Cisco Linksys SFE1000P User manual

¸
SFE1000P 8-port 10/100 Ethernet Switch with PoE
Reference Guide
SFE1000P 8-PORT 10/100 ETHERNET SWITCH WITH POE REFERENCE GUIDE
SFE1000P 8-port 10/100 Ethernet Switch with
PoE Reference Guide
March 2008

© Copyright 2008, Cisco Systems, Inc.
Specifications are subject to change without notice.
Linksys, the Cisco Systems logo, the Linksys Logo, and the Linksys One logo are registered trademarks of Cisco
Systems, Inc. All other trademarks mentioned in this document are the property of their respective owners.
Document Revision History
Revision Date Description
1.0 March 2008 Initial release

1
SFE1000P Gigabit Ethernet Switch Reference Guide
Contents
Chapter 1: Preface . . . . . . . . . . . . . . . . . . . . 1
Audience 1
Purpose 1
Organization 1
Chapter 2: Getting Started . . . . . . . . . . . . . . . . . 3
Starting the Application 3
Understanding the Interface 4
Device Representation 6
Using the Linksys Management Buttons 6
Using Screen and Table Options 7
Adding Device Information 7
Modifying Device Information 7
Deleting Device Information 7
Resetting the Device 8
Logging Off The Device 8
Chapter 3: Managing Device Information . . . . . . . . . . . 9
Understanding the Device Zoom View 9
Defining General System Information 10
Resetting the Device 11
Chapter 4: Managing Power-over-Ethernet Devices . . . . . . . . 12
PoE Settings 13
Edit PoE 14
Chapter 5: Configuring Device Security . . . . . . . . . . . . 16
Passwords Management 16
Add Local User 17
Modifying the Local User Settings 17
Defining Authentication 18
Defining Authentication Profiles 18
Add Authentication Profile 19
Modify the Authentication Profile 20
Mapping Authentication Profiles 21
Defining TACACS+ 22
Add TACACS+ Server 24
Modifying TACACS+ Settings 25
Defining RADIUS 26
Add RADIUS Server 27
Modifying RADIUS Server Settings 29
Defining Access Method 30
Defining Access Profiles 30
Add Access Profile Page 31
Defining Profile Rules 33

2
SFE1000P Gigabit Ethernet Switch Reference Guide
Contents
Add Profile Rule 35
Modifying Profile Rules 36
Defining Traffic Control 38
Defining Storm Control 38
Modifying Storm Control 39
Defining Port Security 40
Modifying Port Security 42
Defining 802.1x 44
Defining 802.1X Properties 44
Defining Port Authentication 46
Modifying 8021X Security 48
Defining Multiple Hosts 50
Modifying Multiple Host Settings 51
Defining Authenticated Host 52
Defining Access Control 53
Defining MAC Based ACL 53
Adding an ACL 55
Adding Rule to MAC Based ACL 56
Defining IP Based ACL 58
Add IP Based ACL 61
Adding an IP Based Rule 63
Defining ACL Binding 65
Modifying ACL Binding 66
Defining DoS Prevention 67
Global Settings 67
Defining Martian Addresses 68
Add Martian Address Page 69
Chapter 6: Configuring Device Interfaces . . . . . . . . . . . . 70
Defining Port Settings 70
Modifying Port Settings 72
Defining LAG Management 75
Modifying LAG Membership 77
Defining LAG Settings 78
LAG Configuration Settings 79
Configuring LACP 81
Modify LACP Parameter Settings 82
Chapter 7: Configuring VLANs . . . . . . . . . . . . . . . 83
Defining VLAN Properties 84
Add VLAN 85
Modifying VLANs 85
Defining VLAN Membership 86
Modifying VLAN Membership 87
Defining Interface Settings 88
Modifying VLAN Interface Settings 89

3
SFE1000P Gigabit Ethernet Switch Reference Guide
Contents
Configuring GVRP Settings 90
Modifying GVRP Settings 91
Defining VLAN Protocol Group 92
Add Protocol Group 93
Modifying Protocol Groups 93
Defining VLAN Protocol Port 94
Add Protocol Port to VLAN 94
Chapter 8: Configuring IP Information . . . . . . . . . . . . 96
Domain Name System 96
Defining DNS Server 96
Add DNS Server 98
Mapping DNS Hosts 98
Add DNS Host 99
Configuring Layer 2 IP Addresses 100
Defining IP Interfaces 100
Enabling ARP 101
Add ARP 102
Modifying ARP Settings 103
Chapter 9: Defining Address Tables . . . . . . . . . . . . 104
Defining Static Addresses 104
Add Static MAC Address 105
Defining Dynamic Addresses 106
Chapter 10: Configuring Multicast Forwarding . . . . . . . . 108
IGMP Snooping 108
Modifying IGMP Snooping 109
Defining Multicast Bridging Groups 110
Add Multicast Group 111
Modifying a Multicast Group 112
Defining Multicast Forwarding 113
Modifying Multicast Forwarding 114
Chapter 11: Configuring Spanning Tree . . . . . . . . . . . 115
Defining STP Properties 116
Global Settings 116
Defining Interface Settings 118
Modifying Interface Settings 120
Defining Rapid Spanning Tree 122
Modifying RTSP 124
Defining Multiple Spanning Tree 126
Defining MSTP Properties 126
Mapping MSTP Instances to VLAN 127
Defining MSTP Instance Settings 128
Defining MSTP Interface Settings 129

4
SFE1000P Gigabit Ethernet Switch Reference Guide
Contents
Interface Table 131
Chapter 12: Configuring SNMP . . . . . . . . . . . . . . 134
Configuring SNMP Security 135
Defining the SNMP Engine ID 135
Defining SNMP Views 136
Add SNMP View 137
Defining SNMP Users 138
Add SNMP Group Membership 139
Modifying SNMP Users 140
Define SNMP Groups 141
Adding SNMP Group Profiles 142
Modifying SNMP Group Profile Settings 143
Defining SNMP Communities 144
Adding SNMP Communities 145
Modifying SNMP Community Settings 146
Defining Trap Management 147
Defining Trap Settings 147
Configuring Station Management 148
Adding a SNMP Notification Recipient 150
Modifying SNMP Notifications Settings 152
Defining SNMP Filter Settings 154
Add SNMP Notification Filter 155
Chapter 13: Configuring Quality of Service . . . . . . . . . . 156
Defining General Settings 157
Defining CoS 157
Modifying Interface Priorities 158
Defining Queue 159
Mapping CoS to Queue 160
Mapping DSCP to Queue 161
Configuring Bandwidth 162
Modifying Bandwidth Settings 163
Defining Advanced Mode 164
Configuring DSCP Mapping 165
Defining Class Mapping 166
Adding QoS Class Maps 167
Defining Aggregate Policer 168
Adding QoS Aggregate Policer 169
Modifying QoS Aggregate Policer 170
Configuring Policy Table 171
Adding QoS Policy Profile 171
Modifying the QoS Policy Profile 173
Defining Policy Binding 174
Adding QoS Policy Binding 175
Modifying QoS Policy Binding Settings 175

5
SFE1000P Gigabit Ethernet Switch Reference Guide
Contents
Defining QoS Basic Mode 176
Rewritting DSCP Values 177
Chapter 14: Managing System Files . . . . . . . . . . . . 178
File Management Overview 178
File Management 179
Firmware Upgrade 179
Save Configuration 180
Copy Files 181
Active Image 182
Chapter 15: Managing System Logs . . . . . . . . . . . . 183
Enabling System Logs 183
Viewing the Device Memory Logs 185
Clearing Message Logs 185
Viewing the Flash Logs 186
Clearing Message Logs 186
Viewing Remote Logs 187
Adding a System Log Server 188
Modify Syslog Server Settings 190
Chapter 16: Configuring System Time . . . . . . . . . . . . 192
Defining System Time 192
Defining SNTP Settings 195
Add SNTP Server 196
Defining SNTP Authentication 197
Add SNTP Authentication 198
Chapter 17: Viewing Statistics . . . . . . . . . . . . . . 199
Viewing Ethernet Statistics 199
Defining Ethernet Interface 199
Resetting Interface Statistics Counters 200
Viewing Etherlike Statistics 201
Resetting Etherlike Statistics Counters 202
Viewing GVRP Statistics 203
Resetting GVRP Statistics Counters 204
Viewing EAP Statistics 205
Managing RMON Statistics 207
Viewing RMON Statistics 207
Resetting RMON Statistics Counters 208
Configuring RMON History 209
Defining RMON History Control 209
Add RMON History 210
Modify History Control Settings 211
Viewing the RMON History Table 212
Configuring RMON Events 214

6
SFE1000P Gigabit Ethernet Switch Reference Guide
Contents
Defining RMON Events Control 214
Add RMON Events 215
Modify Event Control Settings 216
Viewing the RMON Events Logs 217
Defining RMON Alarms 218
Add RMON Alarm 220
Modify RMON Alarm Settings 222
Chapter 18: Managing Device Diagnostics . . . . . . . . . . 224
Viewing Integrated Cable Tests 224
Performing Optical Tests 225
Configuring Port Mirroring 226
Adding Port Mirroring Session 227
Modifying Port Mirroring 227
Defining CPU Utilization 228

1
Chapter 1: Preface
Audience
SFE1000P 8-port 10/100 Ethernet Switch with PoE Reference Guide
Chapter
1
Preface
Audience
This publication is designed for people who have some experience installing networking equipment
such as routers, hubs, servers, and switches. We assume the person installing and troubleshooting
the SFE1000P is familiar with electronic circuitry and wiring practices and has experience as an
electronic or electromechanical technician.
Purpose
This guide documents the features of the Linksys Business Series SFE1000P Gigabit Ethernet Switch
(SFE1000P). It describes the selections available on the administration screens of the SFE1000P, and
provides configuration information.
Organization
This guide is organized into the following chapters:
• Chapter 2, "Getting Started,"is an introduction to the user interface.
• Chapter 3, "Managing Device Information,"defines both basic and advanced system
information.
• Chapter 4, "Managing Power-over-Ethernet Devices,"describes configuring PoE settings.
• Chapter 5, "Configuring Device Security,"describes password management, defining
authentication, access method, traffic control, 802.1x protocols, access control, and Denial
of service prevention.
• Chapter 6, "Configuring Device Interfaces,"describes defining port settings, LAG
management, LAG settings, and configuring LACP.
• Chapter 7, "Configuring VLANs," defines VLAN properties, VLAN memberships, interface
settings, and GVRP settings.
• Chapter 8, "Configuring IP Information," provides information for defining device IP
addresses.
• Chapter 9, "Defining Address Tables," contains information for defining both static and
dynamic Forwarding Database entries.
• Chapter 10, "Configuring Multicast Forwarding," contains information on configuring
IGMP snooping, defining multicast bridging groups, and multicast forwarding.
• Chapter 11, "Configuring Spanning Tree," contains information on configuring Spanning
Tree Protocol with classic STP, Rapid STP, and Multiple STP.
• Chapter 12, "Configuring SNMP," describes SNMP security and define trap management.

2
Chapter 1: Preface
Organization
SFE1000P 8-port 10/100 Ethernet Switch with PoE Reference Guide
Chapter
1
• Chapter 13, "Configuring Quality of Service," shows how to define Quality of Service
general settings, advanced mode settings, and basic mode settings. It also describes
configuring policy tables.
• Chapter 14, "Managing System Files," describes working with file management, logs, and
diagnostics.
• Chapter 15, "Managing System Logs," shows how to enable system logs, view device
memory logs, flash logs, and remote logs.
• Chapter 16, "Configuring System Time," provides information for configuring the system
time, and includes defining system time, SNTP settings, and SNTP authentication.
• Chapter 17, "Viewing Statistics," describes viewing and managing device statistics for
RMON, interfaces, GVRP, EAP, and Etherlike statistics.
• Chapter 18, "Managing Device Diagnostics," contains information for configuring port
mirroring, running cable tests, and viewing device operational information.