Cisco SRW2008MP Quick start guide

Table of contents

Other Cisco Switch manuals

Cisco

Cisco ME 3400 Series Operating manual

Cisco

Cisco MDS 9124e User manual

Cisco

Cisco 3020 - Cisco Catalyst Blade Switch User manual

Cisco

Cisco Cisco Small Business Unmanaged Switch SR224 User manual

Cisco

Cisco GS7000 Operator's manual

Cisco

Cisco Catalyst 4500 Series User manual

Cisco

Cisco Catalyst X6324 User manual

Cisco

Cisco Nexus 3600 NX-OS User manual

Cisco

Cisco 2960-48TC - Catalyst Switch Manual

Cisco

Cisco 3845 - Security Bundle Router Quick start guide

Cisco

Cisco Catalyst 3750-X Series User manual

Cisco

Cisco 500 Series User manual

Cisco

Cisco OptoStar II User manual

Cisco

Cisco Aironet 350 Series Instruction Manual

Cisco

Cisco WS-X6066-SLB-APC - Content Switching Module Installation and operation manual

Cisco

Cisco Catalyst 9200 Series User manual

Cisco

Cisco Nexus 4001I User manual

Cisco

Cisco LS2020 User manual

Cisco

Cisco 2950-12 - Catalyst Switch Dimensions

Cisco

Cisco MDS 9700 Series Instruction Manual

Cisco

Cisco MDS 9396T Instruction Manual

Cisco

Cisco Catalyst Series Switch 2940 User manual

Cisco

Cisco Catalyst 6500-E Series User manual

Cisco

Cisco C9200L-48P-4G User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Getting started guide

Vimar

Vimar 6592 Installer's guide

SRW2008MP Firmware Upgrade FAQ

Document ID: 109169

Questions

Introduction

How do I upgrade the firmware on the SRW2008MP?

Related Information

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business

products (formerly Linksys Business Series).

Refer to Cisco Technical Tips Conventions for information on document conventions.

Q. How do I upgrade the firmware on the SRW2008MP?

A. Complete the appropriate procedure in this section in order to upgrade the firmware on the

SRW2008MP.

Firmware Download

Download new firmware from the Cisco Software Center.

Note: Cisco recommends that you perform all firmware upgrades on your local network.

Firmware Upgrade via Web UI

Enter the IP address for your switch in a browser. For example, if your switch uses

the default IP address, enter http://192.168.1.254 in your browser in order to access

the switch.

1.

On the login screen, enter admin in the User Name field and leave the password

blank.

2.

Go to Admin > Firmware Upgrade.3. Click the via HTTP radio button.4.

Click Browse in order to locate the firmware file.5.

Click Proceed.6.

Note: Do not reset or unplug the power while the firmware upgrade is in progress.

Firmware Upgrade Via TFTP Upgrade

Note: TFTP server software is required for this procedures.

Enter the IP address for your switch in a browser. For example, if your switch uses

the default IP address, enter http://192.168.1.254 in your browser in order to access

the switch.

1.

On the login screen, enter admin in the User Name and Password fields.2. Once logged in, go to Admin > Firmware Upgrade.3. Click via TFTP, and then click the Upgrade radio button4.

Choose Software Image from the File Type drop−down list.5. In the TFTP server field, enter the IP address of the computer that runs the TFTP

software.

6.

In the Destination File field, enter the file name for the firmware file.7. Click Proceed.

Note: Do not reset or unplug the power while the firmware upgrade is in progress.

8.

Related Information

Technical Support & Documentation − Cisco Systems•

Contacts & Feedback | Help | Site Map

© 2008 − 2009 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of

Cisco Systems, Inc.

Updated: Dec 12, 2008 Document ID: 109169