Cisco ASR 9000 Series User manual

Internal Ethernet Control Network Commands on
the Cisco ASR 9000 Series Router
This module provides command line interface (CLI) commands for configuring internal ethernet control on
your router.
•clear controller backplane ethernet location statistics, page 2
•show controllers backplane ethernet local brief, page 3
•show controllers backplane ethernet local clients, page 5
•show controllers backplane ethernet local detail, page 7
•show controllers backplane ethernet local multicast groups, page 9
•show controllers backplane ethernet location brief, page 11
•show controllers backplane ethernet location clients, page 14
•show controllers backplane ethernet location detail, page 16
•show controllers backplane ethernet location multicast groups, page 19
•show controllers switch ports, page 21
•show controllers switch stats, page 23
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
OL-24762-01 1

clear controller backplane ethernet location statistics
To delete the aggregate statistics of traffic sent and received over the control Ethernet, use the clear controller
backplane ethernet location statistics command in EXEC mode.
clear controller backplane ethernet location node-id statistics
Syntax Description Identifies the node whose controller information you want to delete. The node-id
argument is entered in the rack/slot/module notation.
node-id
Command Modes EXEC
Command History ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
Examples The following example shows how to clear all client statistics on the node at 0/1/1:
RP/0/RSP0/CPU0:router# clear controller backplane ethernet location 0/1/1 clients all
statistics
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
2OL-24762-01
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
clear controller backplane ethernet location statistics

show controllers backplane ethernet local brief
To display brief information about the Ethernet interface that connects the node to the router control Ethernet,
use the show controllers backplane ethernet local brief command in EXEC mode.
show controllers backplane ethernet local brief
Syntax Description This command has no keywords or arguments.
Command Modes EXEC
Command History ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
Examples The following example shows the output from the show controllers backplane ethernet local brief command:
RP/0/RSP0/CPU0:router# show controllers backplane ethernet local brief
FastEthernet0_RP1_0 (local) is up, MTU 1514 bytes
561688 packets input, 53760372 bytes
683424 packets output, 216565877 bytes
RP/0/RSP0/CPU0:router#
Table 1: show controllers backplane ethernet local brief Field Descriptions
DescriptionField
Maximum packet size, in bytes, that a particular
interface can handle.
MTU
Total number of packets received.packets input
Total number of packets transmitted.packets output
Related Commands DescriptionCommand
show controllers backplane ethernet local clients, on page 5
show controllers backplane ethernet local detail, on page 7
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
OL-24762-01 3
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
show controllers backplane ethernet local brief

DescriptionCommand
Displays all multicast addresses currently
being used by active interfaces on the router.
show controllers backplane ethernet local multicast groups, on
page 9
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
4OL-24762-01
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
show controllers backplane ethernet local brief

show controllers backplane ethernet local clients
To display information about local client applications, use the show controllers backplane ethernet local
clients command in EXEC mode.
show controllers backplane ethernet local clients {client-id statistics| all}
Syntax Description Displays a list of client statistics for the specified client ID. Range is from
1 to 22.
client-id statistics
Displays a list of all client applications and their IDs.all
Command Modes EXEC
Command History ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
Examples The following example shows the output from the show controllers backplane ethernet local clients
command, which displays a list of client statistics for client ID 1:
RP/0/RSP0/CPU0:router# show controllers backplane ethernet local clients 1 statistics
Client QNET, ES Client Id 1, PID 20498 running on FastEthernet0_33_1
490915 packets input, 41918238 bytes
490912 packets delivered,41918120 bytes
0 packets discarded (0 bytes) in garbage collection
0 (0 bytes) unicast packets filtered
0 (0 bytes) multicast packets filtered
0 (0 bytes) buffer mgmt policy discards
555660 packets output, 134265364 bytes, 0 could not be transmitted
Table 2: show controllers backplane ethernet local clients Field Descriptions
DescriptionField
Client application name and ID, followed by
backplane client application statistics.
Client
Process ID.PID
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
OL-24762-01 5
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
show controllers backplane ethernet local clients

Related Commands DescriptionCommand
Displays brief information about the Ethernet interface
that connects the node to the router control Ethernet.
show controllers backplane ethernet local brief, on
page 3
show controllers backplane ethernet local detail, on
page 7
Displays all multicast addresses currently being used
by active interfaces on the router.
show controllers backplane ethernet local multicast
groups, on page 9
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
6OL-24762-01
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
show controllers backplane ethernet local clients

show controllers backplane ethernet local detail
To display detailed information for the Ethernet interface that connects the node to the router control Ethernet,
use the show controllers backplane ethernet local detail command in EXEC mode.
show controllers backplane ethernet local detail
Syntax Description This command has no keywords or arguments.
Command Modes EXEC
Command History ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
Examples The following example shows the output from the show controllers backplane ethernet local detail command:
RP/0/RSP0/CPU0:router# show controllers backplane ethernet local detail
FastEthernet0_33_1 is up
Hardware is 10/100 Ethernet, H/W address is 5246.4800.0211
Internet address is 10.0.2.17
MTU 1514 bytes
Encapsulation HFRIES (HFR Internal Ethernet Server)
Mode : Full Duplex, Rate : 100Mb/s
787486 packets input, 64535218 bytes, 0 total input drops
0 packets discarded (0 bytes) in garbage collection
3 packets discarded (582 bytes) in recv processing
Received 8 broadcast packets, 285994 multicast packets
Input errors: 0 CRC, 0 overrun, 0 alignment, 0 length, 0 collision
682244 packets output, 157245225 bytes, 0 total output drops
Output 42649 broadcast packets, 42649 multicast packets
Output errors: 0 underruns, 0 aborts, 0 loss of carrier
Table 3: show controllers backplane ethernet local detail Field Descriptions
DescriptionField
Provides the hardware type, followed by the hardware
address.
Hardware
IP address of the interface.Internet address
Maximum packet size, in bytes, that a particular
interface can handle.
MTU
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
OL-24762-01 7
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
show controllers backplane ethernet local detail

DescriptionField
Encapsulation method assigned to the interface.Encapsulation
Indicates the operating mode of the interface, followed
by transmission data.
Mode
Related Commands DescriptionCommand
Displays brief information about the Ethernet interface
that connects the node to the router control Ethernet.
show controllers backplane ethernet local brief, on
page 3
show controllers backplane ethernet local clients, on
page 5
Displays all multicast addresses currently being used
by active interfaces on the router.
show controllers backplane ethernet local multicast
groups, on page 9
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
8OL-24762-01
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
show controllers backplane ethernet local detail

show controllers backplane ethernet local multicast groups
To display all multicast addresses currently being used by active interfaces on the router, use the show
controllers backplane ethernet local multicast groups command in EXEC mode.
show controllers backplane ethernet local multicast groups
Syntax Description This command has no keywords or arguments.
Command Modes EXEC
Command History ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
Examples The following example shows the output from the show controllers backplane ethernet local multicast
groups command:
RP/0/RSP0/CPU0:router# show controllers backplane ethernet local multicast groups
Intf Multicast Client registered for this address
Name address Id Name
------------------------------------------------------------------------------
FastEthernet0_RP1_CPU0 0100.0000.0064 2 GSP
0100.0000.0065 2 GSP
0100.0000.0066 2 GSP
0100.0000.0068 2 GSP
0100.0000.006a 2 GSP
0100.0000.006c 2 GSP
0100.0000.006e 2 GSP
0100.0000.0070 2 GSP
0100.0000.0072 2 GSP
0100.0000.2774 2 GSP
0100.0000.2775 2 GSP
0100.0000.2776 2 GSP
0100.0000.2778 2 GSP
0100.0000.277a 2 GSP
0100.0000.277c 2 GSP
0100.0000.277e 2 GSP
0100.0000.2780 2 GSP
0100.0000.2782 2 GSP
0100.0000.2784 2 GSP
0100.0000.2786 2 GSP
--More--
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
OL-24762-01 9
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
show controllers backplane ethernet local multicast groups

Table 4: show controllers backplane ethernet local multicast groups Field Descriptions
DescriptionField
Identifies the interface whose multicast addresses are
displayed.
A multicast address is a single address that
refers to multiple network devices.
Note
Intf Name
Multicast addresses associated with the specified
interface.
A multicast address is a single address that
refers to multiple network devices.
Note
Multicast address
Client identifier.ID
Client application name.Name
Related Commands DescriptionCommand
Displays brief information about the Ethernet
interface that connects the node to the router
control Ethernet.
show controllers backplane ethernet local brief, on page 3
show controllers backplane ethernet local clients, on page
5
show controllers backplane ethernet local detail, on page
7
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
10 OL-24762-01
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
show controllers backplane ethernet local multicast groups