Cisco SD216 Reference manual

Get to Know the Linksys SD216
Document ID: 108609
Questions
Introduction
What do the lights mean on the SD216, and what are its features?
NetPro Discussion Forums − Featured Conversations
Related Information
Introduction
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business
products (formerly Linksys Business Series).
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Q. What do the lights mean on the SD216, and what are its features?
A. Front Panel and LEDs of Switch
Back Panel of Switch

Side Panels of Switch

Ideal for integrating your 10BaseT and 100BaseTX network hardware♦ Has eight 10/100 ports provide dedicated bandwidth in half− or full−duplex modes♦ Has ports that support auto MDI/MDI−X cable detection♦ Compatible with all major network operating systems♦ Has advanced store−and−forward packet switching optimizes data transfers♦ Has auto partitioning that protects PCs from downed network lines♦ Has signal regeneration that ensures data transfer integrity♦
How do you connect network devices to the Switch?
Follow this link for instruction as an example of typical network configuration.
NetPro Discussion Forums − Featured Conversations
Networking Professionals Connection is a forum for networking professionals to share questions, suggestions,
and information about networking solutions, products, and technologies. The featured links are some of the
most recent conversations available in this technology.
NetPro Discussion Forums − Featured Conversations for LAN
Network Infrastructure: LAN Routing and Switching
Network Infrastructure: Getting Started with LANs
Related Information
10/100 Switches User Guide• Technical Support & Documentation − Cisco Systems•
Contacts & Feedback | Help | Site Map
© 2008 − 2009 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of
Cisco Systems, Inc.
Updated: May 15, 2009 Document ID: 108609