CipherLab 1662 User manual

1662/ 1664 Barcode Scanner
Setup barcodes included.
Version 2.22

Copyright © 2011~ 2019 CI PHERLAB CO., LTD.
All r ights reserved
The soft ware cont ains propriet ary inform ation of CI PHERLAB CO., LTD.; it is provided
under a license agreem ent containing rest rictions on use and disclosure and is also
prot ect ed by copyright law. Reverse engineering of the software is prohibited.
Due t o continued product developm ent t his infor m at ion m ay change without notice. The
inform ation and intellect ual propert y cont ained herein is confident ial bet w een CIPHERLAB
and the client and rem ains the exclusive property of CI PHERLAB CO., LTD. I f you find
any problem s in the docum ent at ion, please report t hem t o us in writing. CI PHERLAB
does not warrant that t his docum ent is error-free.
No part of this publication m ay be reproduced, st ored in a ret rieval syst em , or
transm it t ed in any form or by any m eans, elect ronic, m echanical, phot ocopying,
recording or otherwise without the prior wr it t en per m ission of CI PHERLAB CO., LTD.
For product consultancy and t echnical support , please cont act your local sales
represent at iv e. Also, you m ay visit our web sit e for m ore inform at ion.
The CipherLab logo is a regist ered tr adem ark of CI PHERLAB CO., LTD.
All brand, product and service, and tradem ark nam es are t he property of their regist ered
owners.
The edit orial use of these nam es is for ident ificat ion as well as to the benefit of the
owners, with no int ent ion of infringem ent.
CI PHERLAB CO., LTD.
Website: http: / / www.cipherlab.com

IMPORTANT NOTICES
FOR USA
This equipm ent has been t ested and found to com ply with the lim its for a Class B digit al
device, pursuant t o Part 15 of the FCC Rules. These lim its are designed t o provide
reasonable prot ection against harm ful int erference in a resident ial inst allat ion. This
equipm ent generates uses and can radiat e radio frequency energy and, if not inst alled
and used in accordance with the instruct ions, m ay cause harm ful interference t o radio
com m unications. However, t here is no guarantee that int erference will not occur in a
part icular inst allat ion. I f this equipm ent does cause harm ful int erference to radio or
t elevision recept ion, which can be det erm ined by turning t he equipm ent off and on, t he
user is encouraged t o t ry to correct t he int erference by one or m ore of the follow ing
m easures:
 Reorient or relocate t he receiving ant enna.
 I ncrease t he separat ion bet ween t he equipm ent and receiver.
 Connect the equipm ent int o an outlet on a circuit different from t hat to which the
receiver is connect ed.
 Consult the dealer or an experienced radio/ TV t echnician for help.
This device com plies with Part 15 of t he FCC Rules. Operat ion is subject t o the following
t wo condit ions: (1) This device m ay not cause harm ful inter fer ence, and ( 2) this device
m ust accept any int erference received, including int erference that m ay cause undesired
operation.
CAUTION:
Anychangesormodificationsnotexpresslyapprovedbythegranteeofthisdevicecouldvoidtheuser's
authoritytooperatetheequipment.

RFexposurewarning
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
FOR CANADA
This digital apparatus does not exceed t he Class B lim it s for radio noise em issions from
digit al apparat us as set out in the int erference-causing equipm ent st andard ent itled
"Digit al Apparatus," I CES-003 of I ndust ry Canada. This device com plies with Part 15 of
the FCC Rules. Operat ion is subject t o t he following t wo conditions: ( 1) This device m ay
not cau se harm ful int er ference, and ( 2) t his device m ust accept any int erference receiv ed,
including interference t hat m ay cause undesired operat ion.
Cet appareil num erique respect e les lim it es de bruit s radioelect riques applicables aux
appareils num eriques de Classe B prescrites dans la norm e sur le m at erial brouilleur:
"Appar eils Num eriques," NMB- 003 edict ee par l'I ndust rie.
Canada,IndustryCanada(IC)Notices
ThisdevicecomplieswithCanadalicence‐exemptRSSstandard(s).
Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and

(2)thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesired
operationofthedevice.

Canada,avisd'IndustryCanada(IC)
CetappareilestconformeavecIndustrieCanadaexemptesdelicenceRSSstandard(s).
Sonfonctionnementestsoumisauxdeuxconditionssuivantes:(1)cetappareilnedoitpascauser
d'interférenceet(2)cetappareildoitacceptertouteinterférence,notammentlesinterférencesqui
peuventaffectersonfonctionnement.

RadioFrequency(RF)ExposureInformation
TheradiatedoutputpoweroftheWirelessDeviceisbelowtheIndustryCanada(IC)radiofrequency
exposurelimits.TheWirelessDeviceshouldbeusedinsuchamannersuchthatthepotentialfor
humancontactduringnormaloperationisminimized.

ThisdevicehasalsobeenevaluatedandshowncompliantwiththeICRFExposurelimitsunder
portableexposureconditions.(antennasarelessthan20cmofaperson'sbody).

Informationsconcernantl'expositionauxfréquencesradio(RF)
Lapuissancedesortieémiseparl’appareildesansfilestinférieureàlalimited'expositionaux
fréquencesradiod'IndustryCanada(IC).Utilisezl’appareildesansfildefaçonàminimiserles
contactshumainslorsdufonctionnementnormal.

Cepériphériqueaégalementétéévaluéetdémontréconformeauxlimitesd'expositionauxRFd'ICdans
desconditionsd'expositionàdesappareilsportables.(lesantennessontmoinsde20cmducorpsd'une
personne).

FOR HAND-HELD PRODUCT WITH RF FUNCTIONS
The 1662/ 1664 unit ( FCC I D: Q3N- 1662/ 1664) com plies wit h FCC radiat ion exposure
lim it s set fort h for uncontrolled environm ent and m eet s t he FCC radio frequency (RF)
Exposure Guidelines in Supplem ent C t o OET65. The unit has very low level of RF energy
t hat it is deem ed t o com ply wit hout test ing of specific absorpt ion rat io ( SAR).
The 3610 unit ( FCC I D: Q3N- 3610) com plies wit h FCC radiat ion exposure lim its set fort h
for an uncont rolled environm ent . This equipm ent should be inst alled and operated with
m inim um dist ance 20 cm between t he radiat or & body. I t only operat ed in hand- held
used. I f only t ransfer dat a t o t he host cordless, please keep the m inim um distance 20 cm
bet ween m achine & body.
FOR PRODUCT WITH LASER
CAUTI ON
This lase r com ponent em it s FD A / I EC Cla ss 2 laser light at the ex it port . D o not
st a r e in t o b e am .
SAFETY PRECAUTIONS
RI SK OF EX PLOSI ON I F BATTERY I S REPLACED BY AN I N CORRECT TYPE.
DI SPOSE OF USED BATTERI ES ACCORD I N G TO TH E I N STRU CTI ON S.
 The use of any bat t eries or charging devices, which are not originally sold or
m anufact ured by CipherLab, w ill void your warrant y and m ay cause dam age t o
hum an body or the product it self.
 DO NOT disassem ble, incinerat e or short circuit t he battery.
 DO NOT expose t he scanner or the bat tery t o any flam m able sources.
 For green- environm ent issue, it 's im port ant that bat teries should be recycled in a
proper way.
 Under no circum st ances, internal com ponent s are self- serviceable.
CARE & MAINTENANCE
 Use a clean cloth t o wipe dust off the scanning window and the body of t he scanner
as well as t he charging device. DO NOT use/ m ix any bleach or cleaner.
 I f you want t o put away the scanner for a period of time, download the collected data
t o a host com puter when in t he m em ory m ode, and t hen t ak e out t he battery. St ore
the scanner and battery separately.
 When t he scanner resum es its work, m ake sure t he battery is fully charged before use.
 Keep t he scanner away from any m agnet s and m agnet ic fields t o prevent the laser
engine from m alfunct ioning.
 I f y ou shall find t he scanner m alfunct ioning, write down the specific scenario and
consult your local sales represent ative.

DECLARATION CONFORMITY

RELEASE NOTES
Version Date Notes
2.22 Oct. 08, 2019  Modified: Sy m b ologie s Support e d – GS1 DataBar Fam ily enabled
by default ; UPCA Addon 2/ Addon 5 appended
 Modified: Se t u p QR Code – QR Code lim ited
 Modified: 1 .2 .1 Tra nsm it Buffe r – Continuous Decoding set ting
barcodes added
 Modified: 1 .3 LED I n dica t or – Green flashing defined for fully
charged
 Modified: 1 .3 LED I n dica t or – Red flashing 5 t im es indicat es low
bat t ery w ar ning for firm ware upgrade
 Modified: 1 .4 Be eper –Low batt ery warning when the scanner get s
int o download m ode for firm war e upgrade
 Modified: 1 .4 . 3 Low Ba t t e ry Ala r m – t im e interval description
 New: 1 .4 .4 Bell Ring
 New: 1 .7 .8 Mult icode Mode ( 1 6 6 4 Only)
 New: 1 .7 .9 Re le ase M ode
 Modified: 1 .9 D e la y b et w e e n Re- r e a d – Laser m ode added
 Modified: 2 .1 Blue t oo t h® H I D – Alt Com posing added
 Modified: 2 .1 .6 / 2 .4 .5 / 2 .6 .5 H I D Charact er Transm it Mode – By
Character as default
 Modified: 2 .1 .7 Spe cial Ke yboard Fea tur e – “ By pass wit h Cont rol
Character Output for Windows” added
 New sect ion t itle for 2 .1 . 9 H I D Ke yboa r d La you t ( Ap ple & N o n-
Ap ple Sy st e m )
 Modified: 2 .1 .1 0 Tra nsm it Spee d – Fast by default
 Modified: 2 .1 .1 1 BT H I D Slave / Ma st er Sw it ching – Master by
default
 Modified: 2 .3 . 1 Act iva t e Blue t oo t h® SPP M a st e r M ode - QR
Code exam ple
 Modified: 2 .6 . 7 U SB Pollin g I n t e rv al – 4m s by default
 Modified: 3 .1 .1 Connect t o 3 6 1 0 – QR Code exam ple
 Modified: 3 .2 .4 Se cure Sim ple Pairing – enabled by default
 Modified: 4 .1 3 .2 GS1 D at aBa r Om nidire ct iona l ( RSS- 1 4 ) –
enabled by default , Transm it Code I D disabled by default
 Modified: 4 .1 3 .3 GS1 D at aBa r Ex pande d ( RSS Expa nded) -
enabled by default , Transm it Code I D disabled by default
 Modified: 4 .1 3 .4 GS1 D at aBa r Lim it e d ( RSS Lim it e d) - enabled
by default, Tr ansm it Code I D disabled by default
 Modified: change section art icle t o 5 .2 .1 Single Ch ara cte r
Su bst it u t ion ( previous article: Se le ct a Se t for Cha ra cte r
Su bst it u t ion )





New: 5 . 2 .2 M u lt iple Ch a r act e r s Su bst it u t ion
Modified: Appe ndix I - Firm w ar e Upgrade – Low battery warning
when t he scanner get s into download m ode
2.21 Jul. 26, 2017 

Modified: 1 .1 1 – change Addon Securit y Level for UPC/ EAN default
to 10


Modified: 2 .1 . 1 Act ivat e BT H I D & Sele ct Ke yboard Type – ( 87)
Brazilian Port uguese added for PC & Apple


New: 2 .4 .7 USB HI D via 3 6 1 0 Auto- Rconnect ion


New: 2 .5 .5 USB VCOM via 3 6 1 0 Auto- Rconnect ion


Modified: 2 .6 . 1 Act ivat e U SB H I D & Se lect Ke y bo ar d T ype –
(87) Brazilian Port uguese added for PC & Apple


Modified: Cha pte r 4 – sett ing barcodes for disabling/ enabling all
sy m bologies added


New: Appendix VI Ke yboa rd Type One- Sca n Ba rcode
2.20 Jun. 24, 2016 

Modified: 1 .3 – LED indicator descriptions appended ( flashing red for
indicating batt ery capacit y running low and low batt ery voltage)


Modified: 2 .1 .1 – 80 PCAT ( Dutch) keyboard type added


Modified: 2 .1 .1 – 65,66,67,68,69,72,73,75,76,78,79,80~ 86
keyboard t ypes support Apple keyboar d


Modified: 2 .1 .6 – note for turning off iOS Aut o- Correct ion added


Modified: 2 .1 .8 – set t ing barcodes for t oggling Apple keyboard over
BT HI D connect ion added


Modified: 2 .3 .1 – a single 1D barcode for connect ing t o a target
device


Modified: 2 .6 .1 – 80 PCAT ( Dutch) keyboard type added
2.19 Sep. 07, 2015 

Modified: descriptions relat ing t o CD- ROM rem oved


New: 2 .3 .5 BT SPP M ast er H ardw are Flow Cont rol


New: 2 . 3 .6 BT SPP M a st e r Aut o- Rcon nect io n


New: 4 .1 6 .1 EAN - 1 3 Addon M ode s
2.18 Nov. 05, 2014 

New: 1 .2 .4 Re cord Count of M em or y added


Modified: 1 .1 1 – range of Securit y Lev el ( 2~ 30 t im es)


Modified: Appe ndix I I – “ # @RDBATCAP” serial com m and added

2.17 May 09, 2014  New: 1 .2 0 – Serial Num ber St am p
 New: 1 .2 0 .1 – Separator betw een Serial Num ber and Dat a
 New: 2 .1 .1 0 – BT HI D Slave/ Mast er Switching
 New: 2 .1 .1 1 – BT HI D Auto- Reconnect ion
 New: 2 .5 .2 – Act ivat e USB Virtual COM_CDC
 New: 2 .6 .7 – USB Polling I nt er val
 Modified: 3 .2 .2 – length of device nam e changed t o 13 bytes ( m ax.)
 New: 4 .1 1 .3 – GS1 Form at ting, Application ID Mark
 Modified: 4 .1 3 .2 – add GS1 form atting ( Om nidirect ional) barcodes
 Modified: 4 .1 3 .3 – add GS1 form atting ( Expanded) barcodes
 Modified: 4 .1 3 .4 – add GS1 form atting ( Limit ed) barcodes
 New: 4 .1 3 .6 – Field Separator
 New: 4 .1 3 .7 – Application I D Mar k
 New: 4 .2 1 .1 – add GS1 form at ting ( Com posite CC-A/ B) barcodes
 New: 4 .2 1 .2 – add GS1 form at ting ( Com posite CC-C) barcodes
 New: 4 .2 1 .6 – Field Separator
 New: 4 .2 1 .7 – Application I D Mar k
 Modified: Appe ndix I – Notes for upgrading 3610 CPU/ Bridge
firm war e added
2.16 Mar. 06, 2014  Modified: Ca r e & M a int e na nce – “ Keep t he scan ner aw ay from any
m agnet s and m agnetic fields t o pr event the laser engine from
m alfunct ioning.” added
 Modified: 1 .1 .2 - Enable/ Disable the [ Delet e] key barcodes added
 Modified: 1 .1 7 .3 – I llum ination Brightness set up barcode added
 Modified: 3 .2 .2 – Changing Device Nam e barcode added
 Modified: Appe ndix I I – # $ShowScanner, # $SelectScannerN,
#@BEEP,xx, #@RLED,xx, #@GLED,xx, #@VIBR,xx added
 Modified: Appe ndix I I I – rem ove “ Send” from “ CR* / Send/ ENTER* ”
2.15 Jul. 19, 2013  Added: 1 .1 8 .3 Disable H ardw ar e Reset ( set t ing barcodes)
2.14 Jun. 10, 2013  Added: 1 .1 9 M obile Phone/ D ispla y Mode
 Added: 2 .1 .9 Tran sm it Spee d
 Added: 3 .2 .4 Secu re Sim ple Pair ing ( 2.1.9 Sim ple Pairing for
iPhone/ iPad rem oved)
 Added: 4 .1 5 .1 EAN - 8 – Check Digit function barcode added
 Added: 4 .1 6 .3 EAN - 1 3 – Check Digit function barcode added
2.13 Mar. 20, 2013  Add: 2 .3 . 1 Act iva t e Blue t oo t h SPP M a st e r M ode – 2D barcode
for connecting to a target device
 Add: 3 .1 .1 Con nect t o 3 6 1 0 – 2D barcode for connecting t o 3610