Christie TPC-60 User manual

INSTRUCTIONS:
Adjusting Brightness & Contrast of the TPC-60
Apr. 2006, Rev.1 1 of 3 Pages
Introduction
These instructions explain how to change the screen brightness and contrast of the
Touch Panel Controller TPC-60. These display settings are part of the Windows CE

operating system that runs this device.
NOTE
Access is password-protected.
For installer/service technician use only.
Instructions
1. Go to the About menu in Christie’s TPC application. Click on the “STOP” sign icon to
exit the TPC application and go to the Windows CE
 desktop.
2. At the desktop, click Start, then Settings,
then Control Panel.
3. Select the Display icon.

Adjusting Brightness & Contrast of the TPC-60
Apr. 2006, Rev.1 2 of 3 Pages
4. In the Display Properties dialogue box,
select Backlight tab.
5. Move the Display Properties dialogue box
to the left to access its far right side. Click
the Advanced button.
6. In the Advanced Backlight Options dialogue
box, adjust the LCD Brightness Control and
the LCD Contrast Control as desired.
7. Click OK until you return to the Windows desktop.

Adjusting Brightness & Contrast of the TPC-60
Apr. 2006, Rev.1 3 of 3 Pages
8. Double-click the TPC Configurator icon.
9. Open the Advantech TPC Configurator
dialogue box.
10. Move the tabs and click Misc. tab.
11. Click Save button to save your
brightness/contrast settings to the TPC
registry and implement them for use.
12. When the SUCCESS dialogue box appears,
click OK.
13. Reboot the TPC.