Cisco SRW224G4P - Small Business Managed Switch Quick start guide

Ways of upgrading the firmware of SRW224G4P
Document ID: 109133
Q. How do I upgrade the firmware of my SRW224G4P?
A.
Upgrading the Firmware of the SRW224G4P through Web Interface
Via HTTP Upgrade:
Step 1:
Download the latest firmware from www.linksys.com/download to your desktop.
Step 2:
Accessed the switch's web interface via http://192.168.1.254 (this assumes that the switch is
on default settings).
Step 3:
On the login screen, enter admin on the username field and leave the password blank.
Step 4:
Once logged in, go to Admin>HTTP Upgrade. Browse for the firmware file then click on
Proceed.
Via TFTP Upgrade:
Note: A TFTP Server Software is required for the following procedures. Please refer to the software's guide or
developer for its proper configuration.
Step 1:
Download the latest firmware from www.linksys.com/download to your desktop.
Step 2:
Accessed the switch's web interface via http://192.168.1.254 (this assumes that the switch is
on default settings).

Step 3:
On the login screen, enter admin on the username field and leave the password blank.
Step 4:
Once logged in, go to Admin>Firmware Upgrade. Click Upgrade then for the File Type
choose Software Image. On the TFTP Server field, enter the IP address of the computer
running the TFTP Software. Leave the Source File field blank and type the filename of the
firmware on the Destination File.
Step 5:
Click on Proceed.
Related Information
Technical Support &Documentation − Cisco Systems•
Updated: Dec 12, 2008 Document ID: 109133