Cino FuzzyScan F790WD User manual

1
Getting Familiar with Wi-
--
-Fi Scanner
Thank you for choosing Cino FuzzyScan Wi-Fi Cordless Scanner. Powered
by the 802.11 WLAN technology, it is not only easily integrated into an
existing enterprise wireless network, but also can communicate with the
remote host in real time. The Cino Wi-Fi scanner is an ideal and
cost-effective solution to fulfill the needs of expandable wireless data
collection. It does provide a reliable enterprise-class wireless connectivity
with true business value.
This document provides an easy reference for installation and operation
purpose. For more reference material, please visit our web site for details.
F790WD & L780WD Series Scanner
The Navigation Key provides up, down, left and right 4-direction
navigation. And the Center key is used to launch an application, select
an item, or activate the Virtual Keyboard.
HB2100 Charging Cradle
LCD Display
Scan Window
Trigger
Reset Button
Left Function Key
Navigation Key
Right Function Key
Beeper ole
Link Indicator
Status Indicator
Battery Cavity
End Cap
Power Indicator
Reserved
USB Bus Power Switch
USB Interface Port
DC Power Jack

2
reparations before Use
Install the Battery
Charge the Battery
Use USB Bus ower
Choose an appropriate
plug and slot it into the
power adapter cavity until it is locked. Then
plug the AC power plug into the AC wall socket.
Plug the DC power cord of power supply unit
into the DC Jack of charging cradle.
Please
make sure
the power indicator of charging
cradle turns steady blue.
Place the scanner onto
the cradle. The status
indicator of scanner will turn steady red
if the
battery is not fully charged. When the battery is
fully charged, the status indicator of scanner
will
flash green at regular interval.
For
first use, please charge the new battery
pack for 8 hours prior to use.
Ensure the battery contacts
of the battery pack
are facing the charging contacts inside the
battery cavity.
Slide the battery pack into the battery cavity
until hearing a click soun
d before locking it with
the end cap. If the battery pack still has power,
the scanner will be powered on and give 4
beeps. And you will see the “Date”
setup
screen after the welcome message.
Secure the end cap with the screw provided.
Please note that
the battery pack has to be fully
charged before using.
If a USB 3.0 Host Port
is available in your host
machine, both battery charging and regular
operation can be supported by the USB Bus
Power without using external power supply.
If you want to use this feature, please
slide the
USB bus power switch to “ON”. Then c
onnect
the cradle and host machine via USB cable.
If only a USB 2.0 Host Port
is available in your
host machine, you are recommended to use
power supply as power source.

3
Install Necessary Software
Before you start using the Wi-Fi scanner, you are recommended to install
following software into your host machine.
Cino WaveCentre
The WaveCentre is a useful Windows-based wireless management utility
together with an IP virtual COM software driver. Once you installed
WaveCentre into your host machine, it can create a virtual COM port for each
connected Wi-Fi scanner corresponding to its IP address. Then the Wi-Fi
scanner will work as a local serial device of the remote host.
FuzzyScan Wi-Fi PowerTool
By using the FuzzyScan Wi-Fi PowerTool, you can create Wi-Fi profiles,
change configurations and upgrade firmware with ease. Please note that you
have to install the USB virtual COM software driver before using the
PowerTool.
Required Information for Network Setting
Before connecting the Wi-Fi scanner to your desired remote host, you have
to create a Wi-Fi profile for your scanner. You will need following information
for wireless network setting before creating a new profile.
SSID
The SSID is an 802.11 service set identifier of Independent Wireless Host or
Access Point (AP).
Operation Mode
The Wi-Fi scanner supports both “Infrastructure” and “Ad-Hoc” modes.
Please note that if you select Ad-Hoc mode, you are suggested to use the
Static IP. And the Gateway and Subnet Mask have to be the same as the
remote host.
Region and Channel
The region is where the Wi-Fi scanner is used, and the channel number must
be the same as the channel setting of AP or the remote host.
Security
The Encryption and Authentication will be used to communicate with the AP
or the remote host, such as WEP, WPA and WPA2.
IP Type
Both Static IP and DHCP can be used in your wireless network. But you are
recommended to use Static IP for better management purpose.
Remote IP Address and Port
The Remote IP Address is an IP address of the remote host. And the Port will
be a listen port of WaveCentre used to communicate with your Wi-Fi
scanners.
Local IP Address
The Local IP Address is an IP address of the Wi-Fi scanner.

4
Getting Started
Virtual Keyboard
A unique virtual keyboard has been provided by the Wi-Fi scanner to fulfill
various inputs of alphabet, number, symbol and ASCII value. You can use 4
toggle keys ( ) to switch into different keyboard
layout before using the navigation key to locate your desired inputs for
information entering.
Date and Time Setup
After installing the fully charged battery pack into the battery cavity, the
scanner will be powered on and booted automatically. You will hear power on
beeps and the “Date” setup screen will be displayed after the welcome
message.
Use the virtual keyboard to complete the date
information input, then press “Enter” (L key) to
save the setting.
The “Time” setup screen will be displayed after
the “Date” setup screen. Use the virtual keyboard
to complete the time information input, then press
“Enter” to save the setting.
Once you completed the Date and Time settings, a “No Profile” message box
will pop-up to remind you there is no profile existing in your Wi-Fi scanner.
Press OK to enter the Desktop (main screen) then go to “SETUP” to create a
new Wi-Fi profile.
Alphabet Keyboard
ASCII Keyboard
Symbol Keyboard

5
Desktop
The Desktop is the main screen of Wi-Fi scanner which contains three parts,
including Status Bar, Main Menu, and Function Bar.
Power Switch
Main Menu
Status Bar
Function Bar
Signal
Strength
Time
Battery Status
Link Status
Title
Connecting to the server
Disconnected
Almost no signal
Very low signal
Low signal
Medium signal
Good signal
Low battery
Battery is 20% full
Battery is 40% full
Battery is 60% full
Battery is 80% full
Battery is fully charged
Battery Charging
Signal Strength
Battery Status
No Wi-Fi Profile
COM Port Close
COM Port Open
Link Status

6
Configure Your Wi-Fi Scanner
Once you entered the “SETUP” from the main menu of Desktop, you will find
all available configuration items, including Wi-Fi Profiles, System Settings,
Scanner Settings, Interface Settings, Online Scanning, Batch Scanning and
Advanced Settings.
Wi-Fi rofiles
Here, not only you can create a new Wi-Fi profile, you can also edit or delete
the existing Wi-Fi profiles.
System Settings
In System Setting, you can set or change the date and time, device name,
language, LCD brightness, LCD backlight duration, key tones, administrator
and user password and so on.
Scanner Settings
In Scanner Setting, you can set or change the details of each bar code
symbology and all available options of Operation and Output.
Interface Settings
In Interface Setting, you can define the detailed working behaviors of Wi-Fi,
USB COM and USB HID.
Online Scanning
In this setting, you can configure all available options of Online Scanning,
including barcode type indication, display font size, record suffix,
transmission format, and all detailed controls of Host ACK function.
Batch Scanning
In this setting, you can configure all available options of Batch Scanning,
including desired input fields with validation, transmission sequence, field and
record delimiters, timestamp format, “Auto Save” and “Auto Delete” functions,
link control, transmission interface and so on.
Advanced
In Advanced Setting, you can enter Host Link Mode for connecting the Wi-Fi
scanner to FuzzyScan Wi-Fi PowerTool, and perform Factory Default, Master
Default and System Reset. Moreover, you are able to turn on/off the Wi-Fi
radio through the setting of Radio Control.

7
Connecting the Wi-Fi Scanner
To integrate FuzzyScan Wi-Fi scanner into your application, the simplest way
is to use Cino WaveCentre together with the scanners. Once you installed
WaveCentre into your desired host machine, it can create a virtual COM port
for each connected Wi-Fi scanner corresponding to its IP address. All
connected Wi-Fi scanners will work as local serial devices of the remote
host.
Before you connect the Wi-Fi scanner to a remote host, you have to create a
correct Wi-Fi profile for the Wi-Fi connection. There are two ways to create
Wi-Fi profiles. The easy way is to use the scanner “SETUP” to create a new
profile. If you want to create multiple profiles at the same time, you may
consider using Cino FuzzyScan Wi-Fi PowerTool.
Once you collected all required information for network setting, please follow
the steps below to establish the connection between the Wi-Fi scanner and
the remote host.
Install the WaveCentre into your host machine then double click its icon to
launch WaveCentre.
Find out the IP address of the remote host and decide the listen port of
WaveCentre. By default, the listen port is 6300. You can change the port
number to meet your WLAN setting.
Ensure the scanner is activated within radio range then enter “SETUP”
from the Desktop main menu. Select “Wi-Fi Profiles”, then press “New”
(L key) to add a Wi-Fi Profile. Select “Auto Search”, the scanner will
perform “Searching” to find out all discoverable Access Points and
Independent Wireless Hosts, and provide you a list.
For “Infrastructure” mode, select a suitable AP which is able to connect to
your remote host then complete the profile setting. If you want to build a
peer-to-peer connection by using Ad-Hoc mode, please select your
desired remote host then complete the profile setting as well.
Once you completed the Wi-Fi profile setting, the scanner will try to
connect the remote host automatically. You will see the “Connecting
to ……” screen, the scanner will give continuous short clicks and the link
indicator of scanner will flash blue quickly during connecting process.
If your Wi-Fi setting is correct and there is no mistake during link process,
the link process will be completed and you will hear 4 beeps in ascending
tone. You will see the link indicator of scanner giving 1 blue blink per 2.5
seconds to indicate the scanner is in radio-connected state.
If you have difficulty to make a successful link, please go to “TOOLS” to
run “Link Diagnostic” to get the detailed report of each link step for
locating problem.

8
Work with Cino WaveCentre
After you have successfully connected the Wi-Fi scanner to WaveCentre
running on your remote host, you will see the device name and IP address of
Wi-Fi scanner shown on the console of WaveCentre. And a “Flag” icon
will be displayed to indicate the Wi-Fi scanner is connecting to this host
machine.
By default, each connected Wi-Fi scanner work as a local serial device of
your remote host. You are able to design your application without involving
complicated TCP/IP (socket) programming. This is helpful for your application
to work with multiple scanners.
HID Conversion
To enable this feature, please select the HID check box. By doing so, all
incoming data from that scanner will be converted as HID keyboard inputs.
This is very useful for using the Wi-Fi scanner with your existing application
without modification.
Function List of Wi-Fi Scanner
The following tree view provides you a function list of your Wi-Fi scanner.
DESKTOP (Main Screen)
ONLINE (Online Scanning)
BATCH (Batch Scanning)
SETUP (On-scanner Configuration)
Wi-Fi Profiles / System Settings / Scanner Settings
Interface Settings / Online Scanning / Batch Scanning
Advanced
TOOLS (Useful Tools)
Site Survey / Link Diagnostic / Data Validation
Scan Test / System Test / Device Information / User Settings

9
Online Scanning
After connecting the Wi-Fi scanner to the remote host, you are able to
perform the online scanning function by entering “ONLINE” from the main
menu of Desktop. You will see following screen shown on the LCD display of
scanner, and you are ready to scan a barcode. Under this mode, all scanned
barcodes will be displayed on the screen and sent to the remote host
concurrently.
If the scanner was unable to read very poor or invalid barcode, you can press
the “Keyboard” icon to activate Virtual Keyboard for data entering.
To press “Func” (L key), you are able to view the
scan logs and configure the display option.
Options
Under Options, you can configure “Barcode Type
Indication”, “Font Size” and so on.
Scan Logs
All scan logs will be automatically recorded until
the log storage is full. If necessary, you can enter
this to view all scan logs.
Host Acknowledgement
For more Reliable Data Transfer, the useful Host
Acknowledgement function provides a helpful
handshaking protocol to ensure the scanned data
is successfully received by host application. Once
this function was enabled, the scanner will wait
for an ACK or a NAK message issued by the host
application after each scan. And the scanner can
not scan any barcode before it completes the
handshaking process.
If the scanner received an ACK message, a
“Check” icon will be shown on the screen to
identify the scanned data has been successfully
received by the remote host. If the scanner
received a NAK message or the ACK timeout
occurred, a “Cross” icon will be shown on
the screen of the scanner.
To enable this function, please go to “SETUP”
then “Online Scanning” to configure related
settings, such as Transmit Format, Host ACK
Timeout, NAK Retry Count, ACK Indication, and
ACK Timeout Indication.

10
Batch Scanning
Thanks to the Batch Scanning function, the scanner is capable of storing all
input data into memory storage. It is an ideal cost-effective solution to fulfill
most inventory applications.
Configure Batch Scanning Options
Before you start to use batch scanning, please enter “SETUP” then select
“Batch Scanning” to configure all available options listed below. Moreover,
the “Auto Save” and “Auto Delete” functions will help you to simplify the
routine operation of data collecting.
Input Fields
Besides the field of “Item No.”, three more input fields are available for choice,
including “Quantity”, “Location” and “Timestamp”. By default, both “Item
No.” and “Quantity” fields are enabled. Please note that if you changed the
composition of input fields, all stored data will be DELETED.
Validation
You can set the desired input range of each field. The scanner will do the
validation automatically after the inputs of each field are completed.
Field and Record Delimiters
Both field delimiter and record delimiter can be changed to meet your
application demand.
Transmission Sequence
The transmission sequence of each field can be re-arranged to meet your
needs.
Transmission Interface
The scanner is preset to transmit all stored data through Wi-Fi. Alternatively,
you can transmit the stored data through physical USB interface by changing
the transmission interface to USB COM or USB HID. In this case, a charging
cradle has to be used together with your scanner.
Auto Save
After completing the inputs of each record, the scanner will save the data into
storage automatically then go to next record input immediately. You do not
need to press “Save” (L Key) to save data. If you still prefer to save data
manually, please disable this Auto Save function.
Auto Delete
The scanner is preset to keep all stored data after data transmission in case it
needs to be retrieved later. You have to delete all records manually. If you
prefer the scanner to perform “Auto Delete” after data transmission, please
enable this function.
Link Control
For power saving, the Radio can be disabled during batch scanning. When
you want to transmit the data via Wi-Fi, the scanner will activate the Radio
and re-connect automatically.

11
Run Batch Scanning
After completing all necessary settings of batch scanning, you can enter
“BATCH” from the main menu of Desktop to perform batch scanning.
Under this mode, all input data will be stored until
the memory storage is full. If the “Auto Save” is
enabled, all data will be saved automatically after
the inputs of each record are completed. You can
continue to the next record input immediately.
Navigation Key
For manual inputs, you can use the Navigation
Key to activate virtual keyboard for manual data
entry. Moreover, you can use the navigation key
to browse previous input records as well.
Press “Func” (R key) to enter the function menu
of batch scanning. Then select your desired
function to perform the data transmission or to
manipulate the stored records.
Transmit Data
The scanner is preset to transmit the stored data
through Wi-Fi. During the transmission process,
the scanner will give continuous short clicks and
blue blinks. Then the scanner will give two short
beeps after data transmission is completed.
If you want to transmit the stored data through
USB interface, please make sure a cradle has
been properly connected to the host with a USB
cable. You have to place the scanner onto the
cradle right after you press “Transmit Data”. All
stored data will be transmitted via your specified
interface (USB COM or USB HID).
Transmit and Save
To work with Cino WaveCentre, all transmitted
data can be saved as a “TXT” or “CSV” file into
your desired destination (folder) of the remote
host. Please note that this function is only
available for transmission via Wi-Fi interface.
Delete all Record(s)
If “Auto Delete” function is disabled, the scanner
still keeps all stored data after transmission. You
have to manually delete all stored records by
executing this function.
Default Screen
Input screen with all
available input fields
Function Menu

12
Useful Tools
Enter “TOOLS” from the main menu of Desktop, you can find several useful
tools, including Site Survey, Link Diagnostic, Data Validation, Scan Test,
System Test, Device Information and User Settings.
Site Survey
The Site Survey is a very useful tool for finding all
discoverable Access Points (AP) and Independent
Wireless Hosts within radio range. After the
“Searching” process is completed, a list will be
provided for reference. You can check the detailed
wireless settings of each AP or Independent
wireless host.
Access Point Independent Wireless Device
Link Diagnostic
The Link Diagnostic is a tool for providing detailed
link report. Once you run this tool, you have to
select a desired Wi-Fi profile to perform diagnostic.
After that, a detailed report of each link process
will be provided for reference (see right screen).
It’s very helpful for locating link problem if you
have difficulty to make a successful link.
Data Validation
The Data Validation is a very useful tool for you to check valid input with ease.
You are able to set and store maximum 10 master data for validation. Once
you completed the master data setting, you can scan the barcodes and the
scanner will compare the scanned data for you. If the scanned data is same
as one of master data, a “Check” icon will be shown on the screen.
Otherwise, a “Cross” icon will be shown on the screen instead.
System Test
In System Test, you are able to perform most equipment tests, including LCD
display, light source, LED indicator, buzzer, vibrator and keypad.
User Settings
In User Setting, the user is able to configure frequently used settings, such as
LCD backlit duration control, key tone and buzzer tone settings, and vibrator
control.
Device Information
You can find most detailed information of your scanner, such as model
number, firmware version, MAC address, device name and so on.

13
Useful Features
Remote Control
A complete serial command set has been implemented into the Wi-Fi scanner.
You can use the Remote Control commands to control Wi-Fi scanner(s) from
the remote host. The most useful remote commands are listed below for your
reference.
Remote Message
This command allows you to send message
together with beeping and vibration.
Remote Indication
This command allows you to page the scanner, or
send beeping and vibration from the remote host.
Remote Lock & Unlock
You can use this command to lock or unlock the
scanner remotely. Once you locked the scanner,
the scanner can’t work till you send unlock
command.
How to use remote control
If you used Cino WaveCentre together with your
Wi-Fi scanner, you can easily use all remote
control functions without writing a program. If you
want to use the remote control in your application,
please contact your supplier to obtain a detailed
documentation and SDK for development.
Administrator and User assword
Once you enabled the Administrator Password, the scanner will ask you to
enter the administrator password before you can enter “SETUP” to configure
the scanner. If you enable the User Password, it will help to prevent any
unauthorized use of the scanner. Moreover, you can limit the available
functions for all users.
When the scanner enters into sleep mode, you have to enter administrator
password or user password right after the scanner wakes up. Please note
there is NO master password available. You are recommended to keep your
preset passwords in a safe condition for future use.

14
Indications
Descriptions Link Indicator Beeper
Radio connected 1 blue blink per 3.5 sec. Off
Radio disconnected 3 blue blinks per 3.5 sec. Off
During connection Quick blue blinks Short clicks
Radio connection built 1 blue blink per 3.5 sec. 4 beeps in ascending tone
Radio connection lost 3 blue blinks per 3.5 sec. 4 beeps in descending tone
Data Transmission Quick blue blink Short clicks
Descriptions Status Indicator Beeper
nder charging (on cradle) Steady red Off
Fully charged (on cradle) 1 green blink at regular interval Off
Out of memory 2 red blinks 2 long beeps
Battery power low 1 red blink at regular interval (30sec) 1 beep at regular interval(30sec)
Battery power extremely low 8 red blinks 8 beeps
Good read 1 green blink 1 good read beep
nder Configuration Steady red Off
pgrade state Steady red Short click
Sleep state / Battery no power Off Off
ACK Time-out Indication Off 3 long beeps
Host ACK received Off 1 beep
Error Beep Off 1 long beep
HB2100 Charging Cradle
Center Indicator
Once you supplied the power to the cradle via
power supply unit or USB i
nterface, the center
indicator will be steady blue.
Link Indicator
Status Indicator