Cisco Linksys SGE2010 User manual

Data Sheet
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 5
Cisco SGE2010 48-Port Gigabit Switch
Cisco Small Business Managed Switches
Performance and Reliability to Support Small Business Networks
Highlights
●48 high-speed ports optimized for the network core or to support bandwidth-intensive
applications
●Resilient clustering provides the ability to manage several switches as a single switch to
support growing businesses
●Advanced security protects network traffic to keep unauthorized users off the network
●Simplified, web-based management for easy installation and configuration
Figure 1. Cisco SGE2010 48-Port Gigabit Switch
Product Overview
The Cisco®SGE2010 48-Port Gigabit Switch (Figure 1) allows you to expand your network
securely. Web-based configuration of the switch is secured using SSL.
The Cisco SGE2010 is optimized for maximum system availability, with fully redundant stacking,
redundant power options, and dual images for resilient firmware upgrades. The switch helps
secure the network through IEEE 802.1Q VLANs, IEEE 802.1X port authentication, access control
lists (ACLs), denial-of-service DoS prevention, and MAC-based filtering. The enhanced quality of
service (QoS) and traffic-management features help ensure clear and reliable voice and video
communications.
The Cisco SGE2010 provides resilient stacking for up to four units, or 192 ports. A stack of units is
managed as a single switch with one web management interface. The Cisco SGE2010 can coexist
in a stack with the Cisco SGE2000 and SGE2000P 24-Port Gigabit Switches and the Cisco
SGE2010P 48-Port Gigabit Switch, for a maximum of 192 ports in a stack. The stacking capability
includes master/backup unit behavior, ring and chain architecture, and hot insertion and removal
of units.
An intuitive, highly secure management interface provides access to the comprehensive feature
set of the Cisco SGE2010, for a better-optimized, more secure network.
Features
●Forty-eight 10/100/1000 Ethernet ports
●Four mini Gigabit Interface Converter (mini-GBIC) slots (shared with four Ethernet ports) for
fiber Gigabit Ethernet expansion

Data Sheet
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 5
●Dual images for resilient firmware upgrades
●96-Gbps nonblocking, store-and-forward switching capacity
●Simplified QoS management using 802.1p, differentiated services (DiffServ), or type of
service (ToS) traffic prioritization
●Power redundancy when used with the Cisco RPS1000 380W Redundant Power Supply
Unit
●Fully resilient stacking provides optimized growth with simplified management
●ACLs for granular security and QoS implementation
●Configuration and monitoring from a standard web browser
●Secure remote management of the switch via Secure Shell (SSH) and SSL encryption
●802.1Q-based VLANs enable segmentation of networks for improved performance and
security
●Private VLAN Edge (PVE) simplifies network isolation of guest connections or autonomous
networks
●Automatic configuration of VLANs across multiple switches through Generic VLAN
Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)
●User/network port-level security via 802.1X authentication and MAC-based filtering
●Increased bandwidth and added link redundancy with Link Aggregation Control Protocol
(LACP)
●Enhanced rate-limiting capabilities, including back pressure and multicast, broadcast, and
flood control
●Port mirroring for noninvasive monitoring of switch traffic
●Jumbo frame support up to 10 KB
●Simple Network Management Protocol (SNMP) versions 1, 2c, and 3 and Remote
Monitoring (RMON) support
●Fully rack mountable using included rack-mounting hardware
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco
SGE2010 48-Port Gigabit Switch
Table 1. Specifications for the Cisco SGE2010 48-Port Gigabit Switch
Specifications
Ports 48 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 4 Gigabit combo ports
shared between mini-GBIC ports; console port; auto MDI/ MDI-X; auto negotiate/manual
setting; RPS port for connecting to redundant power supply unit
Buttons Reset button
Cabling type Unshielded twisted pair (UTP) Category5 or better for 10BASE-T/100BASE-TX; UTP
Category 5 Ethernet or better for 1000BASE-T
LEDs PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 through 8
Performance
Switching capacity 96 Gbps nonblocking
Forwarding capacity 71.4 mpps (64-byte packets)
Stacking

Data Sheet
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 5
Stack operation ●Up to 192 ports in a stack
●Hot insertion and removal
●Ring and chain stacking options
●Master and backup master for resilient stack control
●Auto-numbering or manual configuration of units in stack
Layer 2
MAC table size 8000
Number of VLANs 256 active VLANs (4096 range)
VLAN Port-based and 802.1Q tag-based VLANs, protocol-based VLAN, management VLAN,
multicast TV VLAN, PVE, GVRP
Head-of-line (HOL) blocking HOL blocking prevention
Layer 3
Layer 3 options Static routing; classless interdomain routing (CIDR); 60 static routes; IPv4 and IPv6;
forwarding in silicon - wire-speed forwarding of Layer 3 traffic
IPv6
IPv6 options IPv6 over Ethernet, dual stack, IPv6 over IPv4 network with Intra-Site Automatic Tunnel
Addressing Protocol (ISATAP) tunnel, IPv6 neighbor discovery, stateless address
configuration, maximum transmission unit (MTU) discovery, WEB, SSL, Telnet, Ping,
Traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP),
SNMP, RADIUS, ACLs, QoS, protocol-based VLANs
Management
Web user interface Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
SNMP SNMP versions 1, 2c, and 3 with support for traps
SNMP MIBs ●RFC1213 MIB-2,
●RFC2863 interface MIB
●RFC2665 Ether-like MIB
●RFC1493 bridge MIB
●RFC2674 extended bridge MIB (P-bridge, Q-bridge)
●RFC2819 RMON MIB (groups 1, 2, 3, and 9 only)
●RFC2737 entity MIB
●RFC 2618 RADIUS client MIB,
●RFC 1215 traps
RMON Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and
events) for enhanced traffic management, monitoring, and analysis)
Firmware upgrade ●Web browser upgrade (HTTP/HTTPS) and TFTP
●Dual images for resilient firmware upgrades
Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or
RMON probe.
Other management Traceroute, single IP management, SSL security for web user interface, SSH, RADIUS,
port mirroring, TFTP upgrade, Dynamic Host Configuration Protocol (DHCP) client,
BOOTP, SNTP, Xmodem upgrade, cable diagnostics, Ping, syslog, Telnet client (SSH
secure support)
Security
IEEE 802.1X 802.1X RADIUS authentication, MD5 hash; guest VLAN; single/multiple host mode
ACLs ●Drop or rate limit based on source and destination MAC or IP address, protocol, port,
VLAN, differentiated services code point (DSCP)/IP precedence, TCP/ User Datagram
Protocol (UDP) source and destination ports, 802.1p priority, Ethernet type, Internet
Control Message Protocol (ICMP) packets, Internet Group Management Protocol
(IGMP) packets, DHCP snooping, Address Resolution Protocol (ARP) inspection, and
IP source address guard
●Up to 1018 rules
Availability
Link aggregation Using IEEE 802.3ad LACP, up to 8 ports in up to 8 groups
Storm control Broadcast, multicast, and unknown unicast
DoS prevention DoS attack prevention

Data Sheet
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 5
Spanning Tree ●IEEE 802.1D Spanning Tree
●IEEE 802.1w Rapid Spanning Tree
●IEEE 802.1s Multiple Spanning Tree and Fast Linkover
IGMP (version 1 and 2)
snooping Limits bandwidth-intensive multicast traffic to onlythe requestors; supports 256 multicast groups
Power redundancy Connection to RPS unit for power redundancy
Quality of Service
Priority levels 4 hardware queues
Scheduling Priority queuing and weighted round-robin (WRR)
Class of service Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/ToS/DSCP based;
DiffServ; classification and re-marking ACLs
Rate limiting Ingress policer; egress rate control; per VLAN
Statistics 16 meters
Standards
●802.3 10BASE-T Ethernet
●802.3u 100BASE-TX Fast Ethernet
●802.3ab 1000BASE-T Gigabit Ethernet
●802.3z Gigabit Ethernet
●802.3x flow control
●802.3ad; 802.1D Spanning Tree Protocol (STP)
●802.1Q/p VLAN
●802.1w Rapid STP
●802.1s Multiple STP
●802.1X port access authentication
Environmental
Dimensions
W x H x D 17.32 x 14.70 x 1.73 in. (440 x 375 x 44 mm)
Unit weight 10.89 lb (4.94 kg)
Power 100–240V 47–63 Hz, internal, universal; also equipped with external redundant power
supply connector for external power supply, -48V DC
Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47)
Operating temperature 32°to 104°F (0°to 40°C)
Storage temperature -4°to 158°F (-20°to 70°C)
Operating humidity 10% to 90%, relative, noncondensing
Storage humidity 10% to 95%, relative, noncondensing
Package Contents
●Cisco SGE2010 48-Port Gigabit Switch
●AC power adapter with power cord
●Two rack-mounting kits with eight screws
●CD-ROM with user documentation (PDF) included
●Registration card
●Console cable
Minimum Requirements
●Web browser: Mozilla Firefox version 1.5 or later, or Microsoft Internet Explorer version 5.5 or later
●Category 5 Ethernet network cable
●TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on
each computer in the network
Product Warranty
5-year limited hardware warranty with return to factory replacement and 90-day limited software warranty

Data Sheet
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 5
Cisco Limited Warranty for Cisco Small Business Series Products
This Cisco Small Business product comes with a 5-year limited hardware warranty with return to
factory replacement and a 90-day limited software warranty. In addition, Cisco offers software
application updates for bug fixes and telephone technical support at no charge for the first 12
months following the date of purchase. To download software updates, go to:
http://www.cisco.com/go/smallbiz.
Product warranty terms and other information applicable to Cisco products are available at
http://www.cisco.com/go/warranty.
For More Information
For more information on Cisco Small Business products and solutions, visit:
http://www.cisco.com/smallbusiness
Printed in USA C78-502072-01 08/09