ISLABIKES luath pro series User manual

Luath Pro Series
Frame number
Please make a record of your frame number. This is a combination of
letters and numbers unique to your bike stamped to the underside of the
frame. This is required by police and insurance companies in case of loss.
Frame
number
www.islabikes.co.uk
Luath Pro Series
Owner’s manual

Luath Pro Series
1. Brake levers
2. Brake calipers
3. Rotors
4. Saddle
5. Seatpost
6. Seatpost clamp
7. S a d dl e c l a m p
8. Stem
9. Stem bolts
10. Headset
11. Headset spacers
12. Headset adjuster bolt
13. Handlebars
14. STI lever
15. Rim
16. Spokes
17. Tyres
18. Chain
19. Rear derailleur
20. Cassette
21. Frame
22. Fork
23. Cranks
7
3
1
9
10
11
12
13
5
2
15
16
17
19
18
20
21
22
23
4
14
6
8
E-mail: [e-mail] Telephone: [phone]
Recommended torque settings
All stem bolts 5Nm
Saddle clamp bolts 10Nm
Seatpost clamp 5Nm
Crank bolts 35Nm
Pedals 30Nm
Wheel bolts 8Nm
Caliper bolts 9Nm
Rotor bolts 6Nm
Rear derailleur 6Nm
Spares and replacement parts
We carry stock of replacement parts for your Islabike including inner
tubes, tyres and grips. Please visit our website for a list of readily
available spares: www.islabikes.co.uk/products/accessories
We only recommend using genuine parts for safety critical components
e.g. brake cables, brake blocks and bolts.
If you can’t find what you are looking for or are unsure of any
compatibility for older models, please contact our technical support team
by phone or email or see our online Info Hub.
techsuppor[email protected]o.uk
[phone]
www.islabikes.co.uk/info-hub

Luath Pro Series
Drivetrain
The drivetrain is a category of components made up of the chain, cranks,
cassette or Cassette and pedals. These components work together to
drive your Islabike forward. These are crucial in maintaining the optimum
performance and life of your Islabike. To keep these running smoothly we
advise the following.
Chain cleaning and lubricating – We recommend cleaning and
lubricating your chain weekly or after washing/rain. To clean your
chain, simply use soapy water to wipe over your chain and rear
derailleur then dry with a cloth. To apply fresh oil, gently apply
any general bicycle oil direct whilst simultaneously turning the
cranks backwards to ensure full chain coverage. After full coverage
wipe off any surplus with a cloth.
Gears
Your Islabike has had its gears adjusted prior to delivery. These should be
checked periodically or after a fall for correct operation.
Quick check
Ensure your rear derailleur hanger is not twisted. Place your
Islabike in gear 1 or the biggest sprocket and look from the rear.
Look out to see if the rear derailleur is fouling the spokes or looks
twisted
If your gears are not working correctly or you think they have an issue,
consult your local bicycle shop or contact our technical support team:
techsuppor[email protected]o.uk.
E-mail: [e-mail] Telephone: [phone]
Step 1 of 5
Removing front wheel packaging
1. Remove front wheel protection
packaging
2. Remove fork and brake caliper
plastic protection packaging
Do not pull brake when caliper spacer is removed. Please
keep caliper spacer for transportation when wheel is removed

Luath Pro Series
Step 1 of 5
Removing front wheel packaging
continued
3. Install front QR from pedal box
E-mail: [e-mail] Telephone: [phone]
Tyres and tubes
Tyre wear - Regularly check tyres for general wear and tear. Over time
your tyres will become more worn and the tread depth will diminish, you
may also note damage to the sidewalls. This can make the tyres more
susceptible to punctures.
Tyre pressure – Regularly check the tyre pressures on your Islabike as
they will gradually lose air over time. To check simply push your thumb
hard into the tyre, if you can touch the rim the tyre will require more air.
Alternatively, most quality bicycle track pumps feature a pressure gauge.
Your Pro Series bike is supplied with Crest rims. You must not
exceed the marked 45PSI as illustrated on the rims. To inflate
presta valves you must first open the valve by unscrewing and
tapping the valve end to relieve it if stuck. Inflate to correct pressure
and then carefully re-tighten to close the valve
Valve closed Valve open

Luath Pro Series
Wheels
Perhaps considered one of the greatest inventions and key to your bike’s
performance are its wheels. Here is some advice and checks to help keep
them rotating.
Rim trueness – Depending on the type of riding your child does your
bike’s wheels may become damaged or untrue due to an impact whilst
riding. This means they will not spin straight and can wobble from side to
side. If for any reason the wheels do become untrue, they can easily be
repaired by a qualified cycle mechanic. Please contact us
on [phone].
Hubs – Your hubs are fitted with sealed cartridge bearings. These
cartridge bearings are not adjustable or serviceable and should be
replaced when they become worn.
E-mail: [e-mail] Telephone: [phone]
Step 2 of 5
Securing front wheel
Tighten
1. Put front wheel into the fork.
Ensure quick release (QR) lever
is not on gear side. Check this
matches rear
2. Hold QR lever in fully ‘open’
position and turn nut
clockwise. Do not fully
tighten nut

Luath Pro Series
Step 3 of 5
Securing front wheel continued
The QR lever should start to feel tight at 45 degrees as you close
– if it is too tight or too loose can adjust by holding lever ‘open’
again and turning nut
3. Clamp the QR lever to fully ‘closed’ position towards rear of bike
Check front wheel is correctly installed by lifting the handlebar and
striking wheel to ensure it does not move
E-mail: [e-mail] Telephone: [phone]
Disc brakes
Considered one of the most important safety features of your Islabike. It is
a good habit to check the brakes on a regular basis. This should be done
depending on the type, frequency or duration of riding. If your bike has not
been used for a period of time we recommend a quick check before riding.
Brake operation - Pull on one brake lever at a time and take a closer look
at the brake pads. Check to see if they are touching the discs evenly when
applied. If the pads are not contacting the discs correctly, they are uneven,
rubbing or feel spongy to apply please contact our technical support team
on [phone].
Brake pad wear and replacement - Disc brake pads are subject to wear,
depending on usage and conditions. Eventually they will need replacing.
Brake pads must be replaced if the total thickness of the backing plate and
pad friction material is less than 3mm.
Riding with backing plate and pad friction material less than
3mm can result in reduced braking performance, crash, and/or
death
Pads fitted as standard are organic compound. We
recommend replacing with the same compound to maintain
performance

Luath Pro Series
Maintenance
Keeping your bike clean and maintained comes with many benefits. Not
only will your Islabike perform better but it will be safer, last longer and look
great. To do this we have listed some regular checks to help you along the
way. Of course, if you are unsure of anything we strongly recommend you
seek professional advice or contact us.
Firstly, moving parts on your cycle will need lubricating from time to
time. Weather conditions are generally the biggest factor that determine
frequency of maintenance and lubrication. However, it is also heavily
dependent on the frequency, type and duration of riding.
Component Lubricant Frequency
Chain Oil Weekly or after washing / rain
Rear derailleur Oil Weekly or after washing / rain
Brake / Gear cables Oil Weekly or after washing / rain
Wheel bearings n/a Sealed bearings
Pedals n/a Sealed bearings
Headset n/a Sealed bearings
Bottom bracket n/a Sealed bearings
E-mail: [e-mail] Telephone: [phone]
Step 3 of 5
Handlebar set up
1. Turn handlebars clockwise and align with front wheel
2. Tighten stem clamp bolt Max. 5Nm
Failure to correctly tighten stem clamp bolt may result in serious
injury or death. If in doubt, please consult our technical support
team on [phone]

Luath Pro Series
Step 4 of 5
Pedal installation
1. Right pedal – rotate axle towards front of bike.
Tighten max. 30Nm
2. Left pedal – rotate axle towards front of bike.
Tighten max. 30Nm
Please ensure you identify the left and right pedals
before installing
E-mail: [e-mail] Telephone: [phone]
Guarantee
Your Islabike comes with 5 years guarantee on frame and forks and a 2 year
guarantee on parts. This covers faulty manufacturing, but not normal wear
and tear. This guarantee only applies to the original purchaser of the bike.
Your statutory rights are not affected by the guarantee
Ex-display / Demo: 5 years frame and forks / 2 year parts
Second hand: 12 months frame and forks
As with all mechanical components, the bicycle is subject to
wear and stress. Different materials and components may react
to wear or stress fatigue in different ways. If the design life of a
component has been exceeded, it may suddenly fail, possibly
causing injuries to the rider. Cracks and scratches or a change
of colour could indicate that the design life of the component has
been reached and it should be replaced. Extra care should be
taken in inspection of parts that are subjected to high levels of stress
Our bikes have been vigorously tested and exceed the required
standards. However, use in hazardous conditions, including
changeable and uneven surfaces can exert high and unpredictable
loads on the bicycle and any components fitted to it. Lack of rider
skill and experience can add to these loads, leading to the
possibility of serious damage to the bicycle and injury to the rider.
If you choose to use your bicycle in these conditions, then please
carry out more frequent and thorough maintenance and checks.
Carry out regular inspections of the frame, fork, stem, cranks and
handlebars for signs of damage, and discontinue use immediately
and contact [e-mail] if anything untoward is noted

Luath Pro Series
User guidelines
This Pro Series Islabike is designed specifically for sanctioned
races and off-road events. Your Islabike has not been supplied with
the relevant lighting and warning devices to allow for public highway
use. If you intend for this bike to be used on public highways, please
fit with relevant lighting and warning devices that conform to national
regulations in the country of intended use. If in doubt, please contact
our technical support team on [phone]
Your Luath Pro Series has been designed to be ridden on paved,
unpaved, gravel roads and off-road trails with moderate gradients.
Contact with irregular terrain and loss of tyre contact with the
ground may occur. Drops are intended to be limited to less than
15cm. Although we test our bikes beyond their intended weight and
usage, the maximum safe combined rider and luggage weight limits
are as follows:
• Luath 24 Pro = 52Kg
• Luath 26 Pro = 54Kg
• Luath 700 Pro = 65Kg
It is not possible to make a bike that is never going to be damaged
in an accident. If your child uses their bike beyond its limitations,
there is a high risk of failure which could result in serious injury or
death. Bikes that are used competitively should be subject to more
frequent and rigorous checks. Take particular care to check the
frame tube junctions and welds as well as all the components for
damage or excessive wear. If in any doubt, please contact
our technical support team or take it to a qualified cycle mechanic
for inspection
• Dirt jumping • Downhill
• BMX • Slalom
• 4 x cross
E-mail: [e-mail] Telephone: [phone]
Step 5 of 5
Adjust saddle height
1. Loosen seatpost clamp
2. Move to desired height
3. Tighten clockwise max. 5Nm
Seatposts are clearly marked with minimum insertion mark. Please
do not raise saddle above this line

Luath Pro Series
Safety first
Before you head off we would like to give you some advice for safe cycling.
If you are the responsible adult, parent or guardian we recommend the
following precautions.
If you choose for your child to wear a helmet, ensure that
it is adjusted correctly in accordance with the manufacturer’s
instructions
Ensure your child is wearing sturdy footwear and nothing can
become entangled in the pedal or drivetrain
Avoid riding by any busy streets or highways
We pride ourselves on light action brakes, if your child is
unfamiliar with cycling or has used other bikes previously our
brakes will be more responsive. To check your child can come
to a stop safely using the brakes, ask them to walk beside the
bike and pull the brakes to feel their responsiveness
Ensure that your child familiarises themselves with their new
bicycle in a safe environment
Your Islabike is set up so that the right brake lever operates the
front and the left operates the rear. if the destination
country drive on the right hand side of the road, we set up the
bike so that the right hand operates the rear brake
E-mail: [e-mail] Telephone: [phone]
Be aware braking performance and grip will be drastically
reduced in wet conditions
Always observe national legal requirements if riding on public roads
Tumbles are an inevitable part of growing up and riding a bike.
Sometimes the bike can get damaged, so it is very important
to inspect if an accident occurs. In particular, check the following:
- Wheel truness
- Handlebar tape
- Brake discs
- Saddle damage
- Gear alignment