CineRAID Home CR-H458 User manual

1
Quick Start Guide
Home CR-H458
4-Bay Portable RAID Tower
EXTERNAL 4 BAY SATA RAID
USB3.0 +eSATA ENCLOSURE

2
Package contents
Please check the package contents when you open the package.
1. CineRAID Home 458 main unit
2. USB 3.0 Cable
3. Power Adapter
4. Software & User Manual CD
5. eSATA Cable
6. AC Power cord
7. This Quick Start Guide
Main
body X1
USB3.0
cable X1
Power
Adapter
User
Manual CD
eSATA
cable X1
Power
Cord

3
Remove items in the package

4
To install the Hard disks
Please remove the plug from the power supply outlet before
assembling the hard disk, it will cause an electric shock and/or
damage if not disconnected.
1. Press 2 blue door latches inward to release the
tray lock, and then pull out the tray.
2. Put the HDD on the tray and make sure the HDD
screw holes on the bottom are aligned to the 4
posts on the tray.
3. Lock the HDD in the tray by pressing the side
plate onto each side of the tray, and connect with
the HDD.
4. Slide the installed trays back to the enclosure,
a click sound will be heard to confirm the tray is
locked in the enclosure. Then connect the eSATA
or USB 3.0 cable and turn ON the device

5
Connect Home CR-H408 to the computer
The HDD Power setting.
The HDD Power setting DIP S/W on the rear side can set the power
connection of each individual HDD installed in CR-H408, the HDD Power
setting provides excellent protection on the HDD which is not working.
Each DIP switch controls each of 4 HDD trays

6
To RESET RAID mode before RAID mode setting
Setting the RAID mode

7
RAID Mode Chart
The Mode Function S/W definition
ITEM
S/W 1
S/W2
S/W3
S/W4
MODE
1
OFF
ON
ON
ON
RAID0
2
OFF
ON
ON
OFF
RAID1/RAID10
3
OFF
ON
OFF
OFF
RAID3
4
OFF
OFF
ON
OFF
RAID5
5
OFF
OFF
ON
ON
CLONE
6
OFF
ON
OFF
ON
LARGE
7
OFF
OFF
OFF
OFF
NORMAL

8

9
The Mode Setting via RAID Manager software.
Home CR-H458 comes with a RAID Manager software disk.
Insert the CD onto CD-ROM drive of you computer, then
click “CineRAID”folder in the CD, double click on “Setup”to
run the Management software installation:
The display screen will pop up the Installation Wizard dialog
box, click “Install”to start software installation; click “Finish”
after the installation is done

10

11

12
To set the RAID mode with RAID Manager software, click
the RAID Manager icon to run the program, then follow
the instructions on the RAID Manager dialog box to set the
RAID mode by PC
For Technical Support
Email: [email protected]
Telephone: [phone] Ext.107
FAX: [phone]