Chrysler Jeep Baby Trike User manual

®
®
a
bc
d
e
f
g
h
i
Jeep Baby Trike
Parts
a Rear wheels
b Frame
c Basket
d Seat unit
e Front wheel unit
f Handlebars
g Backrest unit
h Parent handle
i 1x screw for front wheel
j 1x screw for handle bars
WARNING ADVICE
• The assembly is to be carried out by adults only.
• Keep parts and hardware that have not been assembled yet, away from children.
• Make sure that the trike has been assembled completely and correctly before it is used.
• Never leave your child unsupervised. This product should only be used under adult
supervision.
• Your child should wear shoes at all times while using the trike.
• Never use on stairs, on the road, on slopes, near: holes, swimming pools or other
bodies of water.
• This product is designed for use by one child only, do not let more than one child
at a time on this product.
• The maximum load on the Jeep Baby Trike is 25kg.
• Maximum load in the basket is 3kg.
• This product requires regular maintenance and inspection. Do not use the product
if breakages or damage of any kind are found.
• Born with Style declines liability for any personal harm or damage to objects ensuing
from the improper and/or incorrect use of the products.
CARE & MAINTENANCE
• Keep the product in a dry place. If it gets wet, dry the metal parts to prevent rusting.
• Clean plastic and metal parts with damp cloth or a light detergent. Do not use solvents,
ammonia or petrol.
• If the product has been used on the beach, clean it so as to remove sand or salt from
the mechanisms and wheels.
u
Jeep®is a registered trademark of Chrysler LLC and is used under license by Born With Style.
©Chrysler LLC 2007.
jJeep Baby Trike
Instructions
®
Born With Style
PO Box 789 Gladesville NSW 1675
Ph: 02 9816 3837 Fx: 02 9816 3778
www.bornwithstyle.com.au

1
2
3
4A
B
56
A
B
B
A
1. Use a screwdriver (not
included) to unscrew the two
screws from the frame.
Fasten both rear wheels
onto the frame with the
screws provided.
2. Push the trike frame into
the front wheel unit. Ensure
that the wheel guard and
spring are attached to the
front wheel unit.
Secure the front wheel unit
with the screw provided
(screw - i) See parts list on
back page.
3. Push the handle bars into
the front wheel unit from
above.
Secure the handlebars by
fixing the provided screw.
(screw - j) See parts list on
back page.
4a. To fasten the seat undo
the screw from the seat unit
and put the seat onto the
frame. Move forwards or
backwards to desired position
Screw the seat until it is firmly
in place.
4b. Fasten the basket onto
the trike frame by clicking it
onto the rear wheel bar.
5a. Push the backrest unit onto the
frame until it engages with a click.
(Make sure that it cannot be pulled off)
5b. Push the parent handle into the
backrest unit by pushing the button in
and pressing down until it clicks into
place.
6a. To unload basket tilt downwards.
6b. Hand brake is located on the right
hand side of the trike.
Freewheel Function
with parent handle
Speed controlled by pedal
To Assemble Trike:
To Secure Child in Trike:
1. Hook shoulder straps
to waist belt
3. To fasten restraint system
buckle - push together.
Be sure both buckles are
fastened to secure child safety.
4. To unstrap restraint
system buckle - press
tabs to release.
2. Hook the waist belt to
the buckle.