CipherLab SmartScan User manual
ScannerConfiguration
SmartScanManual
DOCVersion2.21
Thisdocumentisspecificallydesignedfortheusertoprinttwopagespersheetofpaperwithoptimal
printquality.
Copyright © 2005~ 2008 CIPHERLAB CO., LTD.
All rights reserved
The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided under a
license agreement containing restrictions on use and disclosure and is also protected by copyright
law. Reverse engineering of the software is prohibited.
Due to continued product development this information may change without notice. The
information and intellectual property contained herein is confidential between CIPHERLAB and the
client and remains the exclusive property of CIPHERLAB CO., LTD. If you find any problems in the
documentation, please report them to us in writing. CIPHERLAB does not warrant that this
document is error-free.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical, photocopying, recording or otherwise without the
prior written permission of CIPHERLAB CO., LTD.
For product consultancy and technical support, please contact your local sales representative. Also,
you may visit our web site for more information.
The CipherLab logo is a registered trademark of CIPHERLAB CO., LTD.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in
the United States and/or other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
Other product names mentioned in this manual may be trademarks or registered trademarks of their
respective companies and are hereby acknowledged.
The editorial use of these names is for identification as well as to the benefit of the owners, with no
intention of infringement.
CIPHERLAB CO., LTD.
Website: http://www.cipherlab.com
VERSION DATE NOTES
2.21 Jan. 02, 2008 Larger setup barcodes
2.20 Nov. 30, 2007 New Word template applied
New: 3667 Bluetooth Cradle for 1166/1266
Modified: Auto-Sense mode supported on 1100 only.
New: Appendix III – Host Serial Commands
New: Appendix IV – Upgrading Firmware
2.15 Nov.13, 2006
Modified: Add notice for BT SPP and HID power saving – Please
disable power saving when connecting more than two 1x66
scanners to Bluetooth dongle.
2.14~
2.12
Nov. 06, 2006
Mar. 03, 2006
New: Bluetooth HID supports Japanese keyboard.
2.11 Jan.27, 2006
Modified: Typo errors corrected.
2.10 Jan.18, 2006
Modified: Bluetooth HID doesn’t support the following functions on
PDAs running Windows CE – Capital Lock Setting: Auto Detection,
Digit Transmission: Numeric Key, and Alt Composing.
Modified: The default Capital Lock setting of Bluetooth HID is
changed from “Auto Detection” to “Capital Lock Off”.
New: Firmware version V4.20
2.00 Dec. 30, 2005 New: Bluetooth HID supported
New: Firmware version V4.10
1.00 Oct. 31, 2005 First release
RELEASE NOTES
CONTENTS
RELEASE NOTES .................................................................................................................................. 3
OVERVIEW............................................................................................................................................ 1
Enter Configuration Mode................................................................................................................. 1
Exit Configuration Mode.................................................................................................................... 1
Update Settings............................................................................................................................ 1
Exit without Changes.................................................................................................................... 1
Restore Defaults................................................................................................................................ 1
List Current Settings.......................................................................................................................... 2
BLUETOOTH SETTINGS (1166/1266)................................................................................................. 3
1.1 RF Auto Shutdown (Suspend mode) ......................................................................................... 3
1.2 Power Saving (Sniff Mode)......................................................................................................... 3
1.3 Transmit Buffer Setting .............................................................................................................. 3
1.4 Memory Mode............................................................................................................................. 3
1.4.1 Memory Mode .................................................................................................................... 3
1.4.2 Send Data........................................................................................................................... 4
1.4.3 Clear Data........................................................................................................................... 4
1.4.4 Memory Data Delay............................................................................................................ 4
1.5 Set Connection with 3666 ......................................................................................................... 5
1.6 Set Connection with 3667 or Generic Dongle .......................................................................... 5
1.6.1 Bluetooth Serial Port Parameters ..................................................................................... 5
1.6.2 Bluetooth HID Parameters................................................................................................. 6
READER SETTINGS .............................................................................................................................. 9
2.1 Good Read Notification .............................................................................................................. 9
2.1.1 Buzzer Setting .................................................................................................................... 9
2.1.2 Buzzer Frequency............................................................................................................... 9
2.2 Read Redundancy ...................................................................................................................... 9
2.3 Scan Mode .................................................................................................................................. 9
2.4 Auto-Sense Mode (1100 only) .................................................................................................10
2.5 Scanner Time-Out ..................................................................................................................... 10
2.6 Delay between Re-read ............................................................................................................10
2.7 Negative Barcode Setting ........................................................................................................11
OUTPUT INTERFACES.........................................................................................................................13
3.1 Keyboard Wedge Parameters..................................................................................................13
3.1.1 Activate and Select Keyboard Type.................................................................................13
3.1.2 Alphabets Layout..............................................................................................................14
3.1.3 Digits Layout.....................................................................................................................14
3.1.4 Capital Lock Type .............................................................................................................14
3.1.5 Capital Lock Setting .........................................................................................................14
3.1.6 Alphabets Transmission ..................................................................................................15
Scanner Configuration SmartScan Manual
3.1.7 Digits Transmission..........................................................................................................15
3.1.8 ALT Composing.................................................................................................................15
3.1.9 Inter-Character Delay .......................................................................................................15
3.1.10 Laptop Support ..............................................................................................................15
3.2 RS-232 Parameters..................................................................................................................16
3.2.1 Activate RS-232 Interface ...............................................................................................16
3.2.2 Baud Rate......................................................................................................................... 16
3.2.3 Parity .................................................................................................................................16
3.2.4 Data Bits ...........................................................................................................................17
3.2.5 Flow Control......................................................................................................................17
3.2.6 Inter-Character Delay .......................................................................................................17
3.3 WAND Emulation Parameters (1090+/1100/1105/1200) .................................................18
3.3.1 Activate Wand Emulation.................................................................................................18
3.3.2 Normal State ....................................................................................................................18
3.3.3 Bar State...........................................................................................................................18
3.3.4 Module Time.....................................................................................................................18
3.3.5 Margin Time......................................................................................................................19
SYMBOLOGY SETTINGS.....................................................................................................................21
4.1 Select Readable Barcodes.......................................................................................................21
4.2 Codabar Parameters ................................................................................................................25
4.3 Code 25 Parameters ................................................................................................................26
4.3.1 Industrial 25 ..................................................................................................................... 26
4.3.2 Interleaved 25 .................................................................................................................. 27
4.3.3 Matrix 25 ..........................................................................................................................28
4.4 Code 39 Parameters ................................................................................................................30
4.5 Code 93 Parameters ................................................................................................................30
4.6 Code 128 Parameters..............................................................................................................30
4.7 EAN-8 Parameters ....................................................................................................................31
4.8 EAN-13 Parameters..................................................................................................................32
4.9 EAN-128 Parameters................................................................................................................33
4.10 MSI Parameters...................................................................................................................... 34
4.11 Pharmacode Parameters.......................................................................................................36
4.11.1 French Pharmacode ......................................................................................................36
4.11.2 Italian Pharmacode .......................................................................................................36
4.12 Plessey Parameters ...............................................................................................................37
4.13 RSS Family Parameters .........................................................................................................38
4.13.1 RSS-14............................................................................................................................38
4.13.2 RSS Limited....................................................................................................................38
4.13.3 RSS Expanded................................................................................................................39
4.14 Telepen Parameters...............................................................................................................40
4.15 UPC-A Parameters ..................................................................................................................41
4.16 UPC-E Parameters .................................................................................................................. 42
DATA OUTPUT FORMAT......................................................................................................................43
5.1 Character Substitution .............................................................................................................43
5.2 Prefix/Suffix Setting..................................................................................................................43
Scanner Configuration SmartScan Manual
5.3 Code ID Setting .........................................................................................................................43
5.3.1 Clear Code ID Settings.....................................................................................................43
5.3.2 Select Pre-defined Code ID..............................................................................................44
5.3.3 Change Code ID................................................................................................................44
5.4 Length Code Setting .................................................................................................................45
DATA EDITING ....................................................................................................................................49
6.1 Format Selection ......................................................................................................................49
6.1.1 Activate Editing Formats..................................................................................................49
6.1.2 Exclusive Data Editing......................................................................................................49
6.2 Editing Format Parameters ......................................................................................................50
6.2.1 Select Format to Configure..............................................................................................50
6.2.2 Restore Default Format ...................................................................................................50
6.2.3 Define Data Criteria .........................................................................................................50
6.2.4 Divide Data into Fields.....................................................................................................52
6.2.5 Additional Fields...............................................................................................................55
6.2.6 Field Transmission Sequence .........................................................................................56
NUMERAL SYSTEMS..........................................................................................................................57
Decimal System...............................................................................................................................57
Hexadecimal System.......................................................................................................................58
KEYBOARD WEDGE TABLE & ASCII TABLE........................................................................................ 59
Keyboard Wedge Table ...................................................................................................................59
Key Type......................................................................................................................................59
Key Status ..................................................................................................................................60
ASCII Table.......................................................................................................................................60
HOST SERIAL COMMANDS ................................................................................................................61
Serial Commands............................................................................................................................61
Example ...........................................................................................................................................61
UPGRADING FIRMWARE....................................................................................................................63
How to Upgrade 1166/1266 Firmware.........................................................................................63
Using 3666................................................................................................................................. 63
Using 3667 or Generic Dongle..................................................................................................64
How to Upgrade 3666 Firmware ....................................................................................................65
Find out Firmware Version of 3666 ..........................................................................................65
1
Update
ENTER CONFIGURATION MODE
Serial Command
N/A
Enter Setup
EXIT CONFIGURATION MODE
UPDATE SETTINGS
Serial Command
9999
Update
EXIT WITHOUT CHANGES
Serial Command
9998
Abort
RESTORE DEFAULTS
Serial Command
9993
Restore Defaults
Note: The default value (if there is) for each setting is included in a pair of angle brackets “<>”.
OVERVIEW
2
Enter Setup
Scanner Configuration SmartScan Manual
LIST CURRENT SETTINGS
Serial Command
9950
List settings regarding Interface, Buzzer, and
Scanner Parameters
Page 1
Serial Command
9951
List settings regarding Prefix, Postfix, and
Length Code Setting
Page 2
Serial Command
9952
List settings regarding Code ID
Page 3
Serial Command
9953
List settings regarding: Readable Symbologies
Page 4
Serial Command
9954
List settings regarding Symbology Parameters
(1/3)
Page 5
Serial Command
9955
List settings regarding Symbology Parameters
(2/3)
Page 6
Serial Command
9956
List settings regarding Symbology Parameters
(3/3)
Page 7
Serial Command
9957
List settings regarding Editing Format 1
Page 8
Serial Command
9958
List settings regarding Editing Format 2
Page 9
Serial Command
9959
List settings regarding Editing Format 3
Page 10
3
Update
1.1 RF AUTO SHUTDOWN (SUSPEND MODE)
1) Read this label to specify the time interval before the scanner enters suspend mode.
2) Read the “Decimal Value” label on page 57. For example, read “1” and “5” for the scanner to
suspend the connection with 3666 after being idle for 15 minutes.
3) Read the “Validate” label on the same page to complete this setting.
Serial Command
0445
RF Auto Shutdo
w
n
after … minutes
1.2 POWER SAVING (SNIFF MODE)
Serial Command
0458
Serial Command
0459
<Enable> Disable
1.3 TRANSMIT BUFFER SETTING
Serial Command
0386
S
erial Command
0387
Enable <Disable>
1.4 MEMORY MODE
1.4.1 MEMORY MODE
Serial Command
0321
Serial Command
0320
Enable <Disable>
Chapter 1
BLUETOOTH SETTINGS (1166/1266)
4
Enter Setup
Scanner Configuration SmartScan Manual
1.4.2 SEND DATA
Serial Command
9918
Send Data
1.4.3 CLEAR DATA
1) Read the “Clear Data” label to clear the flash memory.
2) Read the “Confirm” label to confirm the action.
Serial Command
9916
Serial Command
9917
Clear Data Confirm
1.4.4 MEMORY DATA DELAY
Serial Command
0322
Serial Command
0323
<None> 250 ms
Serial Command
0324
Serial Command
0325
500 ms 1 sec
Serial Command
0326
Serial Command
0327
2 sec 3 sec
Serial Command
0328
Serial Command
0329
5 sec 8 sec
5
Update
Chapter 1
Bluetooth Settings (1166/1266)
1.5 SET CONNECTION WITH 3666
1) Read this label or the same one at the bottom of the 3666 cradle.
2) Read the “Serial Number” label at the bottom of the cradle within 5 seconds.
3) Proceed to select a desired output interface.
Serial Command
Set Connection
1.6 SET CONNECTION WITH 3667 OR GENERIC DONGLE
1.6.1 BLUETOOTH SERIAL PORT PARAMETERS
Serial Command
0453
Activate Bluetooth SPP
DEVICE NAME BROADCASTING
Serial Command
0450
Serial Command
0451
<Yes> No
AUTHENTICATION
Serial Command
0448
Serial Command
0449
Yes <No>
PIN CODE
1) Read this label to specify the PIN code.
2) Read the “Hexadecimal Value” label on page 58 for the desired character string (max. 6
characters are allowed).
3) Read the “Validate” label on the same page to complete this setting.
Serial Command
0452
Enter PIN Code …
6
Enter Setup
Scanner Configuration SmartScan Manual
1.6.2 BLUETOOTH HID PARAMETERS
1) Read this label to activate Bluetooth HID and select a keyboard type.
2) Read the “Decimal Value” label on page 57. Refer to the table below for the number of desired
keyboard type.
3) Read the “Validate” label on the same page to complete this setting.
Serial Command
0000
A
ctivate & Select
Keyboard Type …
NO. KEYBOARD TYPE NO.
KEYBOARD TYPE
64 PCAT (US) 70 PCAT (UK)
65 PCAT (French) 71 PCAT (Belgium)
66 PCAT (German) 72 PCAT (Spanish)
67 PCAT (Italian) 73 PCAT (Portuguese)
68 PCAT (Swedish) 74 PS55 A01-2 (Japanese)
69 PCAT (Norwegian)
RESET CONNECTION
Read this label when switching connection from one PC to another and re-connection is required.
Serial Command
9972
Reset Connection
DEVICE NAME BROADCASTING
Serial Command
0450
Serial Command
0451
<Yes> No
AUTHENTICATION
Serial Command
0448
Serial Command
0449
Yes <No>
7
Update
Chapter 1
Bluetooth Settings (1166/1266)
PIN CODE
1) Read this label to specify the PIN code.
2) Read the “Hexadecimal Value” label on page 58 for the desired character string (max. 6
characters are allowed).
3) Read the “Validate” label on the same page to complete this setting.
Serial Command
0452
Enter PIN Code …
ALPHABETS LAYOUT
Serial Command
0312
Serial Command
0313
<Default Layout> AZERTY
Serial Command
0314
QWERTZ
DIGITS LAYOUT
Serial Command
0007
Serial Command
0008
<Default Layout> Upper Row
Serial Command
0009
Lower Row
CAPITAL LOCK TYPE
Serial Command
0010
Serial Command
0011
<Default> Shift Lock
Serial Command
0012
Capital Lock
8
Enter Setup
Scanner Configuration SmartScan Manual
CAPITAL LOCK SETTING
Serial Command
0002
Serial Command
0003
Auto Detection Capital Lock ON
Serial Command
0004
<Capital Lock OFF>
ALPHABETS TRANSMISSION
Serial Command
0005
Serial Command
0006
Ignore Case <Case-Sensitive>
DIGITS TRANSMISSION
Serial Command
0013
Serial Command
0014
Numeric Key <Alphanumeric
Key>
ALT COMPOSING
Serial Command
0335
Serial Command
0334
Yes <No>
9
Update
2.1 GOOD READ NOTIFICATION
2.1.1 BUZZER SETTING
Serial Command
0318
Serial Command
0319
<Enable Buzzer> Disable Buzzer
2.1.2 BUZZER FREQUENCY
Serial Command
0046
Serial Command
0047
8 kHz <4 kHz>
Serial Command
0048
Serial Command
0049
2 kHz 1 kHz
2.2 READ REDUNDANCY
Serial Command
0201
Serial Command
0202
<No Redundancy> One Time
Serial Command
0203
Serial Command
0204
Two Times Three Times
2.3 SCAN MODE
Serial Command
0066
Serial Command
0067
<Auto Off Mode>
(Default for 1000/1090+) Continuous Mode
Chapter 2
READER SETTINGS
10
Enter Setup
Scanner Configuration SmartScan Manual
Serial Command
0068
Serial Command
0069
Auto Power Off Mode Alternate Mode
Serial Command
0070
Serial Command
0071
Momentary Mode Repeat Mode
Serial Command
0072
Serial Command
0073
<Laser Mode>
(Default for
1100/1105/1166/1200/1266)
Test Mode
2.4 AUTO-SENSE MODE (1100 ONLY)
Serial Command
0333
Serial Command
0332
Enable <Disable>
2.5 SCANNER TIME-OUT
1) Read this label to specify the time interval before the scan engine times out in Laser, Auto Off, or
AutoPowerOffmode.
2) Read the “Decimal Value” label on page 57. For example, read “1” and “0” for the scanner to
automatically shut down after being idle for 10 seconds.
3) Read the “Validate” label on the same page to complete this setting.
Serial Command
0207
Scanner Time-
O
ut
after … seconds
2.6 DELAY BETWEEN RE-READ
Serial Command
0336
Serial Command
0337
100 ms 200 ms
11
Update
Chapter 2 Reader Settings
Serial Command
0338
Serial Command
0339
<400 ms> 800 ms
Serial Command
0340
Serial Command
0341
1 sec 2 sec
Serial Command
0342
Serial Command
0343
3 sec 5 sec
2.7 NEGATIVE BARCODE SETTING
Serial Command
0199
Serial Command
0200
Enable <Disable>
12
Enter Setup
Scanner Configuration SmartScan Manual
Table of contents
Other CipherLab Scanner manuals
