
Yes, it rated IPX3. The contact heads of probes can be
cleaned by water. If the body wet, dry with a soft cloth.
9. The BBQ has three modes for the user to select, meat
mode, temperature mode and time mode. The user can
select the mode within the product or select the mode
via the APP.
a. Product selection mode: Touch the “MODE” button
once and the display will show a mode.
1) Meat mode: Touch the “MODE” button for 2 seconds
to enter into the meat selection mode. Select the meat
by “+” or “-” button, touch the “MODE” button to conrm,
and enter the meat selection degree, using “+"Or "-"
button to select the maturity, touch "MODE" to conrm.
After setting, touch the “START/STOP” button to turn on
the timekeeping mode.
2) Temperature mode: Touch the “MODE” button for 2
seconds to enter into the temperature setting mode. Use
the “+” or “-” button to select the temperature range and
touch the “MODE” button to conrm. After setting, touch
the “START/STOP” button to turn on the timing. mode.
(temperature range 100°F/38°C~464°F/240°C)
3) Time mode: Touch the “MODE” button to enter into
the minute setting mode, select the minute range by
“+” or “-” button, touch the time to enter into the second
setting mode, and select the second range by “+” or “-”
button. After setting, touch the “START/STOP” button
to turn on the countdown mode. (countdown time range
99min 59sec)
10. APP setting mode
a. In the APP channel display interface, select any
channel to enter, click Edit to enter into the setting mode.
1) Prole mode: Select any meat in the Select meat type,
then select the cooking degree in the Select doneness
level. After selecting it, click “Save” to start.
2) Temperature mode, select the cooking temperature
under Set target cooking temperature, click “Save” to
start. (temperature range 100°F/38°C~464°F/240°C)
3) Timer mode: Select the countdown time under Set
countdown timer and click “Save” to start. (countdown
time range 99min 59sec)

Chi-BBQ
All steps can be done on Chi-BBQ
Bluetooth Connection
• Download the Chi-BBQ App by scan the QR code
• Make sure the bluetooth of your smart phone has been
turned on
• Open the Chi-BBQ app, then click “searching devices”
• Connect the device named “BBQ 100”
• Choose one probe, then tap the icon of settings
• Click “start” when the settings are completed
• Waiting for the alarm
When reaches the target temperature or time out, beep
sound and screen ashing will be activated on CHILEAF,
as well as the sound & vibration on Chi-BBQ app.
Note
Doneness level follows the USDA Standards
Specication
UNIT
Item Description
Size LxWxH 4.57x3x0.96"
(116x78x24.5mm)
Weight(including battery) 159g
Temperature
measuring rang
14°F to 572°F
(-10~+300°C)
Temperature accuracy ±1.8°F(±1°C)
Measurement cycle 6s
Power 3xAAA 1.5 battery
Download the Chi-BBQ App in Apple store or Google
play store,also scan QR code to directly install APP.
To order an extra metal probe, please visit our website at
www.chileaf.com for more
2019 Chileaf. All rights reserved.
Heat resistance for
table stand Around 140 °F (60 °C)
RF range 330 feet (100m)
METAL PROBE
Item Description
Probe Length 5.7’’(145mm)
weight 20.8g
Cable length 3.3 feet (1m)
Temperature range 14°F to 572°F(-10~+300°C)
For more products information about CHILEAF, please
visit www.chileaf.com
For any enquiry, please contact our Customer Services At
[email protected].
FAQ
1. Android or IOS connection failed.
1) Check the bluetooth status. Hold “+” for 2sec. to
conrm the status when there is no bluetooth connection
within 3.3 ft (1 meter).
2). The thermometer only allows one device to connect
for once. If you want to connect with another phone,
please go to Chi-BBQ and click “unpair” to disconnect
from the current phone.
3) Some Andriod phones cannot connect the BBQ
successfully. Then you need to go to the setting
interface in the mobile phone, open the application
management, find CHI-BBQ, open the GPS function,
then connect the phone again.
2. Does CHILEAF thermometer have the low temperature
alarm?
No, only have the low temperate setting: 100°F/38°C
3. Does CHILEAF thermometer have the high temperature
alarm?
Yes, when the temperature is higher than 280 °C, the
product will continue to alarm, then the probe needs
to be taken away from the high temperature place,
and the device will release the over-temperature alarm
automatically.
4. Is it still working without app?
Yes, it can be used alone.
5. What is the power supply of this wireless thermometer?
As the power supply, three AAA batteries should
be installed in thermometer when first use. Your
thermometer will remind you via the low battery indicator
on its screen.
6. How to convert temperature units (°C/°F) and Celsius?
1) Lift the cover of battery slot, you can see a switch
button on the left side.
2) Connect the APP, and switch the temperate in the
APP settings.
7. Without inserting the probes, whether the thermometer
can still connect with the app?
Yes, but the mode settings are not available.
8. Is it waterproof?
Yes, it rated IPX3. The contact heads of probes can be
cleaned by water. If the body wet, dry with a soft cloth.
9. The BBQ has three modes for the user to select, meat
mode, temperature mode and time mode. The user can
select the mode within the product or select the mode
via the APP.
a. Product selection mode: Touch the “MODE” button
once and the display will show a mode.
1) Meat mode: Touch the “MODE” button for 2 seconds
to enter into the meat selection mode. Select the meat
by “+” or “-” button, touch the “MODE” button to conrm,
and enter the meat selection degree, using “+"Or "-"
button to select the maturity, touch "MODE" to conrm.
After setting, touch the “START/STOP” button to turn on
the timekeeping mode.
2) Temperature mode: Touch the “MODE” button for 2
seconds to enter into the temperature setting mode. Use
the “+” or “-” button to select the temperature range and
touch the “MODE” button to conrm. After setting, touch
the “START/STOP” button to turn on the timing. mode.
(temperature range 100°F/38°C~464°F/240°C)
3) Time mode: Touch the “MODE” button to enter into
the minute setting mode, select the minute range by
“+” or “-” button, touch the time to enter into the second
setting mode, and select the second range by “+” or “-”
button. After setting, touch the “START/STOP” button
to turn on the countdown mode. (countdown time range
99min 59sec)
10. APP setting mode
a. In the APP channel display interface, select any
channel to enter, click Edit to enter into the setting mode.
1) Prole mode: Select any meat in the Select meat type,
then select the cooking degree in the Select doneness
level. After selecting it, click “Save” to start.
2) Temperature mode, select the cooking temperature
under Set target cooking temperature, click “Save” to
start. (temperature range 100°F/38°C~464°F/240°C)
3) Timer mode: Select the countdown time under Set
countdown timer and click “Save” to start. (countdown
time range 99min 59sec)

Chi-BBQ
All steps can be done on Chi-BBQ
Bluetooth Connection
• Download the Chi-BBQ App by scan the QR code
• Make sure the bluetooth of your smart phone has been
turned on
• Open the Chi-BBQ app, then click “searching devices”
• Connect the device named “BBQ 100”
• Choose one probe, then tap the icon of settings
• Click “start” when the settings are completed
• Waiting for the alarm
When reaches the target temperature or time out, beep
sound and screen ashing will be activated on CHILEAF,
as well as the sound & vibration on Chi-BBQ app.
Note
Doneness level follows the USDA Standards
Specication
UNIT
Item Description
Size LxWxH 4.57x3x0.96"
(116x78x24.5mm)
Weight(including battery) 159g
Temperature
measuring rang
14°F to 572°F
(-10~+300°C)
Temperature accuracy ±1.8°F(±1°C)
Measurement cycle 6s
Power 3xAAA 1.5 battery
Download the Chi-BBQ App in Apple store or Google
play store,also scan QR code to directly install APP.
To order an extra metal probe, please visit our website at
www.chileaf.com for more
2019 Chileaf. All rights reserved.
Heat resistance for
table stand Around 140 °F (60 °C)
RF range 330 feet (100m)
METAL PROBE
Item Description
Probe Length 5.7’’(145mm)
weight 20.8g
Cable length 3.3 feet (1m)
Temperature range 14°F to 572°F(-10~+300°C)
For more products information about CHILEAF, please
visit www.chileaf.com
For any enquiry, please contact our Customer Services At
[email protected].
FAQ
1. Android or IOS connection failed.
1) Check the bluetooth status. Hold “+” for 2sec. to
conrm the status when there is no bluetooth connection
within 3.3 ft (1 meter).
2). The thermometer only allows one device to connect
for once. If you want to connect with another phone,
please go to Chi-BBQ and click “unpair” to disconnect
from the current phone.
3) Some Andriod phones cannot connect the BBQ
successfully. Then you need to go to the setting
interface in the mobile phone, open the application
management, find CHI-BBQ, open the GPS function,
then connect the phone again.
2. Does CHILEAF thermometer have the low temperature
alarm?
No, only have the low temperate setting: 100°F/38°C
3. Does CHILEAF thermometer have the high temperature
alarm?
Yes, when the temperature is higher than 280 °C, the
product will continue to alarm, then the probe needs
to be taken away from the high temperature place,
and the device will release the over-temperature alarm
automatically.
4. Is it still working without app?
Yes, it can be used alone.
5. What is the power supply of this wireless thermometer?
As the power supply, three AAA batteries should
be installed in thermometer when first use. Your
thermometer will remind you via the low battery indicator
on its screen.
6. How to convert temperature units (°C/°F) and Celsius?
1) Lift the cover of battery slot, you can see a switch
button on the left side.
2) Connect the APP, and switch the temperate in the
APP settings.
7. Without inserting the probes, whether the thermometer
can still connect with the app?
Yes, but the mode settings are not available.
8. Is it waterproof?
Yes, it rated IPX3. The contact heads of probes can be
cleaned by water. If the body wet, dry with a soft cloth.
9. The BBQ has three modes for the user to select, meat
mode, temperature mode and time mode. The user can
select the mode within the product or select the mode
via the APP.
a. Product selection mode: Touch the “MODE” button
once and the display will show a mode.
1) Meat mode: Touch the “MODE” button for 2 seconds
to enter into the meat selection mode. Select the meat
by “+” or “-” button, touch the “MODE” button to conrm,
and enter the meat selection degree, using “+"Or "-"
button to select the maturity, touch "MODE" to conrm.
After setting, touch the “START/STOP” button to turn on
the timekeeping mode.
2) Temperature mode: Touch the “MODE” button for 2
seconds to enter into the temperature setting mode. Use
the “+” or “-” button to select the temperature range and
touch the “MODE” button to conrm. After setting, touch
the “START/STOP” button to turn on the timing. mode.
(temperature range 100°F/38°C~464°F/240°C)
3) Time mode: Touch the “MODE” button to enter into
the minute setting mode, select the minute range by
“+” or “-” button, touch the time to enter into the second
setting mode, and select the second range by “+” or “-”
button. After setting, touch the “START/STOP” button
to turn on the countdown mode. (countdown time range
99min 59sec)
10. APP setting mode
a. In the APP channel display interface, select any
channel to enter, click Edit to enter into the setting mode.
1) Prole mode: Select any meat in the Select meat type,
then select the cooking degree in the Select doneness
level. After selecting it, click “Save” to start.
2) Temperature mode, select the cooking temperature
under Set target cooking temperature, click “Save” to
start. (temperature range 100°F/38°C~464°F/240°C)
3) Timer mode: Select the countdown time under Set
countdown timer and click “Save” to start. (countdown
time range 99min 59sec)

Chi-BBQ
All steps can be done on Chi-BBQ
Bluetooth Connection
• Download the Chi-BBQ App by scan the QR code
• Make sure the bluetooth of your smart phone has been
turned on
• Open the Chi-BBQ app, then click “searching devices”
• Connect the device named “BBQ 100”
• Choose one probe, then tap the icon of settings
• Click “start” when the settings are completed
• Waiting for the alarm
When reaches the target temperature or time out, beep
sound and screen ashing will be activated on CHILEAF,
as well as the sound & vibration on Chi-BBQ app.
Note
Doneness level follows the USDA Standards
Specication
UNIT
Item Description
Size LxWxH 4.57x3x0.96"
(116x78x24.5mm)
Weight(including battery) 159g
Temperature
measuring rang
14°F to 572°F
(-10~+300°C)
Temperature accuracy ±1.8°F(±1°C)
Measurement cycle 6s
Power 3xAAA 1.5 battery
Download the Chi-BBQ App in Apple store or Google
play store,also scan QR code to directly install APP.
To order an extra metal probe, please visit our website at
www.chileaf.com for more
2019 Chileaf. All rights reserved.
Heat resistance for
table stand Around 140 °F (60 °C)
RF range 330 feet (100m)
METAL PROBE
Item Description
Probe Length 5.7’’(145mm)
weight 20.8g
Cable length 3.3 feet (1m)
Temperature range 14°F to 572°F(-10~+300°C)
For more products information about CHILEAF, please
visit www.chileaf.com
For any enquiry, please contact our Customer Services At
[email protected].
FAQ
1. Android or IOS connection failed.
1) Check the bluetooth status. Hold “+” for 2sec. to
conrm the status when there is no bluetooth connection
within 3.3 ft (1 meter).
2). The thermometer only allows one device to connect
for once. If you want to connect with another phone,
please go to Chi-BBQ and click “unpair” to disconnect
from the current phone.
3) Some Andriod phones cannot connect the BBQ
successfully. Then you need to go to the setting
interface in the mobile phone, open the application
management, find CHI-BBQ, open the GPS function,
then connect the phone again.
2. Does CHILEAF thermometer have the low temperature
alarm?
No, only have the low temperate setting: 100°F/38°C
3. Does CHILEAF thermometer have the high temperature
alarm?
Yes, when the temperature is higher than 280 °C, the
product will continue to alarm, then the probe needs
to be taken away from the high temperature place,
and the device will release the over-temperature alarm
automatically.
4. Is it still working without app?
Yes, it can be used alone.
5. What is the power supply of this wireless thermometer?
As the power supply, three AAA batteries should
be installed in thermometer when first use. Your
thermometer will remind you via the low battery indicator
on its screen.
6. How to convert temperature units (°C/°F) and Celsius?
1) Lift the cover of battery slot, you can see a switch
button on the left side.
2) Connect the APP, and switch the temperate in the
APP settings.
7. Without inserting the probes, whether the thermometer
can still connect with the app?
Yes, but the mode settings are not available.
8. Is it waterproof?
Yes, it rated IPX3. The contact heads of probes can be
cleaned by water. If the body wet, dry with a soft cloth.
9. The BBQ has three modes for the user to select, meat
mode, temperature mode and time mode. The user can
select the mode within the product or select the mode
via the APP.
a. Product selection mode: Touch the “MODE” button
once and the display will show a mode.
1) Meat mode: Touch the “MODE” button for 2 seconds
to enter into the meat selection mode. Select the meat
by “+” or “-” button, touch the “MODE” button to conrm,
and enter the meat selection degree, using “+"Or "-"
button to select the maturity, touch "MODE" to conrm.
After setting, touch the “START/STOP” button to turn on
the timekeeping mode.
2) Temperature mode: Touch the “MODE” button for 2
seconds to enter into the temperature setting mode. Use
the “+” or “-” button to select the temperature range and
touch the “MODE” button to conrm. After setting, touch
the “START/STOP” button to turn on the timing. mode.
(temperature range 100°F/38°C~464°F/240°C)
3) Time mode: Touch the “MODE” button to enter into
the minute setting mode, select the minute range by
“+” or “-” button, touch the time to enter into the second
setting mode, and select the second range by “+” or “-”
button. After setting, touch the “START/STOP” button
to turn on the countdown mode. (countdown time range
99min 59sec)
10. APP setting mode
a. In the APP channel display interface, select any
channel to enter, click Edit to enter into the setting mode.
1) Prole mode: Select any meat in the Select meat type,
then select the cooking degree in the Select doneness
level. After selecting it, click “Save” to start.
2) Temperature mode, select the cooking temperature
under Set target cooking temperature, click “Save” to
start. (temperature range 100°F/38°C~464°F/240°C)
3) Timer mode: Select the countdown time under Set
countdown timer and click “Save” to start. (countdown
time range 99min 59sec)

Chi-BBQ
All steps can be done on Chi-BBQ
Bluetooth Connection
• Download the Chi-BBQ App by scan the QR code
• Make sure the bluetooth of your smart phone has been
turned on
• Open the Chi-BBQ app, then click “searching devices”
• Connect the device named “BBQ 100”
• Choose one probe, then tap the icon of settings
• Click “start” when the settings are completed
• Waiting for the alarm
When reaches the target temperature or time out, beep
sound and screen ashing will be activated on CHILEAF,
as well as the sound & vibration on Chi-BBQ app.
Note
Doneness level follows the USDA Standards
Specication
UNIT
Item Description
Size LxWxH 4.57x3x0.96"
(116x78x24.5mm)
Weight(including battery) 159g
Temperature
measuring rang
14°F to 572°F
(-10~+300°C)
Temperature accuracy ±1.8°F(±1°C)
Measurement cycle 6s
Power 3xAAA 1.5 battery
Download the Chi-BBQ App in Apple store or Google
play store,also scan QR code to directly install APP.
To order an extra metal probe, please visit our website at
www.chileaf.com for more
2019 Chileaf. All rights reserved.
Heat resistance for
table stand Around 140 °F (60 °C)
RF range 330 feet (100m)
METAL PROBE
Item Description
Probe Length 5.7’’(145mm)
weight 20.8g
Cable length 3.3 feet (1m)
Temperature range 14°F to 572°F(-10~+300°C)
For more products information about CHILEAF, please
visit www.chileaf.com
For any enquiry, please contact our Customer Services At
[email protected].
FAQ
1. Android or IOS connection failed.
1) Check the bluetooth status. Hold “+” for 2sec. to
conrm the status when there is no bluetooth connection
within 3.3 ft (1 meter).
2). The thermometer only allows one device to connect
for once. If you want to connect with another phone,
please go to Chi-BBQ and click “unpair” to disconnect
from the current phone.
3) Some Andriod phones cannot connect the BBQ
successfully. Then you need to go to the setting
interface in the mobile phone, open the application
management, find CHI-BBQ, open the GPS function,
then connect the phone again.
2. Does CHILEAF thermometer have the low temperature
alarm?
No, only have the low temperate setting: 100°F/38°C
3. Does CHILEAF thermometer have the high temperature
alarm?
Yes, when the temperature is higher than 280 °C, the
product will continue to alarm, then the probe needs
to be taken away from the high temperature place,
and the device will release the over-temperature alarm
automatically.
4. Is it still working without app?
Yes, it can be used alone.
5. What is the power supply of this wireless thermometer?
As the power supply, three AAA batteries should
be installed in thermometer when first use. Your
thermometer will remind you via the low battery indicator
on its screen.
6. How to convert temperature units (°C/°F) and Celsius?
1) Lift the cover of battery slot, you can see a switch
button on the left side.
2) Connect the APP, and switch the temperate in the
APP settings.
7. Without inserting the probes, whether the thermometer
can still connect with the app?
Yes, but the mode settings are not available.
8. Is it waterproof?
Yes, it rated IPX3. The contact heads of probes can be
cleaned by water. If the body wet, dry with a soft cloth.
9. The BBQ has three modes for the user to select, meat
mode, temperature mode and time mode. The user can
select the mode within the product or select the mode
via the APP.
a. Product selection mode: Touch the “MODE” button
once and the display will show a mode.
1) Meat mode: Touch the “MODE” button for 2 seconds
to enter into the meat selection mode. Select the meat
by “+” or “-” button, touch the “MODE” button to conrm,
and enter the meat selection degree, using “+"Or "-"
button to select the maturity, touch "MODE" to conrm.
After setting, touch the “START/STOP” button to turn on
the timekeeping mode.
2) Temperature mode: Touch the “MODE” button for 2
seconds to enter into the temperature setting mode. Use
the “+” or “-” button to select the temperature range and
touch the “MODE” button to conrm. After setting, touch
the “START/STOP” button to turn on the timing. mode.
(temperature range 100°F/38°C~464°F/240°C)
3) Time mode: Touch the “MODE” button to enter into
the minute setting mode, select the minute range by
“+” or “-” button, touch the time to enter into the second
setting mode, and select the second range by “+” or “-”
button. After setting, touch the “START/STOP” button
to turn on the countdown mode. (countdown time range
99min 59sec)
10. APP setting mode
a. In the APP channel display interface, select any
channel to enter, click Edit to enter into the setting mode.
1) Prole mode: Select any meat in the Select meat type,
then select the cooking degree in the Select doneness
level. After selecting it, click “Save” to start.
2) Temperature mode, select the cooking temperature
under Set target cooking temperature, click “Save” to
start. (temperature range 100°F/38°C~464°F/240°C)
3) Timer mode: Select the countdown time under Set
countdown timer and click “Save” to start. (countdown
time range 99min 59sec)

Chi-BBQ
All steps can be done on Chi-BBQ
Bluetooth Connection
• Download the Chi-BBQ App by scan the QR code
• Make sure the bluetooth of your smart phone has been
turned on
• Open the Chi-BBQ app, then click “searching devices”
• Connect the device named “BBQ 100”
• Choose one probe, then tap the icon of settings
• Click “start” when the settings are completed
• Waiting for the alarm
When reaches the target temperature or time out, beep
sound and screen ashing will be activated on CHILEAF,
as well as the sound & vibration on Chi-BBQ app.
Note
Doneness level follows the USDA Standards
Specication
UNIT
Item Description
Size LxWxH 4.57x3x0.96"
(116x78x24.5mm)
Weight(including battery) 159g
Temperature
measuring rang
14°F to 572°F
(-10~+300°C)
Temperature accuracy ±1.8°F(±1°C)
Measurement cycle 6s
Power 3xAAA 1.5 battery
Download the Chi-BBQ App in Apple store or Google
play store,also scan QR code to directly install APP.
To order an extra metal probe, please visit our website at
www.chileaf.com for more
2019 Chileaf. All rights reserved.
Heat resistance for
table stand Around 140 °F (60 °C)
RF range 330 feet (100m)
METAL PROBE
Item Description
Probe Length 5.7’’(145mm)
weight 20.8g
Cable length 3.3 feet (1m)
Temperature range 14°F to 572°F(-10~+300°C)
For more products information about CHILEAF, please
visit www.chileaf.com
For any enquiry, please contact our Customer Services At
[email protected].
FAQ
1. Android or IOS connection failed.
1) Check the bluetooth status. Hold “+” for 2sec. to
conrm the status when there is no bluetooth connection
within 3.3 ft (1 meter).
2). The thermometer only allows one device to connect
for once. If you want to connect with another phone,
please go to Chi-BBQ and click “unpair” to disconnect
from the current phone.
3) Some Andriod phones cannot connect the BBQ
successfully. Then you need to go to the setting
interface in the mobile phone, open the application
management, find CHI-BBQ, open the GPS function,
then connect the phone again.
2. Does CHILEAF thermometer have the low temperature
alarm?
No, only have the low temperate setting: 100°F/38°C
3. Does CHILEAF thermometer have the high temperature
alarm?
Yes, when the temperature is higher than 280 °C, the
product will continue to alarm, then the probe needs
to be taken away from the high temperature place,
and the device will release the over-temperature alarm
automatically.
4. Is it still working without app?
Yes, it can be used alone.
5. What is the power supply of this wireless thermometer?
As the power supply, three AAA batteries should
be installed in thermometer when first use. Your
thermometer will remind you via the low battery indicator
on its screen.
6. How to convert temperature units (°C/°F) and Celsius?
1) Lift the cover of battery slot, you can see a switch
button on the left side.
2) Connect the APP, and switch the temperate in the
APP settings.
7. Without inserting the probes, whether the thermometer
can still connect with the app?
Yes, but the mode settings are not available.
8. Is it waterproof?
Yes, it rated IPX3. The contact heads of probes can be
cleaned by water. If the body wet, dry with a soft cloth.
9. The BBQ has three modes for the user to select, meat
mode, temperature mode and time mode. The user can
select the mode within the product or select the mode
via the APP.
a. Product selection mode: Touch the “MODE” button
once and the display will show a mode.
1) Meat mode: Touch the “MODE” button for 2 seconds
to enter into the meat selection mode. Select the meat
by “+” or “-” button, touch the “MODE” button to conrm,
and enter the meat selection degree, using “+"Or "-"
button to select the maturity, touch "MODE" to conrm.
After setting, touch the “START/STOP” button to turn on
the timekeeping mode.
2) Temperature mode: Touch the “MODE” button for 2
seconds to enter into the temperature setting mode. Use
the “+” or “-” button to select the temperature range and
touch the “MODE” button to conrm. After setting, touch
the “START/STOP” button to turn on the timing. mode.
(temperature range 100°F/38°C~464°F/240°C)
3) Time mode: Touch the “MODE” button to enter into
the minute setting mode, select the minute range by
“+” or “-” button, touch the time to enter into the second
setting mode, and select the second range by “+” or “-”
button. After setting, touch the “START/STOP” button
to turn on the countdown mode. (countdown time range
99min 59sec)
10. APP setting mode
a. In the APP channel display interface, select any
channel to enter, click Edit to enter into the setting mode.
1) Prole mode: Select any meat in the Select meat type,
then select the cooking degree in the Select doneness
level. After selecting it, click “Save” to start.
2) Temperature mode, select the cooking temperature
under Set target cooking temperature, click “Save” to
start. (temperature range 100°F/38°C~464°F/240°C)
3) Timer mode: Select the countdown time under Set
countdown timer and click “Save” to start. (countdown
time range 99min 59sec)

Chi-BBQ
All steps can be done on Chi-BBQ
Bluetooth Connection
• Download the Chi-BBQ App by scan the QR code
• Make sure the bluetooth of your smart phone has been
turned on
• Open the Chi-BBQ app, then click “searching devices”
• Connect the device named “BBQ 100”
• Choose one probe, then tap the icon of settings
• Click “start” when the settings are completed
• Waiting for the alarm
When reaches the target temperature or time out, beep
sound and screen ashing will be activated on CHILEAF,
as well as the sound & vibration on Chi-BBQ app.
Note
Doneness level follows the USDA Standards
Specication
UNIT
Item Description
Size LxWxH 4.57x3x0.96"
(116x78x24.5mm)
Weight(including battery) 159g
Temperature
measuring rang
14°F to 572°F
(-10~+300°C)
Temperature accuracy ±1.8°F(±1°C)
Measurement cycle 6s
Power 3xAAA 1.5 battery
Download the Chi-BBQ App in Apple store or Google
play store,also scan QR code to directly install APP.
To order an extra metal probe, please visit our website at
www.chileaf.com for more
2019 Chileaf. All rights reserved.
Heat resistance for
table stand Around 140 °F (60 °C)
RF range 330 feet (100m)
METAL PROBE
Item Description
Probe Length 5.7’’(145mm)
weight 20.8g
Cable length 3.3 feet (1m)
Temperature range 14°F to 572°F(-10~+300°C)
For more products information about CHILEAF, please
visit www.chileaf.com
For any enquiry, please contact our Customer Services At
[email protected].
FAQ
1. Android or IOS connection failed.
1) Check the bluetooth status. Hold “+” for 2sec. to
conrm the status when there is no bluetooth connection
within 3.3 ft (1 meter).
2). The thermometer only allows one device to connect
for once. If you want to connect with another phone,
please go to Chi-BBQ and click “unpair” to disconnect
from the current phone.
3) Some Andriod phones cannot connect the BBQ
successfully. Then you need to go to the setting
interface in the mobile phone, open the application
management, find CHI-BBQ, open the GPS function,
then connect the phone again.
2. Does CHILEAF thermometer have the low temperature
alarm?
No, only have the low temperate setting: 100°F/38°C
3. Does CHILEAF thermometer have the high temperature
alarm?
Yes, when the temperature is higher than 280 °C, the
product will continue to alarm, then the probe needs
to be taken away from the high temperature place,
and the device will release the over-temperature alarm
automatically.
4. Is it still working without app?
Yes, it can be used alone.
5. What is the power supply of this wireless thermometer?
As the power supply, three AAA batteries should
be installed in thermometer when first use. Your
thermometer will remind you via the low battery indicator
on its screen.
6. How to convert temperature units (°C/°F) and Celsius?
1) Lift the cover of battery slot, you can see a switch
button on the left side.
2) Connect the APP, and switch the temperate in the
APP settings.
7. Without inserting the probes, whether the thermometer
can still connect with the app?
Yes, but the mode settings are not available.
8. Is it waterproof?
Yes, it rated IPX3. The contact heads of probes can be
cleaned by water. If the body wet, dry with a soft cloth.
9. The BBQ has three modes for the user to select, meat
mode, temperature mode and time mode. The user can
select the mode within the product or select the mode
via the APP.
a. Product selection mode: Touch the “MODE” button
once and the display will show a mode.
1) Meat mode: Touch the “MODE” button for 2 seconds
to enter into the meat selection mode. Select the meat
by “+” or “-” button, touch the “MODE” button to conrm,
and enter the meat selection degree, using “+"Or "-"
button to select the maturity, touch "MODE" to conrm.
After setting, touch the “START/STOP” button to turn on
the timekeeping mode.
2) Temperature mode: Touch the “MODE” button for 2
seconds to enter into the temperature setting mode. Use
the “+” or “-” button to select the temperature range and
touch the “MODE” button to conrm. After setting, touch
the “START/STOP” button to turn on the timing. mode.
(temperature range 100°F/38°C~464°F/240°C)
3) Time mode: Touch the “MODE” button to enter into
the minute setting mode, select the minute range by
“+” or “-” button, touch the time to enter into the second
setting mode, and select the second range by “+” or “-”
button. After setting, touch the “START/STOP” button
to turn on the countdown mode. (countdown time range
99min 59sec)
10. APP setting mode
a. In the APP channel display interface, select any
channel to enter, click Edit to enter into the setting mode.
1) Prole mode: Select any meat in the Select meat type,
then select the cooking degree in the Select doneness
level. After selecting it, click “Save” to start.
2) Temperature mode, select the cooking temperature
under Set target cooking temperature, click “Save” to
start. (temperature range 100°F/38°C~464°F/240°C)
3) Timer mode: Select the countdown time under Set
countdown timer and click “Save” to start. (countdown
time range 99min 59sec)