Christie Cinelife+ cp4415-rgb User manual

User Guide

020-103073-03

CineLife+

CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-

RGB

NOTICES

All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.

GENERAL

Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this

document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary

depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on

information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied

warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection

with the performance or use of this material. Manufacturing facilities in Canada and China are ISO 9001 certified. Manufacturing facilities in Canada are also

ISO 14001 certified.

Warranty

Products are warranted under Christie’s standard limited warranty, the details of which are available at https://www.christiedigital.com/help-center/

warranties/ or by contacting your Christie dealer or Christie.

PREVENTATIVE MAINTENANCE

Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in

accordance with the maintenance schedule specified by Christie, will void the warranty. For preventative maintenance schedules, refer to

www.christiedigital.com.

REGULATORY

The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at the user’s own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment

CAN ICES-3 (A) / NMB-3 (A)

이 기기는 업무용(A급)으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며, 가정 외의 지역에서 사용하는 것을 목적으로 합니다.

ENVIRONMENTAL

The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical

and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according

to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the

environment we live in!

Content

Safety precautions.................................................8

General safety precautions............................................. 8

Laser safety precautions...............................................9

AC power precautions.................................................9

Light intensity hazard distance..........................................10

Product labels.....................................................12

General hazards................................................. 12

Mandatory action.................................................13

Electrical labels..................................................13

Additional hazard labels............................................ 14

Introduction..................................................... 15

Product documentation...............................................15

Related documentation.............................................16

Key features......................................................17

Contact your dealer.................................................17

Understanding the Christie touch panel interface and remote user interface..............17

Using the Remote UI................................................ 18

Technical support...................................................19

Operating the projector.............................................20

Projector power modes...............................................20

System operation for CP4440-RGB and CP4450-RGB projectors......................20

Turning the projector on or off.......................................... 21

Logging on to the projector............................................ 21

Logging out of the projector............................................21

Turning the touch panel on or off.........................................21

Turning the light source on or off.........................................22

Opening or closing the shutter.......................................... 22

Adding a network time protocol server..................................... 22

Deleting a network time protocol server.................................... 23

Changing the time zone.............................................. 23

Changing the time format............................................. 23

Automatically adjusting the time for Daylight Saving Time.........................24

CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB 3

020-103073-03 Rev. 1 (01-2021)

Changing the orientation of the projected image...............................24

Changing the projector host name........................................25

Changing the temperature display........................................25

Managing the light source...........................................26

Creating a new laser file for CP4415-RGB and CP4420-RGB........................ 26

Creating a new laser file for CP4440-RGB and CP4450-RGB........................ 27

Modifying an existing laser file.......................................... 29

Copying existing laser settings to a new file..................................29

Deleting a laser file................................................. 30

Calibrating LiteLOC™.................................................30

Managing user accounts............................................32

Default user access permissions......................................... 32

Adding a user account............................................... 32

Changing user account permissions.......................................32

Changing a user account password........................................33

Deleting a user account...............................................33

Network settings..................................................34

Connecting the projector to the theater network...............................34

Activating SNMP...................................................34

Downloading MIB information...........................................35

Setting up an integrated media block..................................36

Selecting IMB preferences.............................................36

Activating IMB marriage.............................................. 36

Managing content, playlists, and storage...............................37

Working with channels.............................................38

Adding a channel for HDMI input.........................................38

Adding a channel for IMB input..........................................39

Selecting the active channel............................................40

Editing an existing channel.............................................40

Copying existing channel settings to a new channel.............................41

Viewing the channel list...............................................41

Moving a channel up or down the channel list.................................41

Deleting a channel..................................................41

Content

CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB 4

020-103073-03 Rev. 1 (01-2021)

Managing color setting files.........................................42

Creating a MCGD file................................................ 42

Editing an existing MCGD file........................................... 42

Copying existing MCGD file settings to a new file...............................43

Deleting a MCGD file................................................ 43

Creating a TCGD file.................................................43

Editing an existing TCGD file............................................44

Copying existing TCGD file settings to a new file...............................44

Deleting a TCGD file.................................................44

Adjusting the image size and position................................. 45

Activating the Intelligent Lens System......................................45

Creating a new ILS file...............................................45

Automatically calibrating the ILS.........................................45

Editing ILS file settings...............................................46

Copying existing ILS file settings.........................................46

Deleting an ILS file................................................. 46

Resetting the lens..................................................46

Creating a source file................................................46

Editing source file settings.............................................47

Copying existing source file settings to a new source file..........................47

Deleting a source file................................................47

Creating a screen file................................................48

Editing screen file settings.............................................48

Copying existing screen file settings to a new screen............................ 49

Deleting a screen file................................................49

Activating a warp file................................................ 49

Adjusting the image............................................... 50

Correcting vignetting................................................ 50

Correcting keystone effect.............................................50

Adjusting the integrator rod and fold mirror..................................51

Adjusting boresight................................................. 54

Adjusting DMD convergence............................................57

Masking the screen edges.............................................59

Test patterns.....................................................61

Displaying a test pattern..............................................61

Turning off a test pattern..............................................61

Content

CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB 5

020-103073-03 Rev. 1 (01-2021)

Importing a test pattern..............................................62

Deleting a test pattern............................................... 62

Working with the scheduler......................................... 63

Scheduling automation...............................................63

Editing a scheduled event............................................. 63

Copying and pasting an existing scheduled event...............................64

Copying and pasting scheduled events for an entire day.......................... 64

Cutting and pasting a scheduled event..................................... 64

Deleting a scheduled event............................................ 65

Deleting scheduled events for an entire day..................................65

Changing the day of the week the scheduler starts..............................65

Turning the scheduler off..............................................65

Automation......................................................66

Available macro actions...............................................66

Fire alarm macro...................................................67

Christie ACT actions.................................................67

JNIOR actions.....................................................68

Dolby Cinema processor actions......................................... 68

SKA-3D actions....................................................68

Creating a macro...................................................69

Running a macro...................................................69

Adding an action item to an existing macro.................................. 69

Adding a macro to an existing macro...................................... 70

Deleting a macro...................................................70

Adding an automation device to your auditorium...............................70

Modifying automation device settings......................................71

Removing an automation device from your auditorium........................... 71

Creating, editing, and deleting playlist triggers................................71

Creating a new global trigger...........................................72

Editing existing global trigger settings......................................72

Deleting a global trigger.............................................. 72

Importing a device library.............................................72

Viewing a device library...............................................72

Deleting a device library..............................................73

Backing up, restoring, and upgrading files..............................74

Creating a new backup file.............................................74

Content

CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB 6

020-103073-03 Rev. 1 (01-2021)

Exporting a backup file...............................................74

Importing a backup file...............................................74

Sorting backup files by name and date created................................75

Deleting a backup file................................................75

Restoring settings from a backup file...................................... 75

Restoring factory default settings.........................................75

Upgrading the projector software.........................................75

Accessing projector diagnostics..................................... 77

Retrieving and downloading system logs....................................77

Running the projector interrogator........................................77

Viewing laser diagnostic information.......................................77

Downloading a certificate..............................................78

Regulatory...................................................... 79

Safety......................................................... 79

Electro-magnetic compatibility.......................................... 79

Emissions..................................................... 79

Immunity..................................................... 79

Environmental.................................................... 80

Content

CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB 7

020-103073-03 Rev. 1 (01-2021)

Safety precautions

Learn about the safety precautions related to the Christie CineLife+ projector. This projector is

intended for use in a cinema environment.

General safety precautions

Read all safety and warning guidelines before installing or operating the projector.

Warning! If not avoided, the following could result in death or serious injury.

• TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be

tripped over, or damaged by persons walking on or objects rolling over the cables.

• This product must be installed within a restricted access location not accessible by the general

public.

• Only personnel who are trained on the precautions for the restricted access location can be

granted entry to the area.

• Install the product so users and the audience cannot enter the restricted area at eye level.

• ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.

• High leakage current present when connected to IT power systems.

• FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts

specified by Christie.

• FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.

• A minimum of four people or appropriately rated lift equipment is required to safely lift, install,

or move the product.

• Lift equipment must be used to position the product.

• Do not install or operate the projector in any position that does not meet the stated product

specifications for alignment and orientation.

Caution! If not avoided, the following could result in minor or moderate injury.

• Only Christie qualified technicians are permitted to open product enclosures.

CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB 8

020-103073-03 Rev. 1 (01-2021)

Laser safety precautions

Read all safety and warning guidelines before operating the projector laser.

Warning! If not avoided, the following could result in death or serious injury.

• Do not operate the cinema projector without all of its covers in place.

• LASER RADIATION HAZARD! This projector has a built-in Class 4 laser module. Never attempt to

disassemble or modify the laser module.

• Do not look directly into the lens when the light source is on. The extremely high brightness can

cause permanent eye damage.

• Possible hazardous optical radiation emitted from this product. (Risk group 3)

AC power precautions

Read all safety and warning guidelines before connecting to AC power.

Warning! If not avoided, the following could result in death or serious injury.

• SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by

Christie.

• FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and

power plug meet the appropriate local rating standards.

• SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage

and current, as specified on the license label.

• SHOCK HAZARD! The optional UPS power cord must be inserted into an outlet with grounding.

• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,

removing components, or opening any enclosure.

• Install the product near an easily accessible AC receptacle.

Caution! If not avoided, the following could result in minor or moderate injury.

• FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.

• FIRE OR SHOCK HAZARD! Do not overload power outlets and extension cords.

• SHOCK HAZARD! Power supply uses double pole/neutral fusing.

Safety precautions

CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB 9

020-103073-03 Rev. 1 (01-2021)

Light intensity hazard distance

This projector has been classified as Risk Group 3 as per the IEC 62471-5:2015 standard due to

possible hazardous optical and thermal radiation being emitted.

Warning! If not avoided, the following could result in serious injury.

• PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be

permitted. Class 1 Laser Product - Risk Group 3 according to IEC 60825-1:2014 and IEC

62471-5:2015.

• PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam

within the hazard distance or install the product at the height that prevents exposure of

spectators' eyes within the hazard distance. The hazard zone must be no lower than 2.5 meters

(US installations) or 2.0 meters (global installations) above any surface upon which any persons

are permitted to stand and the horizontal clearance to the hazard zone must be a minimum 1.0

meters.

• EXTREME BRIGHTNESS! Do not place reflective objects in the product light path.

The following diagram and table show the zones for ocular and skin hazard distances:

• A—Hazard zone. The region of space where the projection light from the laser-illuminated

projector is above emission limits for Risk Group 2. The light intensity may cause eye damage

after a momentary or brief exposure (before a person can avert his or her eyes away from the

light source). The light may cause skin burns to occur.

• B—Hazard distance. Operators must control access to the beam within the hazard distance or

install the product preventing potential exposure of the spectators' eyes from being in the

hazard distance.

• C—No access zone. Horizontal clearance of the no access zone must be a minimum of 1.0

meters.

• D—Vertical distance to hazard zone. The hazard zone must be no lower than 2.5 meters (US

installations) or 2.0 meters (global installations) above any surface upon which any persons

are permitted to stand.

• E—Represents the top view of the projector.

Safety precautions

CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB 10

020-103073-03 Rev. 1 (01-2021)

• F—Represents the side view of the projector.

For US and international hazard distances based upon IEC 62471-5:2015, Photobiological safety of

lamps and lamp systems – Part 5: Image projectors.

Projection Lens

(Throw Ratio 4K)

Part Number Hazard Distance

(m)

CP4440-RGB and

CP4450-RGB

0.90:1 HB fixed lens 38-809071-XX 1.8

1.13-1.66:1 DLPCine HB zoom lens 108-342100-XX 2.9

1.31-1.85:1 DLPCine HB zoom lens 108-335102-XX 3.3

1.45-2.17:1 DLPCine HB zoom lens 108-336103-XX 3.9

1.63-2.71:1 DLPCine HB zoom lens 108-337104-XX 4.8

1.95-3.26:1 DLPCine HB zoom lens 108-338105-XX 5.8

2.71-3.89:1 DLPCine HB zoom lens 108-278101-XX 6.8

1.13-1.66:1 DLPCine UHC zoom lens 163-103105-XX 2.6

1.31-1.85:1 DLPCine UHC zoom lens 163-104106-XX 2.9

1.45-2.17:1 DLPCine UHC zoom lens 163-105107-XX 3.5

1.63-2.71:1 DLPCine UHC zoom lens 163-106108-XX 4.1

1.95-3.26:1 DLPCine UHC zoom lens 163-107109-XX 5.0

2.71-3.89:1 DLPCine UHC zoom lens 163-108100-XX 6.0

Projection Lens

(Throw Ratio 4K)

Part

Number

Hazard Distance (m)

CP4415-RGB CP4420-RGB

0.90:1 HB fixed lens 38-809071-XX 1.0 1.0

1.13-1.66:1 DLPCine HB zoom lens 108-342100-XX 1.4 1.8

1.31-1.85:1 DLPCine HB zoom lens 108-335102-XX 1.6 2.0

1.45-2.17:1 DLPCine HB zoom lens 108-336103-XX 1.9 2.4

1.63-2.71:1 DLPCine HB zoom lens 108-337104-XX 2.3 2.9

1.95-3.26:1 DLPCine HB zoom lens 108-338105-XX 2.8 3.5

2.71-3.89:1 DLPCine HB zoom lens 108-278101-XX 3.3 4.2

3.89-5.43:1 DLPCine HB zoom lens 108-279101-XX 4.6 5.9

4.98-7.69:1 DLPCine HB zoom lens 108-280101-XX 6.6 8.4

1.13-1.66:1 DLPCine UHC zoom lens 163-103105-XX 1.3 1.6

1.31-1.85:1 DLPCine UHC zoom lens 163-104106-XX 1.4 1.8

1.45-2.17:1 DLPCine UHC zoom lens 163-105107-XX 1.7 2.1

1.63-2.71:1 DLPCine UHC zoom lens 163-106108-XX 1.9 2.5

Safety precautions

CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB 11

020-103073-03 Rev. 1 (01-2021)

Projection Lens

(Throw Ratio 4K)

Part

Number

Hazard Distance (m)

CP4415-RGB CP4420-RGB

1.95-3.26:1 DLPCine UHC zoom lens 163-107109-XX 2.4 3.1

2.71-3.89:1 DLPCine UHC zoom lens 163-108100-XX 2.8 3.6

3.89-5.43:1 DLPCine UHC zoom lens 163-109101-XX 4.0 5.1

4.98-7.69:1 DLPCine UHC zoom lens 163-110103-XX 5.7 7.3

For Installations in the United States

The following must be in place for laser-illuminated projector installations in the United States:

• The projection room shall be clearly identified by the posting of laser warning and restricted

access signs, and by restricting entry through physical means. The projection room sign must

display the warning "No direct exposure to beam shall be permitted".

• The Christie Laser Projection System Installation Checklist must be fully completed after the

installation and sent to [email protected]. A copy can remain on-site. This

checklist can be found as a separate document in the accessory box with the manual.

• Certain US states have additional laser regulatory requirements. Contact

[email protected] for additional regulatory requirements.

Product labels

Learn about the labels that may be used on the product. Labels on your product may be yellow or

black and white.

General hazards

Hazard warnings also apply to accessories once they are installed in a Christie product that is

connected to power.

Fire and Shock Hazard

To prevent fire or shock hazards, do not expose this product to rain or moisture.

Do not alter the power plug, overload the power outlet, or use it with extension cords.

Do not remove the product enclosure.

Only Christie qualified technicians are authorized to service the product.

Electrical Hazard

Risk of electric shock.

Do not remove the product enclosure.

Only Christie qualified technicians are authorized to service the product.

Safety precautions

CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB 12

020-103073-03 Rev. 1 (01-2021)

Warning! If not avoided, the following could result in death or serious injury.

Electric shock hazard. To avoid personal injury, disconnect all power sources before

performing maintenance or service.

Electrocution hazard. To avoid personal injury, always disconnect all power sources

before performing maintenance or service procedures.

Laser hazard. To avoid personal injury, avoid eye or skin exposure to direct or

scattered radiations.

Caution! If not avoided, the following could result in minor or moderate injury.

Hot surface hazard. To avoid personal injury, allow the product to cool for the

recommended cool down time before touching or handling for maintenance or

service.

Moving fan blade. To avoid personal injury, keep hands clear and loose clothing tied

back. Always disconnect all power sources before performing maintenance or service

procedures.

Notice. If not avoided, the following could result in property damage.

Mandatory action

Consult the service manual.

Disconnect all power sources before performing maintenance or service procedures.

Electrical labels

Indicates the presence of a protective earth ground.

Indicates the presence of an earth ground.

Safety precautions

CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB 13

020-103073-03 Rev. 1 (01-2021)

Additional hazard labels

Indicates Class 4 laser radiation when open. Avoid eye

or skin exposure to direct or scattered radiation.

CLASS 1 LASER PRODUCT IEC 60825-1:2014

Wavelengths:

CP4440-RGB: 450nm - 661nm

CP4450-RGB: 450nm - 645nm

FDA laser variance (US projectors only). This product is

in conformity with performance standards for laser

products under 21 CFR 1040, except with respect to

those characteristics authorized by Variance Number

2019-V-3343 effective on August 16, 2019.

Indicates a light hazard. Do not look directly into the

lens. The extreme high brightness can cause permanent

eye damage. Class 1 Laser Product - Risk Group 3

according to IEC 60825-1:2014 and IEC 62471-5:2015.

Indicates high leakage current. Earth or ground

connection essential before connecting the power

supply.

Indicates a light hazard. Do not look directly into the

lens. The extreme high brightness can cause permanent

eye damage.

Indicates moving parts hazard for the motorized lens

mount. To avoid personal injury, keep hands clear and

clothing tied back.

Safety precautions

CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB 14

020-103073-03 Rev. 1 (01-2021)

Introduction

This manual is intended for operators of Christie CineLife+ projection systems.

For complete production documentation and technical support, go to www.christiedigital.com.

Product documentation

For installation, setup, and user information, see the product documentation available on the Christie

Digital Systems USA Inc. website. Read all instructions before using or servicing this product.

CP4415-RGB

1. Go to the Christie website:

•https://bit.ly/3iAQoZj or

https://www.christiedigital.com/products/cinema/projection/cp4415-rgb

• Scan the QR code using a QR code reader app on a smartphone or tablet.

2. Switch to the Downloads tab.

CP4420-RGB

1. Go to the Christie website:

•https://bit.ly/3iBrYPu or

https://www.christiedigital.com/products/cinema/projection/cp4420-rgb

• Scan the QR code using a QR code reader app on a smartphone or tablet.

2. Switch to the Downloads tab.

CP4440-RGB

1. Go to the Christie website:

CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB 15

020-103073-03 Rev. 1 (01-2021)

•http://bit.ly/2NwVsRy or

https://www.christiedigital.com/en-us/cinema/cinema-products/digital-cinema-projectors/

christie-cp4440-rgb

• Scan the QR code using a QR code reader app on a smartphone or tablet.

2. Switch to the Downloads tab.

CP4450-RGB

1. Go to the Christie website:

•http://bit.ly/2UYil0V or

https://www.christiedigital.com/en-us/cinema/cinema-products/digital-cinema-projectors/

christie-cp4450-rgb

• Scan the QR code using a QR code reader app on a smartphone or tablet.

2. Switch to the Downloads tab.

Popular Projector manuals by other brands

InFocus

InFocus IN126x user guide

BenQ

BenQ Commuter CP120 user manual

Proxima

Proxima Pro AV 9500 user guide

Projectiondesign

Projectiondesign Action one mk II supplementary guide

LG HF85JG owner's manual

ZEROSKY

ZEROSKY PJ-32C instruction manual

Dell

Dell 1210S - DLP Projector - 2500 ANSI Lumens Specifications

Epson

Epson EB-G6250WNL Specifications

Dukane

Dukane ImagePro 8942 Specifications

Sanyo

Sanyo PLC-XW10 Service manual

Panasonic

Panasonic PT-RZ670 series operating instructions

Sony

Sony VPL-FHZ55 Brochure & specs

Mitsubishi Electric

Mitsubishi Electric XD400U specification

ViewSonic

ViewSonic VS11580 Guía del usuario

Hitachi

Hitachi CP-S317W specification

3M X55 Operator's guide

LG DX535 Service manual

Mitsubishi

Mitsubishi EX200U user manual

Christie CineLife+ CP4415-RGB User manual

Popular Projector manuals by other brands