Chipolino YETI User manual

This high chair has been manufactured in accordance
with the requirements of Directive 2001/95/EC of the European Parliament and
of the Council and complies with European Standard EN 14988:2017+A1:2020
Children’s high chairs. Safety requirements and regulations of the national
legislation, as well as the Consumer Protection Law.
IMPORTANT! RE AD CAREFULLY AND KEEP THIS USER’S
MANUAL IN A SAFE PL ACE FOR FUTURE REFERENCE!
INSTRUCTION MANUAL
FOR HIGH CHAIR
„YETI”

1
ATTENTION! YOUR CHILD WILL BE MOST SECURE IF YOU FOLLOW
THE INSTRUCTIONS AND RECOMMENDATIONS GIVEN IN THIS USER’S MANUAL!
CAUTION! NEVER LEAVE YOUR CHILD UNATTENDED!
WARNING! THIS PRODUCT IS SUITABLE FOR CHILDREN, WHO CAN SIT ALONE UNAIDED,
AGED UP TO 3 YEARS AND WEIGHING NO MORE THAN 15 KG.
WARNING! ALWAYS USE THE SAFETY BELTS, WHEN THE CHILD IS IN THE CHAIR! ALWAYS
CHECK IF THEY ARE SECURELY FIXED TO THE HIGH CHAIR’S FRAME!
WARNING! DANGER OF FALLING: DO NOT LET THE CHILD CLIMB ON THE PRODUCT!
WARNING! DO NOT USE THE HIGH CHAIR BEFORE HAVING MADE SURE THAT ALL PARTS
ARE IN GOOD ORDER AND ARE SET IN THE CORRECT POSITION!
WARNING! KEEP THIS PRODUCT AWAY FROM FIRE! BE AWARE OF THE RISK OF OPEN FIRE
AND OTHER SOURCE OF STRONG HEAT IN THE NEAR VICINITY OF THE HIGH CHAIR!
WARNING! OBSERVE THE RISK OF THE PRODUCT TILTING IF THE CHILD REACHES AND
PUSHES WITH ITS FEET SOLD BASE SUCH AS A TABLE.
Assembly of the product to be done only by adult!
To avoid injuries, make sure that the child is at safe distance during folding and unfolding of the
chair!
This high chair is not suitable and must not be used by children, who cannot sit unaided!
This high chair must not be used for children weighing more than 15 kg!
The high chair has a single seat, intended for one child only.
Do not lift the chair by the food tray!
 Discontinueusingtheproductifyoundanymissingordamagedparts!
Do not let your child stand in the high chair!
Never lift, move, make any setting or repair to the chair, while there is a child in it!
Do not place the chair on elevated and/or uneven surfaces, while there is a child in it!
Do not place the chair near stairs, pools or other hazardous areas!
Use the high chair only by its purpose.
Always apply parking devices on wheels! USE THE WHEELS ONLY FOR MOVING THE CHAIR!
Do not use any spare parts or other components, which are not approved by the producer!
The producer does not take any responsibility for the safety of the child when you have not used the
proper and original spare parts, approved and provided by him!
 Donotapplyanychangesormodicationstothehighchair'sconstruction!Contactthedealeroran
authorized repair service for advice and/or repair instead!
Do not allow children younger than 3 years near the high chair during the assembly or disassembly,
in order to prevent the risk of injury or swallowing of small parts!
The packaging of the product must be kept out of the reach of children to avoid the risk of
strangulation!

2
MAIN FEATURES OF THE PRODUCT
MAIN PARTS DIAGRAM
High chair is suitable for one child, who can sit alone unaided
High chair is suitable for one child aged up to 3 years and weighing not more than 15 kg.
5-point safety belt
Adjustable leg rest – 2 positions
Adjustable backrest – 3 positions
Height adjustable seat – 7 positions
Tray can be adjusted in 3 positions forth and back
Double tray (Upper part of the tray is detachable)
Compact folding for storage
Fabric cover Upper part of leg, set
Backrest of seat Rear leg set
Safety belt Front leg, set
Upper tray Supports
Food tray Wheels
A
F
A F
B
G
B G
C
H
C H
D
I
D I
E
J
E J

3
1 – INSTALLATION OF UPPER PART OF LEGS
1 – Press the folding button and open the legs
1a–Insertfrontlegsintotheslotsofseatandmovetheseatupuntilitxes.
Note: After installation the folding button must be located outwards.
2. ASSEMBLY OF WHEELS AND SUPPORTS
2-1 – Insert and press both wheels into the slots at rear legs and both supports – into the slots at front
legs.Byxingyouwillhearaclick.
3. INSTALLATION OF FRONT AND REAR LEGS
Note: Before pressing the pins, insert both endings of upper part into the legs.
ATTENTION! Make sure that pins come out of the slots and both parts of legs are strongly and stable
xed!
4. INSTALLATION OF FABRIC COVER
4 – Thread the belts through the slots at fabric cover.
4a–Placethefabriccoverintotheseat/backrestasshowningure.
5. INSTALLING AND REMOVAL OF FOOD TRAY
Pull out the two levers under the tray. Insert the tray in the seat armrest and release the levers until it
isxed.
ATTENTION!Makesurethetrayisxedbytryingtopullitoutformtheseat.
To remove the food tray pull both levers outwards and take it out from the chair.
ASSEMBLY INSTRUCTIONS
ATTENTION!Followexactlytheinstructionsgivenandtheorderforassemblyandusage,describedin
textsandpictures.Youwillnotneedanytoolsfortheassembly.
ATTENTION! CHECK THE STABILITY OF FIXING AFTER EACH OPERATION!

4
1. BACKREST ADJUSTMENT (3 positions)
Pullthemechanismatthebackandmovetheseattodesiredposition.Releasethemechanismtoxthe
backrest.Whenthepositionisxedyouwillhearaclick.
ATTENTION! Do not change the backrest recline angle while there is a child in high chair!
2. LEG REST ADJUSTMENT (2 positions)
Press simultaneously the buttons on both sides of leg rest to move the leg rest up or down to desired
position.Releasetoxtheposition.Whenthepositionisxedyouwillhearaclick.
3. SAFETY HARNESS SYSTEM
ATTENTION!
Safety harnesses must not be worn out or torn and buckles must be strong, without any damages
and provide secure connection!
Beltsshouldnotbetwisted,theymusttthebabywellandtheirlengthshouldnotbeadjustedwhile
they are fastened!
Donotplacethechildinhighchairifbeltsarenotxed!Theyareimportantforsafetyofchild!
Placethechildinthehighchairandfastenthebeltsintothecentralbuckleasshowningure.Setthe
plastic adjusters up/down to change the length of the belts.
4. ADJUSTMENT OF FOOD TRAY (3 positions)
4 – Pull the levers under the tray outwards.
4a – Move the tray forth/back until you reach the required position (1, 2 and 3) and release the levers.
Youmusthearaclicksoundbyxing.
4b – Place the upper tray onto the tray and press.
4c – If you are not going to use the tray, you can attach it on both hooks at rear legs.
5. HEIGHT ADJUSTMENT OF SEAT (7 positions)
Press simultaneously the two buttons on front tubes and move the seat up or down to desired position.
Releasethebuttonstoxtheseat.Whenthepositionisxedyouwillhearaclick.
ATTENTION! Do not change the seat height while there is a child in high chair!
6. PARKING DEVICE
Activated parking device – press the lever down.
Free parking device (wheels move easily) – lift the lever up.
7. FOLDING OF HIGH CHAIR
Stand behind the chair. Press simultaneously folding buttons and at the same time lift up to fold the legs.
FUNCTIONS

5
Folding button
Rear legs
wheels
Lever
Lever
Shoulder belts
Waist belts
Crotch
Support Support
Press both pins
simultaneously
Front
leg
Front
leg
“click”
“click”
“click”
“click”
“click”
“click”
ASSEMBLING

6
FUNCTIONS
“click”
“click”
Pull
Central buckle
Adjusting
buckles
Button
Hook
Button

7
CARE AND MAINTENANCE
Clean the fabrics, plastic parts and metal parts with damp cotton cloth or sponge and mild soap.
Do not use abrasive, bleach or other aggressive detergents.
Always after cleaning leave the high chair fully dry and after that use it or store it. It may appear mold
to your high chair if you keep it moist.
Do not put any objects and things in high chair or on the top of it to avoid damages of the structure.
 Alwaysstoreyourhighchairindoors.Donotexposetodirectenvironmentinuence-sun,rain,
moisture and high temperature intervals.
Fabric composition:
Outer: 100% eco leather
Filling: 100% polyester
STHYE023ххxх
Folding button
Activated
Free
7
Parking device

1 Goliamokonarsko shosse, Plovdiv, BULGARIA
www.chipolino.com