Cisco Catalyst 9200 Series Manual

Cisco Catalyst 9200 Series Switches Hardware Installation Guide
First Published: 2018-11-19
Last Modified: 2022-07-19
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: [phone]
800 553-NETS (6387)
Fax: [phone]

©2018–2022 Cisco Systems, Inc. All rights reserved.

CONTENTS
Product Overview 1
CHAPTER 1
Switch Models 1
Front Panel Components 3
10/100/1000 Ports 4
PoE and PoE+ Ports 4
Multigigabit Ethernet Ports 5
Management Ports 5
USB Type A Port 6
SD Card Slot 6
Uplink Ports 7
Internal Power Supply 9
Rear Panel 9
RFID Tag 10
StackWise Ports 10
Auxiliary Power Adapter 11
Power Supply Modules 11
Fan Modules 13
Ethernet Management Port 14
RJ-45 Console Port 14
Network Configurations 15
Preparing for Installation 17
CHAPTER 2
Safety Warnings 17
Installation Guidelines 19
Site Requirements 20
Temperature 21
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
iii

Air Flow 21
Humidity 22
Altitude 22
Dust and Particles 23
Air Quality 23
Corrosion 23
EMI and Radio Frequency Interference 24
Shock and Vibration 25
Power Source Interruptions 25
System Grounding 26
Maintaining Safety with Electricity 28
Preventing ESD Damage 29
Tools and Equipment 29
Verifying Switch Operation 30
Installing the Switch 31
CHAPTER 3
Shipping Box Contents 31
Planning a Switch Data Stack 32
Switch Stacking Guidelines 32
Data Stack Cabling Configurations 34
Data Stack Bandwidth and Partitioning Examples 35
Power-On Sequence for Switch Stacks 37
Mounting the Switch 38
Rack-Mounting 38
Attaching the Rack-Mount Brackets 40
Mounting the Switch in a Rack 41
Installing the Switch on a Table or Shelf 42
After Switch Installation 43
Connecting to the StackWise Ports 43
Connecting Devices to the Ethernet Ports 46
10/100/1000/Multigigabit Ethernet Port Connections 46
Auto-MDIX Connections 46
PoE and POE+ Port Connections 46
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
iv
Contents

Installing a Compact Switch 49
CHAPTER 4
Shipping Box Contents 49
Mounting the Switch 51
Mounting on a Desk or Shelf Without Mounting Screws 51
Mounting using the Mounting Tray and Screws 52
Mounting using the Mounting Tray and Magnet 55
Mounting Under a Desk or a Shelf 58
Mounting the Switch Using Rack Mount Brackets 62
Mounting the Switch on a DIN Rail 63
Connecting the System Ground 65
Attaching the Adapter Bracket to the Switch (Optional) 66
Installing the Power Cord Retainer (Optional) 69
Installing the Cable Guard (Optional) 71
Installing an SFP or SFP+ Module 73
10/100/1000 PoE and PoE+Port Connections 74
10/100/1000/Multigigabit Ethernet Port Connections 75
Auto-MDIX Connections 76
Installing a Network Module 77
CHAPTER 5
Installing a Network Module in the Switch 77
Safety Warnings 77
Installing a Network Module 78
Removing a Network Module 81
Finding the Network Module Serial Number 82
Installing and Removing Pluggable Transceiver Modules 83
Installing a Cisco Pluggable Transceiver Module 83
Removing a Cisco Pluggable Transceiver Module 85
Installing a Power Supply Unit 87
CHAPTER 6
Power Supply Modules Overview 87
Finding the Power Supply Module Serial Number 90
Installation Guidelines 91
Installing or Replacing an AC Power Supply Module 92
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
v
Contents

Installing a Fan Module 95
CHAPTER 7
Fan Modules Overview 95
Installation Guidelines 96
Installing a Fan Module 97
Finding the Fan Module Serial Number 97
Configuring the Switch 99
CHAPTER 8
Configuring the Switch Using the Web User Interface 99
Configuring the Switch Using the CLI 99
Accessing the CLI Through the Console Port 99
Connecting the RJ45 Console Port 99
Connecting the USB Console Port 100
Installing the Microsoft Windows USB Device Driver 101
Installing the Cisco Microsoft Windows USB Driver 101
Installing the Silicon Labs Windows USB Device Driver 102
Uninstalling the Cisco Microsoft Windows USB Driver 102
Uninstalling the Cisco Microsoft Windows USB Driver 102
Technical Specifications 103
APPENDIX A
Environmental and Physical Specifications 103
Specifications for the Power Supplies and Fans 107
Switch LEDs 109
APPENDIX B
LEDs 109
Console LED 110
System LED 110
ACTIVE LED 110
STACK LED 111
PoE LED 112
Port LEDs and Modes 112
Beacon LED 115
RJ-45 Console Port LED 115
Fan LED 116
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
vi
Contents

Uplink Port LEDs 116
Introduction ?
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
vii
Contents

Cisco Catalyst 9200 Series Switches Hardware Installation Guide
viii
Contents

CHAPTER 1
Product Overview
•Switch Models, on page 1
•Front Panel Components, on page 3
•Rear Panel, on page 9
•Network Configurations, on page 15
Switch Models
The Cisco Catalyst 9200 Series switches have four modular (C9200) and eight fixed (C9200L) switch models.
The following tables describe all the available Cisco Catalyst 9200 Series switches and the features supported.
Table 1: C9200L Switch Models and Descriptions
DescriptionSwitch Model
Stackable 24x1G PoE+ ports; 4x1G SFP fixed uplink ports; 2 power
supply slots; 2 fixed fans; supports StackWise-80.
C9200L-24P-4G
Stackable 24x1G PoE+ ports; 4x10G SFP+ fixed uplink ports; 2
power supply slots; 2 fixed fans; supports StackWise-80.
C9200L-24P-4X
Stackable 24x1G ports; 4x1G SFP fixed uplink ports; 2 power supply
slots; 2 fixed fans; supports StackWise-80.
C9200L-24T-4G
Stackable 24x1G ports; 4x10G SFP+ fixed uplink ports; 2 power
supply slots; 2 fixed fans; supports StackWise-80.
C9200L-24T-4X
Stackable 48x1G PoE+ ports; 4x1G SFP fixed uplink ports; 2 power
supply slots; 2 fixed fans; supports StackWise-80.
C9200L-48P-4G
Stackable 48x1G PoE+ ports; 4x10G SFP+ fixed uplink ports; 2
power supply slots; 2 fixed fans; supports StackWise-80.
C9200L-48P-4X
Stackable 48x1G ports; 4x1G SFP fixed uplink ports; 2 power supply
slots; 2 fixed fans; supports StackWise-80.
C9200L-48T-4G
Stackable 48x1G ports; 4x10G SFP+ fixed uplink ports; 2 power
supply slots; 2 fixed fans; supports StackWise-80.
C9200L-48T-4X
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
1

DescriptionSwitch Model
Stackable 8xMultigigabit Ethernet PoE+ ports and 16x1G PoE+
ports; 4x10G SFP+ fixed uplink ports; 2 power supply slots; 2 fixed
fans; supports StackWise-80.
C9200L-24PXG-4X
Stackable 8xMultigigabit Ethernet PoE+ ports and 16x1G PoE+
ports; 2x25G SFP28 fixed uplink ports; 2 power supply slots; 2 fixed
fans; supports StackWise-80.
C9200L-24PXG-2Y
Stackable 12xMultigigabit Ethernet PoE+ ports and 36x1G PoE+
ports; 4x10G SFP+ fixed uplink ports; 2 power supply slots; 2 fixed
fans; supports StackWise-80.
C9200L-48PXG-4X
Stackable 8xMultigigabit Ethernet PoE+ ports and 40x1G PoE+
ports; 2x25G SFP28 fixed uplink ports; 2 power supply slots; 2 fixed
fans; supports StackWise-80.
C9200L-48PXG-2Y
Stackable 48x1G PoE+ ports with partial PoE support; 4x1G SFP
fixed uplink ports; 2 power supply slots; 2 fixed fans; supports
StackWise-80.
C9200L-48PL-4G
Stackable 48x1G PoE+ ports with partial PoE support; 4x10G SFP
fixed uplink ports; 2 power supply slots; 2 fixed fans; supports
StackWise-80.
C9200L-48PL-4X
Table 2: C9200 Switch Models and Descriptions
DescriptionSwitch Model
Stackable 24x1G PoE+ ports; 4x1G and 4x10G network modules
for uplink ports; 2 power supply slots; 2 field-replaceable fans;
supports StackWise-160.
C9200-24P
Stackable 24x1G PoE+ ports; 4x1G and 4x10G network modules
for uplink ports; 2 power supply slots; 2 field-replaceable fans;
supports StackWise-160.
C9200-24PB
Stackable 24x1G ports; 4x1G and 4x10G network modules for uplink
ports; 2 power supply slots; 2 field-replaceable fans; supports
StackWise-160.
C9200-24T
Stackable 48x1G PoE+ ports; 4x1G and 4x10G network modules
for uplink ports; 2 power supply slots; 2 field-replaceable fans;
supports StackWise-160.
C9200-48P
Stackable 48x1G PoE+ ports; 4x1G and 4x10G network modules
for uplink ports; 2 power supply slots; 2 field-replaceable fans;
supports StackWise-160.
C9200-48PB
Stackable 48x1G ports; 4x1G and 4x10G network modules for uplink
ports; 2 power supply slots; 2 field-replaceable fans; supports
StackWise-160.
C9200-48T
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
2
Product Overview
Switch Models