Chrysler Sebring Sedan User manual

4
SEBRING SEDAN
Information is current as of September 1, 2009
www.media.chrysler.com
Note: Information shown is based on data available at time of publication (September 1, 2009).
Specifications are valid for Europe and may vary in other international markets. Vehicle model availability
may change per individual markets.
Chrysler Sebring Sedan
SPECIFICATIONS
Dimensions are in millimeters (inches) unless otherwise noted.
GENERAL INFORMATION
Body Style
Four-door sedan
Assembly Plant
Sterling Heights Assembly, Mich.
Vehicle Class
D-Segment
ENGINE: 2.0-LITER TURBO DIESEL DOHC 16-VALVE
Availability
Available on all Sebring models
Type and Description
Four cylinders in-line, turbocharged, high-pressure, direct injection
Displacement
1968 cu. cm (120.1 cu. in.)
Bore x Stroke
81 x 95.5 mm (3.19 x 3.76)
Valve System
Belt-driven DOHC, 16-valve
Fuel Injection
Electronically controlled, high-pressure direct injection
Construction
Cast-iron block, cast aluminum cylinder head, cast aluminum ladder
frame, forged steel crankshaft
Compression Ratio
18.0:1
Power
103 kW (140 hp DIN) @ 4000 rpm (70.0 hp DIN/L)
Torque
310 N•m (229 lb.-ft.) @ 1750 – 2500 rpm
Max. Engine Speed
5000 rpm (electronically limited)
Fuel Requirement
49 cetane diesel, DIN EN590
Oil Capacity
4.2 L (4.4 qt.) with dry filter
Coolant Capacity
4.0 L (4.2 qt.)
Emission Controls
Oxy-catalyst with integrated Diesel-particulate Filter (DPF) and cooled
Exhaust-gas Recirculation (EGR)
Emission Class
Euro IV
Fuel Consumption
Urban Cycle
8.2 L/100 km (6-mtx); 8.7 L/100 km (DCT)
Ex-urban Cycle
5.1 L/100 km (6-mtx); 5.6 L/100 km (DCT)
Combined Cycle
6.2 L/100 km (6-mtx); 6.8 L/100 km (DCT)
CO2 Emissions
164 g/km (6-mtx); 178 g/km (DCT)

5
SEBRING SEDAN
Information is current as of September 1, 2009
www.media.chrysler.com
ENGINE: 2.4-LITER, GASOLINE, DOHC, 16-VALVE, VVT, SMPI I-4
Availability
Available on all Sebring models
Type and Description
Four-cylinders inline, tuned intake manifold with Electronic
Active Charge Motion Control valves, dual counter-rotating balance
shafts dual Variable-valve Timing (VVT)
Displacement
2360 cu. cm (144 cu. in.)
Bore x Stroke
3.46 x 3.82 (88 x 97)
Valve System
Chain-driven DOHC, 16 valves, electronically controlled dual
Variable-valve Timing (VVT), direct-acting shimless mechanical
bucket tappets
Fuel Injection
Sequential, multi-port, electronic, returnless
Construction
High-pressure die cast-aluminum block with dry iron liners,
cast-aluminum cylinder heads, cast-aluminum ladder frame,
forged steel crankshaft
Compression Ratio
10.5:1
Power
124 kW (170 hp DIN) @ 6000 rpm (70.8 hp DIN/L)
Torque
220 N•m (162 lb.-ft.) @ 4400 rpm
Max. Engine Speed
6500 rpm (electronically limited)
Fuel Requirement
91 RON unleaded petrol
Oil Capacity
4.7 L (5.0 qt.)
Coolant Capacity
6.8 L (7.2 qt.)
Emission Controls
Single catalytic converter, dual heated oxygen sensors and
engine features
Emission Class
Euro IV
Fuel Consumption
Urban Cycle
12.2 L/100 km
Ex-urban Cycle
6.8 L/100 km
Combined Cycle
8.8 L/100 km
CO2 Emissions
208 g/km (4-atx)
ENGINE: 2.7-LITER, GASOLINE, DOHC, 24-VALVE, SMPI V-6
Availability
Available on all Sebring Touring and Limited models
Type and Description
60-degree, liquid-cooled, dual-tuned intake manifold with electronically
controlled manifold tuning valve
Displacement
2736 cu. cm (167 cu. in.)
Bore x Stroke
86 x 78.5 (3.38 x 3.09)
Valve System
DOHC, 24 valves, hydraulic end-pivot roller followers
Fuel Injection
Sequential, multi-port, electronic
Construction
Semi-permanent mold aluminum block with cast-in iron liners,
cast-aluminum heads
Compression Ratio
9.9:1
Power
137 kW (186 hp DIN) @ 5500 rpm (68.8 hp DIN/L)
Torque
256 N•m (191 lb.-ft.) @ 4000 rpm
Max. Engine Speed
6464 rpm (electronically limited)
Fuel Requirement
91 RON unleaded petrol, or E85
Oil Capacity
5.7 L (6 qt.) with dry filter
Coolant Capacity
9.0 L (9.5 qt.)
Emission Controls
Dual close-coupled three-way catalytic converters, quad-heated oxygen
sensors and internal engine features

6
SEBRING SEDAN
Information is current as of September 1, 2009
www.media.chrysler.com
Emission Class
Euro IV
Fuel Consumption
Urban Cycle
14.6 L/100 km
Ex-urban Cycle
7.2 L/100 km
Combined Cycle
9.9 L/100 km
CO2 Emissions
236 g/km (6-atx)
TRANSAXLE: 40TES, AUTOMATIC FOUR-SPEED OVERDRIVE
Availability
Available with 2.4 L engine
Description
4-speed overdrive, adaptive electronic control, electronically modulated
converter clutch
Gear Ratios
1st
2.842
2nd
1.57
3rd
1
4th
0.69
Reverse
2.21
Final-drive Ratio
3.91
Overall Top-gear
2.7
TRANSAXLE: 62TE, AUTOMATIC SIX-SPEED OVERDRIVE
Availability
Available with 2.7 L engine
Description
Six-speed, adaptive electronic control or Auto Stick driver-interactive
manual control and electronically modulated torque converter clutch
Gear Ratios
1st
4.127
2nd
2.842
3rd
2.283
4th
Upshift—1.452, WOT kickdown—1.570
5th
1
6th
0.69
Reverse
3.214
Transfer Ratio
0.95
Final-drive Ratio
3.43
Overall Top-gear
2.24

7
SEBRING SEDAN
Information is current as of September 1, 2009
www.media.chrysler.com
TRANSAXLE: AISIN BG6 SIX-SPEED MANUAL
Availability
Available with 2.0 L turbo-diesel engine
Description
Six-speed, overdrive, synchronized in all forward ratios,
cable-operated, 3-plane shifter
Gear Ratios
1st
3.59
2nd
2.05
3rd
1.37
4th
0.97
5th
0.90
6th
0.79
Reverse
3.83
Final-drive Ratio
4.06
Overall Top-gear
2.73
TRANSAXLE: GETRAG MPS6 SIX-SPEED DUAL-CLUTCH AUTOMATIC
Availability
Available with 2.0 L turbo-diesel engine
Description
Six-speed, overdrive, automated dual-clutch system with lay-shift
style gearsets, Auto Stick
Gear Ratios
1st
3.58
2nd
2.05
3rd
1.32
4th
0.97
5th
1.10
6th
0.91
Reverse
4.84
Final-drive Ratio
4.53 with gears 1-4; 3.24 with gears 5-6 and Reverse
Overall Top-gear
2.95
DRIVETRAIN
Front-wheel Drive
Standard with all engines
DIMENSIONS AND CAPACITIES
General
Wheelbase
2765 (108.9)
Track, Front
1570 (61.8)
Track, Rear
1570 (61.8)
Overall Length
4850 (190.6)
Overall Width
1808.4 (71.2)
Overall Height
1497 (59.0)
Fuel Tank Capacity, L (gal.)
64.0 (16.9)
Curb Weight, kg (lbs.)
2.0-liter Turbo-Diesel Engine: 1560 (3432)
2.0-liter Turbo-Diesel Engine (DCT): 1595 (3509)
2.4-liter V-6 Engine: 1480 (3256)
2.7-liter V-6 Engine: 1520 (3344)

8
SEBRING SEDAN
Information is current as of September 1, 2009
www.media.chrysler.com
Gross Vehicle Weight, kg (lbs.)
2.0-liter Turbo-Diesel Engine: 2085 (4587)
2.0-liter Turbo-Diesel Engine (DCT): 2085 (4587)
2.4-liter V-6 Engine: 2040 (4488)
2.7-liter V-6 Engine: 2040 (4488)
Maximum Trailer Mass (braked),
kg (lbs.)
2.0-liter Turbo-Diesel Engine: 1500 (3300)
2.0-liter Turbo-Diesel Engine (DCT): 1500 (3300)
2.4-liter V-6 Engine: 1000 (2200)
2.7-liter V-6 Engine: 1000 (2200)
Maximum Trailer Mass (unbraked),
kg (lbs.)
2.0-liter Turbo-Diesel Engine: 450 (990)
2.0-liter Turbo-Diesel Engine (DCT): 450 (990)
2.4-liter V-6 Engine: 450 (990)
2.7-liter V-6 Engine: 450 (990)
Maximum Tounge Load, kg (lbs.)
2.0-liter Turbo-Diesel Engine: 150 (330)
2.0-liter Turbo-Diesel Engine (DCT): 150 (330)
2.4-liter V-6 Engine: 100 (220)
2.7-liter V-6 Engine: 100 (220)
(d) All dimensions measured at curb weight with standard tires.
ACCOMMODATIONS
Seating Capacity - F/R
2/3
Total Interior Passenger Volume,
cu. m (cu. m)
2.9 (102.5)
Front
Head Room w/o Sun Roof
1000.1 (39.3)
Head Room w/Sun Roof
946.7 (37.3)
Leg Room
1078 (42.4)
Shoulder Room
1432.9 (56.4)
Hip Room
1357.8 (53.5)
Seat Travel
260 (10.2)
Rear
Head Room
975.6 (38.4)
Leg Room
919.2 (36.1)
Shoulder Room
1431.6 (56.4)
Hip Room
1351.0 (53.2)
Knee Clearance
49.4 (1.9)
Cargo
DIN Trunk Volume, cu. m (cu. ft.)
0.441 (15.57)
BODY/CHASSIS
Layout
Transverse front engine with front-wheel drive
Construction
Steel unibody
SUSPENSION
Front
Independent MacPherson strut, coil spring over gas-charged shock
absorbers, stabilizer bar
Rear
Multi-link independent with coil springs, link-type stabilizer bar,
gas-charged shock absorbers and isolated rear suspension cradle