Clarinet Systems EtherUSB EA104 User manual

EtherUSB™
AdminTool User Manual
V 1.6
Clarinet Systems, Inc.

EtherUSB and EthIR LAN AdminTool User Manual
Publication Revision No. Control Table
Rev. No. Date Contents
1.6 04/28/08 Change the Home page and USB Ports page.
1.5 05/25/07
Replace name on login page on page 1.
Replace pictures from page 2 to 8.
1.4 04/26/07
1.1 02/08/07 Updated GUI screenshots
1.0 01/16/07
0.6 10/25/06
Added Demo Unit Connections & synced with GUI screenshots. Polish
minor mismatch points in the pages.
Copyright
Copyright 2006-2008 Clarinet Systems, Inc. All rights reserved. Information in
this document is subject to change without notice. No part of this publication
may be transmitted, transcribed, reproduced, stored in any retrieval system or
translated into any language or computer language in any form or by any means,
mechanical, electronic, optical, chemical, manual or otherwise, without the prior
written permission of Clarinet Systems, Inc., 48834 Kato Road, #101A, Fremont,
CA 94538
Clarinet Systems and EtherUSB are trademarks of Clarinet Systems, Inc.
All other company and product names are trademarks or registered trademarks
of their respective owners.
Clarinet Systems, Inc //www.clarinetsys.com Page i

EtherUSB and EthIR LAN AdminTool User Manual
Table of Contents
Introduction & Login Screeen--------------------------------------------------------------------1
Home Page-------------------------------------------------------------------------------------------2
Identification ----------------------------------------------------------------------------------------3
Network Settings - Device -------------------------------------------------------------------------4
Network Settings – USB Ports -------------------------------------------------------------------5
System Admin - Admin Settings ------------------------------------------------------------------5
System Admin - Firmware Update ---------------------------------------------------------------6
Reports & Stats--------------------------------------------------------------------------------------7
Clarinet Systems, Inc //www.clarinetsys.com Page ii

EtherUSB and EthIR LAN AdminTool User Manual
Introduction
This document describes the graphic user interface (GUI) of the EtherUSB™ AdminTool
and is designed to explain by graphic examples the functions of this configuration and
administration software utility. AdminTool can be accessed via URL http://IP-
address:9876 or http://Device-name:9876. EA104 belongs to EtherUSB product line.
This AdminTool also is shared by EthIR LAN™ ESB5001/5004.
Login Screen
When the EA104 device is plugged in and connected to the network, open an Internet
Explorer browser window and enter the following into the URL area and press enter.
http://IP-address:9876 (or http://Device-name:9876)
Login Screen will be presented.
The default User name and Password are admin/password. Click “OK” to continue.
Clarinet Systems, Inc //www.clarinetsys.com Page 1

EtherUSB and EthIR LAN AdminTool User Manual
Home Page
This page displays the current settings and configuration being used by the
system. For example, if the EA104 device is set for DHCP, the IP Address area will
display the DHCP IP address received from DHCP server.
The Uptime area displays the duration since the last power cycling of the device, which
is calculated and displayed as the number of days with the format xxxx, and hours
updated per second with the format xx:xx:xx (<hours:minutes;second>).
Clarinet Systems, Inc //www.clarinetsys.com Page 2

EtherUSB and EthIR LAN AdminTool User Manual
Identification
The Identification page displays the stored Device Name setting for the device. The
user can modify the fields and click on Apply to have the new settings saved into the
system. All modifications will take effect only after and “System Restart” are
selected on the Admin Settings page or the unit is power cycled.
The following box will be prompted once is clicked.
The page will be refreshed once is clicked
Clarinet Systems, Inc //www.clarinetsys.com Page 3

EtherUSB and EthIR LAN AdminTool User Manual
Network Settings - Device
The Network Settings - Device page displays the stored network-related settings for
the device. The user can modify the fields and click on Apply to have the new settings
saved into system. All modifications will take effect only after and “System
Restart” are selected on the Admin Settings page or the unit is power cycled.
The following box will be prompted once is clicked.
Clarinet Systems, Inc //www.clarinetsys.com Page 4

EtherUSB and EthIR LAN AdminTool User Manual
The page will be refreshed once is clicked.
Network Settings – USB Ports
The Network Settings – USB Ports page displays the Default IP Group or Alternative
IP Group settings for USB ports. The user can modify the fields and click on Apply to
have the new settings saved into flash memory. All modifications will take effect only
after and “System Restart” are selected on the Admin Settings page or the
unit is power cycled.
The following box will be prompted once is clicked.
The page will be refreshed once is clicked.
System Admin. – Admin Settings
Clarinet Systems, Inc //www.clarinetsys.com Page 5

EtherUSB and EthIR LAN AdminTool User Manual
The Administration page provides administration configuration for the device. The
user can modify the fields and click on Apply to have settings saved into flash memory.
New Password/Password Confirmation, System Restart, and Restore Factory Default
will take effect after is selected, without the need of selecting “System
Restart” on the Admin Settings page or power cycling. Only one action at a time: either
“System Restart” or “Restore Factory Default” can be selected as “Yes”.
The following box will be prompted once is clicked to change password.
System Admin. - Firmware Update
Clarinet Systems, Inc //www.clarinetsys.com Page 6

EtherUSB and EthIR LAN AdminTool User Manual
The Firmware Update page allows the user to update the device with updated
firmware. The new firmware will take effect only after “SYSTEM RESTART” on the
Admin Settings page is selected or upon power cycling.
The following box will be prompted once update is complete (~65 seconds after
is clicked), then followed by System Restart which will take another 25
seconds to finish.
Caution: please don’t power cycle or reset the device during Firmware Update.
Reports & Stats
Clarinet Systems, Inc //www.clarinetsys.com Page 7

EtherUSB and EthIR LAN AdminTool User Manual
The Reports & Stats page provides the user Event Logs with information about the
device status. Selecting “Clear Event Log” will reset the Event Logs and take effect
after clicking, without the need for selecting “SYSTEM RESTART” on Admin Settings
page or power cycling. One hundred latest events will be kept. Event number will
restart after power up, System Restart, and Restore Factory Default.
The following box will be prompted once “Clear Event Log” is clicked.
The page will be refreshed once is clicked.
Clarinet Systems, Inc //www.clarinetsys.com Page 8