Cisco Linksys SGE2000P User manual

Data Sheet
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 6
Cisco SGE2000P 24-Port Gigabit Switch: PoE
Cisco Small Business Managed Switches
High-Performance, Secure Switching with PoE for Small Businesses
Highlights
●24 high-speed ports optimized for the network core or to support bandwidth-intensive
applications
●Resilient Clustering provides the ability to add more switches as needed and to manage the
stack as a single switch, to support growing businesses
●Power over Ethernet easily and cost-effectively powers wireless access points, video
cameras, and other network-connected endpoints
●Strong security protects network traffic to keep unauthorized users off the network
●Intelligent QoS helps ensure a consistent network experience and supports networked
applications including voice, video, and data storage
Figure 1. Cisco SGE2000P 24-Port Gigabit Switch: PoE
Product Overview
The Cisco®SGE2000P 24-Port Gigabit Switch (Figure 1) helps maximize system availability, with
fully redundant stacking, redundant power options, and dual images for resilient firmware
upgrades. The switch helps secure the network through IEEE 802.1Q VLANs, IEEE 802.1X port
authentication, access control lists (ACL), denial-of-service (DoS) prevention, and MAC-based
filtering. The enhanced quality of service (QoS) and traffic-management features help ensure clear
and reliable IP voice and video communications.
For wireless or voice over IP (VoIP) deployments, the Cisco SGE2000P supports the IEEE802.3af
standard for Power over Ethernet (PoE). Automatic load sensing in the power control circuitry
automatically detects PoE on the end device before providing power. For safety, each port has
independent overload and short-circuit protection, along with LED indicators for power status. A
maximum of 15.4W is available on the Fast Ethernet ports for powering PoE-enabled wireless
access points or VoIP handsets, with a maximum per-device PoE delivery of 185W available for all
ports.

Data Sheet
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 6
The Cisco SGE2000P provides an intuitive, secure management interface, enabling network
administrators to better utilize its comprehensive management feature set, for a better-optimized
and more secure network.
Features
●Twenty-four 10/100/1000 Ethernet ports
●Four Small Form-Factor Pluggable (SFP) slots (shared with four copper ports) for fiber
Gigabit Ethernet expansion
●IEEE 802.3af PoE delivered over any of the twenty-four 10/100/1000 copper ports
●Up to 15.4W available on the copper ports for powering PoE-enabled wireless access
points or VoIP handsets, with a maximum per-device PoE delivery of 185W available for all
ports
●Dual images for resilient firmware upgrades
●48-Gbps, nonblocking, store-and-forward switching capacity
●Simplified QoS management using 802.1p, Differentiated Services (DiffServ), or type of
service (ToS) traffic prioritization specifications
●Power redundancy when used with Cisco RPS1000 380W Redundant Power Supply Unit
●Fully resilient stacking for optimized growth with simplified management
●ACLs for granular security and QoS implementation
●Can be configured and monitored from a standard web browser
●Secure remote management of the switch via Secure Shell (SSH) and SSL encryption
●802.1Q-based VLANs enable segmentation of networks for improved performance and
security
●Private VLAN Edge (PVE) for simplified network isolation of guest connections or
autonomous networks
●Automatic configuration of VLANs across multiple switches through Generic VLAN
Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)
●User/network port-level security via 802.1X authentication and MAC-based filtering
●Increased bandwidth and added link redundancy with Link Aggregation Control Protocol
(LACP)
●Enhanced rate-limiting capabilities, including back pressure and multicast and broadcast
flood control
●Port mirroring for noninvasive monitoring of switch traffic
●Jumbo frame support up to 10KB
●Simple Network Management Protocol (SNMP) versions 1, 2c, and 3 and Remote
Monitoring (RMON) support
●Fully rack mountable using the included rack-mounting hardware
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco
SGE2000P 24-Port Gigabit Switch.

Data Sheet
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 6
Table 1. Specifications for the Cisco SGE2000P 24-Port Gigabit Switch: PoE
Specifications
Ports ●24 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 4 shared Gigabit
SFP slots
●Console port
●Auto medium dependent interface (MDI) and MDI crossover (MDI-X)
●Auto negotiate/manual setting
●RPS port for connecting to redundant power supply unit
Buttons Reset button
Cabling type ●Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX
●UTP Category 5 Ethernet or better for 1000BASE-T
LEDs PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 through 8
PoE
IEEE 802.3af PoE delivered over any of the twenty-four 10/100/1000 ports; power budget allows for max power of 15.4W on up
to 12 ports simultaneously.
Performance
Switching capacity Up to 48 Gbps, nonblocking
Forwarding rate
(based on 64-byte packets) Up to 35.7 mpps
Stacking
Stack operation ●Up to 8 units in a stack (192 ports)
●Hot insertion and removal
●Ring and chain stacking options
●Master and backup master for resilient stack control
●Auto-numbering or manual configuration of units in stack
Layer 2
MAC table size 8000
Number of VLANs 256 active VLANs (4096 range)
VLAN ●Port-based and 802.1Q tag-based VLANs
●Protocol-based VLAN
●Management VLAN
●PVE
●GVRP
Head-of-line (HOL) blocking HOL blocking prevention
Layer 3
Layer 3 options ●Static routing
●CIDR (classless interdomain routing)
●128 static routes
●IPv4
●Forwarding in silicon - wire-speed forwarding of Layer 3 traffic
Management
Web user interface Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
SNMP SNMP versions 1, 2c, and 3 with support for traps
SNMP MIBs RFC1213 MIB-2, RFC2863 interface MIB, RFC2665 Ether-like MIB, RFC1493 bridge MIB,
RFC2674 extended bridge MIB (P-bridge, Q-bridge), RFC2819 RMON MIB (groups 1, 2, 3,
and 9 only), RFC2737 entity MIB, RFC3621 Power Ethernet MIB, RFC 2618 RADIUS client
MIB, RFC1215 traps
RMON Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and
events) for enhanced traffic management, monitoring, and analysis.
Firmware upgrade ●Web browser upgrade (HTTP) and Trivial File Transfer Protocol (TFTP)
●Dual images for resilient firmware upgrades
Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or
RMON probe

Data Sheet
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 6
Other management ●Traceroute
●Single IP management
●SSL security for web user interface
●SSH
●RADIUS
●Port mirroring
●TFTP upgrade
●Dynamic Host Configuration Protocol (DHCP) client
●BOOTP
●Simple Network Management Protocol (SNTP)
●Xmodem upgrade
●Cable diagnostics
●Ping
●Syslog
●Telnet client (SSH secure support)
Security
IEEE 802.1X
●802.1X - RADIUS authentication; MD5 hash
●Guest VLAN
●Single/multiple host mode
Access control ACLs - drop or rate limit based on:
●Source and destination MAC-based
●Source and destination IP address
●Protocol
●Port
●VLAN
●Differentiated services code point (DSCP)/IP precedence
●TCP/ User Datagram Protocol (UDP) source and destination ports
●802.1p priority
●Ethernet type
●Internet Control Message Protocol (ICMP) packets
●Internet Group Management Protocol (IGMP) packets
●Up to 1018 rules
Availability
Link aggregation
●Link aggregation using IEEE 802.3ad LACP
●Up to 8 ports in up to 8 groups
Storm control Broadcast and multicast storm protection
DoS prevention DoS attack prevention
Spanning Tree ●IEEE 802.1D Spanning Tree
●IEEE 802.1w Rapid Spanning Tree
●IEEE 802.1s Multiple Spanning Tree, Fast Linkover
IGMP snooping IGMP (versions 1 and 2) snooping limits bandwidth-intensive video traffic to only the
requestors. Supports 256 multicast groups.
Power redundancy Connection to redundant power supply unit for power redundancy
QoS
Priority levels 4 hardware queues
Scheduling Priority queuing and weighted round-robin (WRR)
Class of service ●Port based
●802.1p VLAN priority based
●IPv4 IP precedence/ToS/DSCP based
●DiffServ
●Classification and re-marking ACLs
Rate limiting ●Ingress policer
●Egress rate control
Standards 802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet, 802.3ab 1000BASE-T
Gigabit Ethernet, 802.3z Gigabit Ethernet, 802.3x flow control, 802.3ad LACP, 802.3af
POE, 802.1d Spanning Tree Protocol (STP), 802.1Q/p VLAN, 802.1w Rapid STP, 802.1s
Multiple STP, 802.1X port access authentication

Data Sheet
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 6
Environmental
Dimensions
W x H x D 17.32 x 14.70 x 1.73 in. (440 x 375 x 44 mm)
Unit weight 15.85 lb (7.19 kg)
Certification UL (UL 60950), CSA (CSA 22.2), CE Mark, FCC Part 15 (CFR 47) Class A
Operating temperature 32º to 104ºF (0º to 40ºC)
Storage temperature -4º to 158ºF (-20º to 70ºC)
Operating humidity 10% to 90% relative humidity, noncondensing
Storage humidity 10% to 95% relative humidity, noncondensing
Number of fans 5
Acoustic noise 55 dB Max.
Power 100-240V AC, 50-60 Hz, internal, universal; also equipped with redundant power supply
connector for external power supply, 48V DC
Power consumption ●No PoE supplied: 12V at 8.5A (102W)
●12 ports half power (7.5W):192W
●12 ports full power (15W): 282W
●24 ports half power (7.5W): 282W
Package Contents
●Cisco SGE2000P 24-Port Gigabit Switch
●Console cable
●AC power cord
●Rack-mount kit
●Quick installation guide
Minimum Requirements
●Web browser: Mozilla Firefox 1.5 or later, Internet Explorer 5.5 or later, Netscape 7.01 or later
●Category 5 Ethernet network cable
●TCP/IP protocol installed on each computer within the network
●Network adapter installed in each computer
●Network operating system
Product Warranty
5-year limited hardware warranty with return to factory replacement and 90-day limited software warranty
Cisco Limited Warranty for Cisco Small Business Series Products
This Cisco Small Business product comes with a 5-year limited hardware warranty with return to
factory replacement and a 90-day limited software warranty. In addition, Cisco offers software
application updates for bug fixes and telephone technical support at no charge for the first 12
months following the date of purchase. To download software updates, go to:
http://www.cisco.com/go/smallbiz.
Product warranty terms and other information applicable to Cisco products are available at
http://www.cisco.com/go/warranty.
For More Information
For more information on Cisco Small Business products and solutions, visit:
http://www.cisco.com/smallbusiness.

Data Sheet
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 6
Printed in USA C78-502070-02 08/09