Claridge calyx XCHANGE User manual
XCHANGE
Changeable Graphics Board
ASSEMBLY INSTRUCTIONS
WARNING
Risk of injury to installers and users
Read the enre assembly direcons before
beginning assembly.
• After unpacking and inspecting your new Xchange board, lay on a
flat surface and remove graphic insert.
• Remove the screw on the top &
bottom of the side that your graphic
insert will be sliding in and out of
once on the wall, along with plastic
endcaps.
800-434-4610
Calyxbyclaridge.com
Xchange Board
Assembly
• Mount frame in desired location,
using the appropriate wall an-
chors.
• Install top channel followed by the
bottom channel.
• Now you are ready to reinsert your
glass, followed by the endcaps
and screws.
• Finally reinstall your graphic insert.
• Gently remove the glass and place in a safe place.
Table of contents
