CIPTA PERNIKA NUSANTARA SMART VMS User manual

SMART VMS
Operator’s Documentation
CIPTA
PERNIKA
NUSANTARA
Hardware Version
Document Version : 1.0.0
Document Realease :
1.2
2021/02/13
:

This document assumes that the Cakrawala Armada device is properly
installed and powered on.
This section assumes that the Cakrawala Armada positioning service has been
activated by the superadmin.
1. Power LED Status
2. Connectivity LED Status
3. SSAS LED Status
No
No No
No
No
Yes
Yes
Yes/No
Yes
Yes Yes
Yes
Low Battery Power Unplugged Throttled
Electrical Condition
Status
Static Green
Static Orange
Static Red
Blinking Red
LED Behavior
Colour
SSAS CONN POWER
SSAS CONN POWER
SSAS CONN POWER
SSAS CONN POWER
StatusColour
Blinking Red
Blinking Orange
Static Orange
Blinking Green
Static Green
Satellite Signal
Low
Low
Medium
Medium
High
High
Disconnected
Disconnected
Disconnected
Connected
Connected
Connected
GPS Signal
Connectivity Condition
LED Behavior
Static Red
SSAS CONN POWER
SSAS CONN POWER
SSAS CONN POWER
SSAS CONN POWER
SSAS CONN POWER
SSAS CONN POWER
StatusColour
Static Red
SSAS Button Condition
LED Behavior
SSAS CONN POWER
SSAS CONN POWER
SSAS CONN POWER
LED Off
Static Orange
No
Yes
Yes
Pushed Acknowledged
No
Yes
Customer Support
Yes/No
SMART VMS
OPERATOR’S DOCUMENTATION
Operator’s Documentation
1

This section assumes that the Cakrawala Armada positioning service has been
activated by the superadmin.
Operator’s Documentation
2
Support
Please do not hesitate to contact us either via email, or phone. For self-help,
please visit www.pernika.com support for more information.
Thank you for choosing PT. Cipta Pernika Nusantara !
[phone] [e-mail]
This section assumes that the VMS service is active. The SSAS button will not work
unless the VMS service is active. To activate the SSAS button, press the button
deeply until it locks. An activated SSAS button will make SSAS LED light up static
orange. when SSAS status is known by the authority the SSAS LED will light up
static red. To deactivate the SSAS button, press the button deeply until it unlocks.
A deactivated SSAS button will make the SSAS LED light down. The activation and
deactivation of SSAS are illustrated in Figure bellow.
4. SSAS Button Activation