Cisco Catalyst IR1800 Rugged Series Manual

Cisco Catalyst IR1800 Rugged Series Router Hardware Installation
Guide
First Published: 2021-02-03
Last Modified: 2022-03-21
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: [phone]
800 553-NETS (6387)
Fax: [phone]

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a
partnership relationship between Cisco and any other company. (1721R)
©2021–2022 Cisco Systems, Inc. All rights reserved.

CONTENTS
Preface 1
CHAPTER 1
Preface 1
Objective 1
Audience 1
Conventions 2
Safety Warnings 2
Related Documentation 8
Searching Cisco Documents 9
Product Overview 11
CHAPTER 2
Overview of Features 11
Cisco IR1800 Series Platform Features 12
Cisco IR1821 Router 12
Cisco IR1831 Router 13
Cisco IR1833 Router 13
Cisco IR1835 Router 13
Front Panel Overview 13
Rear Panel Overview 14
Pluggable Modules 15
Cellular Pluggable Interface Module (PIM) 15
SSD Module 15
GPS Module 15
SFP Modules 15
Wireless Interface Module (WIM) 17
Gigabit Ethernet Combo Port 17
Gigabit Ethernet Copper Ports 17
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
iii

Power over Ethernet 17
Front Panel LEDs 17
Reset Button 19
Supported Cisco Antennas and Antenna Accessories 19
Modem Support 19
Power Supply 21
Serial Ports 21
USB Ports 22
Installing the Router 23
CHAPTER 3
Overview 23
Safety Information 23
Equipment, Tools, and Connections 24
Items Shipped with Your Router 24
Additional Items 24
Installing the Router 25
Mounting on a Wall, Table, or Other Flat Surface 25
Installing a DIN Rail 27
Mounting the DIN Rail Bracket on the Router (Horizontal) 28
Attaching the Bracket to the DIN Rail 28
Changing the Bracket Orientation 30
Bracket Disassembly 31
Bracket Reassembly 33
Mounting the DIN Rail Bracket on the Router (Vertical) 34
Installing the Router Ground Connection 35
Antenna Selection and Installation 37
CHAPTER 4
Introduction to Selecting Antennas 37
Antenna Installation Best Practices 37
Supported Antennas for the IR1800 Series Router 39
Pluggable Interface Modules 40
Wi Fi Modules 40
Indoor Antennas 40
Outdoor Antennas 41
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
iv
Contents

Outdoor and Transportation Antennas 42
Supported Extension Bases and Cables 42
Pluggable Interface Modules 43
CHAPTER 5
Introduction to Installing Pluggable Interface Modules 43
Installing a PIM 44
5G Sub-6 GHz Pluggable Interface Module 49
CHAPTER 6
5G Sub-6 GHz Support on IoT Routing 49
5G Pluggable Interface Module Overview 50
LED Behaviors 51
RF Band and Port Mapping for the P-5GS6-GL Antenna 52
Thermal Mitigation 53
Attaching an Antenna 55
Cisco Wi-Fi Interface Module (WIM) 57
CHAPTER 7
Overview 57
Installation 59
Transmit Power and Receive Sensitivity 61
Thermal Mitigation 64
SSD Module 65
CHAPTER 8
Introduction to the Solid State Drive in the IR1800 Series 65
Installing an SSD Module 66
GPS Field Replaceable Unit Module 69
CHAPTER 9
Overview of the GPS FRU Module 69
Installation and Removal of a GPS FRU Module 70
Digital I/O, Ignition, and CAN Bus Connectivity 73
CHAPTER 10
Overview of the Digital I/O, Ignition, and CAN Bus Connectivity 73
Digital I/O Features 73
The Digital I/O Connector 73
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
v
Contents

Digital I/O Specifications 75
Controller Area Network Bus Features 75
Can Bus Power Connector 76
On-Board Diagnostic (OBD-II) 76
Connecting the Router 79
CHAPTER 11
Overview of the IR1800 Connecting Process 79
Preparing to Connect the Router 79
Preventing Damage to the Router 79
Connecting a PC, Server, or Workstation 80
Connecting a PC to the Console Port 80
Connecting to DC Power and CAN Bus Wiring 81
Plugs and Pinouts 81
Verifying Connections 82
Installing the IP54 Kit 83
CHAPTER 12
Overview of the IP54 Kit 83
Installing the IP54 Kit 85
Installing the Front Cover 85
Installing the Back Cover 87
Technical Specifications 89
CHAPTER 13
Overview of Technical Specifications for IR1800 Series Routers 89
Router Specifications 89
Regulatory Compliance 91
CHAPTER 14
Related Documentation 91
Installation Warning and Caution Statements 92
Hazardous Locations Standards and Marking Strings 93
EMC Information 94
Class A Notice for FCC 94
Industry Canada 94
Canadian Compliance Statement 94
European Community, Switzerland, Norway, Iceland, and Liechtenstein 95
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
vi
Contents

Declaration of Conformity with Regard to R-ED Directive 2014/53/EU 95
Declaration of Conformity for RF Exposure 96
RF Exposure 96
This Device Meets International Guidelines for Exposure to Radio Waves 96
This Device Meets FCC Guidelines for Exposure to Radio Waves 97
FCC Radiation Exposure Statement 97
This Device Meets the Industry Canada Guidelines for Exposure to Radio Waves 98
ISED Radiation Exposure Statement 98
Additional Information on RF Exposure 98
EMC Class A Notices and Warnings 99
Declaration of Conformity with Regard to EU Directive 2014/53/EU 99
National Restrictions 101
Denmark 101
Italy 101
Latvia 102
Taiwan 102
Statement 191—Voluntary Control Council for Interference (VCCI) Class A Warning for Japan 102
ステートメント 191—日本向けVCCI クラス Aに関する警告 102
Statement 1008—Class 1 Laser Product 103
ステートメント 1008—クラス 1レーザー製品 103
Statement 1051—Laser Radiation 103
ステートメント 1051：レーザー放射 103
Statement 1255—Laser Compliance Statement 103
聲明4011—國家通信委員會警告 104
Intended Use of equipment 104
Changing Output Power 104
Obtaining Documents from Cisco.com 104
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
vii
Contents

Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
viii
Contents

CHAPTER 1
Preface
This preface contains the following sections:
•Preface, on page 1
•Objective, on page 1
•Audience, on page 1
•Conventions, on page 2
•Safety Warnings, on page 2
•Related Documentation, on page 8
•Searching Cisco Documents, on page 9
Preface
This preface describes the objectives, audience, organization, and conventions of this guide and describes
related documents that have additional information.
The documentation set for this product strives to use bias-free language. For purposes of this documentation
set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial
identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be
present in the documentation due to language that is hardcoded in the user interfaces of the product software,
language used based on RFP documentation, or language that is used by a referenced third-party product.
Note
Objective
This guide provides an overview of and explains how to install and connect your Cisco IR1100 Router.
Audience
This guide is intended for people who have a high level of technical ability, although they may not have
experience with Cisco software.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
1

Conventions
This section describes the conventions used in this guide.
Means reader take note. Notes contain helpful suggestions or references to additional information and material.
Note
This symbol means reader be careful. In this situation, you might do something that could result in equipment
damage or loss of data.
Caution
Means the following information will help you solve a problem . The tip information might not be
troubleshooting or even an action, but could be useful information.
Tip
Means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be
aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing
accidents. Use the statement number provided at the end of each warning to locate its translation in the
translated safety warnings that accompanied this device.
Warning
Safety Warnings
If this product will be installed in a hazardous location, read the compliance information shipped with the
device.
Caution
This product is a class A device for FCC compliance. Any mention of a class B compliance rating does not
indicate this product meets those guidelines.
Attention
This warning symbol means danger. You are in a situation that
could cause bodily injury. Before you work on any equipment,
be aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents. Use the
statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied
this device. Statement 1071
Warning
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
2
Preface
Conventions