Cisco PLWK400 User manual

User
Guide
Linksys PLWK400 Powerline AV Wireless Network Extender Kit

2
Contents
Linksys PLWK400
Overview . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . 3
PLE400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PLW400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
How Powerline networking works . . . . . . . . . . . 5
Example installation . . . . . . . . . . . . . . . . . . . . . . . 5
Installing the Adapters . . . . . . . . .6
Installation overview . . . . . . . . . . . . . . . . 6
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
How to share Internet access . . . . . . . . . . . . . 6
How to connect your PLE400 . . . . . . . . . . . . . 7
How to connect your PLW400 . . . . . . . . . . . . . 7
Setting up advanced security . . . . . . . . . . . . . 8
Using the Utility . . . . . . . . . . . . 8
Troubleshooting . . . . . . . . . . . 10
Specications . . . . . . . . . . . . 12
Contents

3
Overview
Linksys PLWK400
Thank you for choosing this Linksys Powerline network adapter kit. These
adapters provide easy setup and let you connect wired and wireless network
devices to your home network. You need at least two Powerline adapters to
create a Powerline network. This kit includes:
•One PLE400 single-port Powerline adapter
•One PLW400 wireless single-port Powerline adapter
Connect the PLE400 to your network router, and connect the PLW400 to any
wireless or wired network device in any room of the house. You can find more
help from our award-winning, 24/7 customer support at Linksys.com/support.
Features
PLE400
Powerline—The Powerline LED turns on when the adapter is
connected to the Powerline network. The LED flashes to indicate
network activity.
Ethernet—The Ethernet LED turns on when a wired network device
is turned on and connected to the adapter’s Ethernet (network) port.
The LED flashes to indicate network activity.
Power—The power LED turns on when the adapter is powered on.
Ethernet—This connects to computers or other wired network
devices. In a basic home Powerline network setup, you would
connect this to one of your router’s available Ethernet ports.
HomePlug Simple Connect Button—Configures advanced security
(the network password) for your Powerline network.
Standby/Reset—To restore the factory default settings (including
the advanced security settings and the network password), use a
pointed object to press and hold the Standby/Reset button for at
least ten seconds.
Overview

4
Overview
Linksys PLWK400
PLW400 Wi-Fi Protected Setup button—Press this button to connect with
other wireless network devices that have a Wi-Fi Protected Setup
button.
HomePlug Simple Connect button—Configures advanced security
(the network password) for your Powerline network.
Reset button (recessed)—To restore the factory default settings
(including the advanced security settings and the network
password), use a pointed object to press and hold the Reset button
for at least ten seconds.
Powerline LED—The Powerline LED turns on when the adapter is
connected to the Powerline network. The LED flashes to indicate
network activity.
Ethernet LED—The Ethernet LED turns on when a wired network
device is turned on and connected to the adapter’s Ethernet
(network) port. The LED flashes to indicate network activity.
Wireless LED—The Wireless LED turns on when a wireless network
device is connected to your PLW400.
Wi-Fi Protected Setup™ LED—This LED flashes while a wireless
network device is connecting with your PLW400 using Wi-Fi
Protected Setup.
Power LED—The power LED turns on when the adapter is
connected to a powered electrical outlet.
Ethernet port—Use a network (Ethernet) cable to connect this port
to a wired network device.

5
Overview
Linksys PLWK400
How Powerline networking works
Electrical wiring runs through your home or office, carrying power to electrical
outlets in every room. The typical wired Ethernet network uses Ethernet
network cables to connect your wired network devices. A Powerline network
uses your existing household wiring as the wiring for your Powerline network.
To create your Powerline network, use two or more Powerline adapters. Each
device on your Powerline network requires a connection (either wired or
wireless) to a Powerline adapter.
•The PLE400 has one Ethernet port. One of these devices is typically used
in a Powerline network to connect your network’s wireless router to the
household wiring.
•The PLW400 contains one Ethernet port and an access point. You can
connect one wired device and several wireless devices to it.
When adding a Powerline network to an existing network, the connections
between the Internet, modem, and router stay the same.
Example installation
This diagram shows a basic Powerline network in a house. The router upstairs is
connected to the PLE400, which is plugged into an electrical outlet. Downstairs,
a gaming console and a computer are connected to the PLW400, which is
plugged into an electrical outlet.
Using the household wiring of the home, the router expands the local network
to include the gaming console and desktop computer in the living room.
Internet access, files, and printers can be shared between the computers and
other networked devices. For online gaming, you can play downstairs in the
comfort of your living room, while using the high-speed Internet connection
of the router and modem upstairs.
Modem
Router
Computer
Gaming
Console
PLE400
PLW400

6
Installing the Adapters
Linksys PLWK400
Installing the Adapters
Installation overview
To set up your Powerline network, you should:
•Make sure you already have Internet access and a working home network.
•Share Internet access with your Powerline network.
•Install Powerline adapters near the network devices that you want to
connect to your home network.
•Make sure that the wireless devices that you want to connect to the
PLW400 have a working wireless feature. An easy way to test this is to
first try to connect the wireless network device to your home’s wireless
router while near the router.
Tips
•If possible, connect Powerline adapters directly to a wall power outlet,
and not to an extension cord, power strip, or surge protector.
•If a Powerline adapter must be installed onto a power strip, make sure
that no other electronic devices are connected to the same power strip.
•If possible, position the PLW400 near the wireless devices that you want
to connect.
•Avoid obstructions (such as metal file cabinets, mirrors, and thick walls)
between the PLW400 and any wireless device you want to connect.
How to share Internet access
To share Internet access over the Powerline network, connect your router to
the Powerline network (typically with a single-port Powerline adapter such as
the PLE400).
To connect your wireless router to your Powerline network:
1. Connect your PLE400 (or another single-port Powerline adapter) to a
power outlet near your wireless router. The adapter’s power LED turns
on.
2. Use the included Ethernet network cable to the port on the adapter
and to an available port on the back of the wireless router. The adapter’s
Ethernet LED turns on. You are now ready to extend your Powerline
network to the rest of your home.
NOTE
For advanced security setup, see “Setting up advanced security” on
page 8.

7
Installing the Adapters
Linksys PLWK400
How to connect your PLE400
You can use your PLE400 to provide Internet access to the rest of your Powerline
network (see “How to share Internet access” above). Or, if you used a different
Powerline adapter to share Internet access, you can install your PLE400
elsewhere in your home.
TIP
You can also set up and configure all of your Linksys Powerline
devices using the configuration utility. For more information, see
“Using the Utility” on page 8.
To add a PLE400 to your Powerline network:
1. Connect the adapter to a power outlet near the network device you want
to connect. The adapter’s power LED turns on. The Powerline LED flashes,
and continues flashing until it connects to a second Powerline adapter.
2. Connect the network device’s network cable to an available port on the
Powerline adapter. The adapter’s Ethernet LED flashes, then stays on
when the connection is finished.
How to connect your PLW400
After your existing network’s router is connected to a Powerline adapter, you
can install your PLW400 elsewhere in your home.
TIP
You can also set up and configure all of your Linksys Powerline
devices using the configuration utility. For more information, see
“Using the Utility” on page 8.
To connect your PLW400:
1. Make sure that the power switch on the right side is set to I (on).
2. If your home network already has security set up (recommended):
a. Connect the PLW400 to a power outlet near your main wireless router.
b. On the PLW400, press and hold the Wi-Fi Protected Setup button
at least one second, until the the Wi-Fi Protected Setup LED flashes.
c. Within two minutes, press the Wi-Fi Protected Setup button on
your wireless router. The PLW400 retrieves the security settings from
the router and connects to your wireless network.

8
Using the Utility
Linksys PLWK400
3. Move your PLW400 to a power outlet near the wireless network device(s)
you want to connect. Typically, this area is not covered well by your
home’s wireless network router.
The Powerline LED flashes, then stays on when the connection to the
rest of the Powerline network is finished. Your home’s wireless network is
now available in the area surrounding the PLW400.
4. Connect the wireless network device to the wireless network in the
usual manner. For instructions, see your wireless network device’s user
documentation. The PLW400’s Wireless LED flashes, then stays on
when a wireless network device successfully connects.
Setting up advanced security
NOTE
The devices connected to the Powerline adapters will temporarily
lose Internet connection during the security setup.
To configure your network adapter with advanced security:
1. On one of the existing Powerline adapters that already have advanced
security set up, press and hold the HomePlug Simple Connect
button for at least one second, until the Powerline LED begins
flashing slowly.
2. On your PLW400, press and hold the HomePlug Simple Connect
button for at least one second, until the Powerline LED begins
flashing slowly. When the LED stops flashing, the network key has been
shared with the PLW400.
NOTE
The devices connected to the adapters will regain Internet access
within five minutes.
Using the Utility
If you’re having difficulty connecting the adapters using Wi-Fi Protected Setup,
or if you’d like to set more advanced options, you can use the configuration
utility.
To install the configuration utility:
1. Connect a computer’s Ethernet port to the PLW400’s Ethernet port using
the provided cable.
2. Insert the setup CD into the computer’s CD or DVD drive, then follow the
on-screen instructions.
To use the configuration utility:
1. After the utility is installed:
On Windows systems:
a. Click Start, All Programs, Cisco Systems, then Cisco Powerline AV
Utility. The utility opens.
On Mac OS X systems:
a. Open the Applications folder, then double-click the Cisco Powerline
AV Utility icon. The utility opens.

9
Using the Utility
Linksys PLWK400
NOTE
If you try to change the settings of a Powerline device from a
computer that is not connected directly to that device with a cable,
you are prompted for a password. The device password is printed
on the back of the device.
2. Click the Network Status tab to view details of the Powerline adapters
that are connected to your network.
•If a connected adapter is not listed here, click Refresh.
•To change information for any adapter that’s listed, select the adapter,
then click Edit.
3. Click the Security tab to manually change the network key for each
device. If you need to revert to the default key, click Restore Default Key.
4. Click the Quality of Service tab to specify how the network prioritizes
network bandwidth.
5. Click the Administrator tab to restart an adapter, restore factory defaults,
or upgrade the adapter’s firmware.

10
Troubleshooting
Linksys PLWK400
6. Click the Wireless Settings tab to change the wireless network name
(SSID), wireless security type, or passphrase/key.
Settings are applied to the adapter(s) immediately. Close the window to
exit the utility.
Troubleshooting
Your wireless network device is not recognized by your network.
Try the following:
•Make sure that the wireless device is turned on and that its wireless
networking is turned on.
•If possible, position the PLW400 near the wireless device that you want
to connect.
•Avoid obstructions (such as metal file cabinets, mirrors, and thick walls)
between the PLW400 and any wireless device you want to connect.
If you have set up advanced security for the Powerline network, check the
following:
•Make sure all adapters on the Powerline network have been configured
with the same network password. The network password must be
identical in order for them to communicate with each other. See “Setting
up advanced security” on page 8“ or “Using the Utility” on page 8.
The Ethernet LED does not turn on after you connected a wired Ethernet
device to the Powerline adapter.
Follow these instructions:
1. Make sure that the Ethernet network cable is securely connected to the
adapter.
2. Make sure that the Ethernet network cable is securely connected to the
network device you are connecting.
Or:
1. Disconnect the adapter from the power outlet.
2. Disconnect the Ethernet network cable from the adapter.
3. Wait five seconds.
4. Re-connect the Ethernet network cable to the adapter.
5. Re-connect the adapter to the power outlet.

11
Troubleshooting
Linksys PLWK400
6. If this solution does not work, make sure that the electrical outlet is
working properly. Plug a different device into the outlet, and try to turn
it on.
You cannot connect to other computers on your local network or to the
Internet.
If you did not set up advanced security for the Powerline network, follow these
instructions:
1. Locate the Powerline adapter connected to the computer that cannot
connect.
2. On the left side of the adapter, use a pointed object to press and hold the
Standby/Reset button for at least ten seconds. This resets the adapter to
its factory default settings.
If you have set up advanced security for the Powerline network, check the
following:
•Make sure all adapters on the Powerline network have been configured
with the same network password. The network password must be
identical in order for them to communicate with each other. See “Setting
up advanced security” on page 8“ or “Using the Utility” on page 8.
•If you are adding a new adapter to a pre-existing Powerline network with
a unique network password, follow the instructions in “Using the Utility”
on page 8.
The LEDs are flashing and I don’t know what it means.
Refer to the following table of LED behavior to help diagnose the problem:
Powerline LED
Off Not connected to Powerline network
Flashing fast Send/Receive data
Flashing slow Pairing
Solid Connected to Powerline network
Ethernet LED
Off Not connected to Ethernet network
Flashing Send/Receive data
Solid Connected to Ethernet network
Wireless LED
(PLW400 only)
Off Wireless not connected
Solid Wireless enabled
Flashing Send/Receive data
Wi-Fi Protected
Setup
(PLW400 only)
Flashing slow Connection in progress (up to two
minutes)
Flashing fast Connection error.
Solid Connection successful
Power LED
Off Device power off
Solid Device power on and ready
Flashing fast
momentarily
Factory default (both models), device
wakeup from standby mode (PLE400
only)
Flashing fast
indefinitely Pairing error/system error
Flashing slow Device in standby mode (PLE400 only)
WEB
If your questions are not addressed here, go to the Linksys Support
website at Linksys.com/support.

12
Specifications
Linksys PLWK400
Specifications
Model PLE400
Standards HomePlug AV, 802.3, 802.3u
Ports Fast Ethernet (10/100)
Buttons Easy Connect, Reset
LEDs Powerline, Ethernet, Power
Security Features 128-Bit AES Link Encryption
Security Key Bits 128
Modulation schemes 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO
Environmental
Dimensions 101.9 × 71.9 × 52.4 mm
(4.0 × 2.83 × 2.06 inches)
Weight 116 g (4.1 oz.)
Power 100-240V AC, 50-60 Hz
Certication FCC, IC, CE, HomePlug AV
Operating Temp. 0 to 40ºC (32ºF to 104ºF)
Storage Temp. -20 to 70ºC (-4ºF to 158ºF)
Operating Humidity 10 to 85% Non-condensing
Storage Humidity 5 to 90% Non-condensing
Model PLW400
Standards HomePlug AV, IEEE 801.11b/g/n, 802.3, 802.3u
Ports Fast Ethernet (10/100)
Buttons Wi-Fi Protected Setup, Easy Connect, Reset
LEDs Powerline, Ethernet, Wireless,
Wi-Fi Protected Setup, Power
Security Features 128-Bit AES Link Encryption, WPA2, WPA, WEP
Modulation schemes 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO
Network client support Up to 8 Powerline client devices, up to 32
wireless client devices
Utility OS requirements Windows 7/Vista/XP, Mac OS X v10.5 or higher
Default SSID “CiscoXXXXX” where XXXXX is the last 5 digits of
the adapter’s serial number
Environmental
Dimensions 113 × 73 × 33 mm (4.45 × 2.87 × 1.3 inches)
Weight 158 g (5.6 oz.)
Power 100-240V AC, 50-60 Hz
Certications FCC, IC, CE, WiFi, HomePlug AV
Operating Temp. 0 to 40ºC (32ºF to 104ºF)
Storage Temp. -20 to 70ºC (-4ºF to 158ºF)
Operating Humidity 10 to 85% Non-condensing
Storage Humidity 5 to 90% Non-condensing
NOTE
Specifications are subject to change without notice.

3425-01588 120220MS
Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and other countries.
A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. All other trademarks mentioned in this document are the property of their respective owners.
© 2012 Cisco and/or its affiliates. All rights reserved.
Visit linksys.com/support for award-winning 24/7 technical support