Citizen Eco-Drive E784 User manual

E784 Abbreviated instruction
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual: E784 instruction manual
English
Component identification
Area indication
Crown
SMT
ON
OFF
Hour
hand
Second
hand
Minute hand
Button
(recessed)
Date
indication
Summer time setting
( SMT ON/OFF )
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
Setting the world time
This watch can indicate the time around the world according to which of 26 time
zones (offsets from UTC — Coordinated Universal Time) is chosen.
1. Pull the crown out to position 1.
The second hand points the time zone currently set.
2. Rotate the crown clockwise to select an area.
The hour and minute hands start moving as you finished to select an area.
• Date indication also moves synchronously.
3. When the hands and indication stop, Push the crown in to
position 0to finish the procedure.
Table of time zones and representative places
• Countries or regions may change time zones for various reasons.
• When using the watch in an area not listed in the table, select an area name in
the same time zone.
Time zone Second
hand Area name Representative area
0
0
LON
London
+1
2
PAR
Paris
+2
4
ATH
Athens
+3
7
RUH
Riyadh
+4
9
DXB
Dubai
+5
11
KHI
Karachi
+5.5
14
DEL
Delhi
+6
16
DAC
Dhaka
+7
18
BKK
Bangkok
+8
21
BJS
Beijing /Hong Kong
+9
23
TYO
Tokyo
+9.5
25
ADL
Adelaide
+10
28
SYD
Sydney
+11
30
NOU
Noumea
+12
32
AKL
Auckland
-11
35
MDY
Midway
-10
37
HNL
Honolulu
-9
39
ANC
Anchorage
-8
42
LAX
Los Angeles
-7
44
DEN
Denver
-6
46
CHI
Chicago
-5
49
NYC
New York
-4
51
MAO
Manaus
-3
53
RIO
Rio de Janeiro
-2
56
FEN
Fernando de Noronha
-1
58
PDL
Azores
• The offsets in the table are based on the standard time.
Crown's position
0 1 2

4. Rotate the crown clockwise to adjust the year and month
setting.
• If you rotate the crown quickly a few times, the hand will move
continuously. To stop the rapid movement, rotate the crown clockwise.
12
1
2
3
4
5
6
7
8
9
10
11
“Month” corresponds to one of
the 12 zones shown in the figure
below.
Each number means month.
The year corresponds to the
years since leap year and is
indicated with the position of the
second hand.
Years since leap year: 0 (Leap
year)
0
Years since leap year: 1
1
Years since leap year: 2
2
3
Years since leap year: 3
5. Rotate the crown counterclockwise to set the date indication.
6. Press the button to finish the procedure.
E784 Abbreviated instruction
Setting summer time
• The summer time setting ( SMT ON/OFF ) you set is applied to all the time zones
of the world time.
1. Push the crown in to position 0.
2. Press and release the button.
The second hand indicates the current summer time setting.
• The watch returns to normal indication in 10 seconds without any
operation during the steps below.
3. Rotate the crown to switch the summer time setting ( SMT
ON/OFF
).
SMT ON
SMT
ON
OFF














































































Summer time is indicated.
SMT OFF
SMT
ON
OFF














































































The standard time is indicated.
• Each time you rotate the crown clockwise, the setting changes alternately.
4. Press the button to finish the procedure.
Setting the time and calendar
• Before adjusting time and calendar, check the time zone of the time and
calendar to set and its summer time status and adjust the setting of world time
and that of summer time (
SMT ON/OFF ) correctly.
Setting the time
1. Pull the crown out to position 2.
The second hand points to 0 seconds and stops.
• Adjust the reference position before time and calendar adjustment if the
second hand does not point 0 seconds following the steps of “Correcting
the reference position”.
2. Rotate the crown to set hour and minute.
• When you rotate the crown quickly a few times, the hand/indication will
move continuously. To stop the rapid movement, rotate the crown in either
direction.
• Date indication also moves synchronously. Change of date indication
shows it just became AM.
• Date indication does not change while moving the hands counterclockwise.
3. Push the crown in to position 0in accordance with a reliable
time source to finish the procedure.
Setting the calendar
1. Push the crown in to position 0.
2. Press and release the button.
The second hand indicates the current summer time setting.
• Execute the next step within 10 seconds.
3. Press and hold the button for 2 seconds or more while the
second hand indicates the summer time setting.
The second hand turns fully around and indicates the current year and
month setting.
• Release the button when the second hand starts moving.
• The watch returns to normal indication in 30 seconds without any
operation during the steps below.

Correcting the reference position
Adjust the reference position when the second
hand does not point 0 seconds while the crown
is in position
2
.
Correct reference positions:
• Hour, minute and second hands: 0 hour 00
minute 0 second
• Date indication: “1”
• Do not adjust the reference position when
the watch indicates 11:50 PM - 12:10 AM.
Otherwise, the date indication may change
incorrectly.
1. Pull the crown out to position 2.
2. Press and release the button.
All Reset is executed.
The setting values after All Reset
Time 0:00:00AM
Calendar January 1 of leap year
World time
LON
Summer time
SMT OFF
3. Rotate the crown to set the hour and minute hands to 0 hours
00 minutes.
• If you rotate the crown quickly a few times, the hand will move
continuously. To stop the rapid movement, rotate the crown in either
direction.
4. Push the crown in to position 1.
5. Rotate the crown clockwise to set the second hand to 0 second.
• If you rotate the crown quickly a few times, the hand will move
continuously. To stop the rapid movement, rotate the crown clockwise.
6. Rotate the crown counterclockwise to set the date indication
to “1”.
• When you rotate the crown quickly a few times, the indication will
move continuously. To stop the rapid movement, rotate the crown
counterclockwise.
• Rotate the crown while pressing and holding the button to adjust the
position finely.
7. Push the crown in to position 0to finish the procedure.
The reference position is updated and the second hand starts moving.
• Adjust the time and calendar after that.
E784 Abbreviated instruction
SMT
ON
OFF
1













































































