Clarion N.I.C.E. 430 User manual

English
N.I.C.E. 430 1
Quick Reference Guide
N.I.C.E. 430
Portable Navigation System
NICE430QuickReference.indd 1NICE430QuickReference.indd 1 2/2/2007 1:03:32 PM2/2/2007 1:03:32 PM

English
2 N.I.C.E. 430
English
N.I.C.E. 430 3
1. GETTING STARTED
Components
Touch screen
Bluetooth indicator
Charge indicator
Microphone
Speaker
Connector for optional external GPS antenna
Stylus Power
Navigation
Secure Digital/
MultiMediaCard slot
Reset
Head-
phones
Mini-USB Connector/TMC
Stylus
Included accessories
Vehicle charging
cable
USB cable
Cradle attached
to mounting
bracket
Mounting
pad
Optional accessories
• External antenna for better satellite reception
• Traffic Message Channel (TMC) module (NAVRDS) for receiving
radio transmissions concerning traffic, weather, and other driving
conditions
• Secure Digital and MultiMediaCard storage cards
Charging the battery using a computer
Before using the N.I.C.E. 430, completely charge the battery.
1. Turn on your computer.
2. Plug in the mini-USB end of the Universal Serial Bus (USB) cable to
the USB connector on the bottom edge of the N.I.C.E. 430.
3. Plug the other end into a USB port on your computer. The charge
indicator glows red, indicating the battery is charging.
NICE430QuickReference.indd 2-3NICE430QuickReference.indd 2-3 2/2/2007 1:03:37 PM2/2/2007 1:03:37 PM

English
4 N.I.C.E. 430
English
N.I.C.E. 430 5
Charge
indicator
When the charge indicator glows green, the battery is fully charged.
Powering on and off
1. The first time you use the N.I.C.E. 430, press and
hold the power button ( ) for six seconds. This
is necessary because the unit’s power is off. The
N.I.C.E. 430 displays the main menu.
Start navigation
Play music (MP3,
WAV and WMA)
Display photos (JPG, GIF and BMP files
Customize system settings
After the first time, briefly press to enter “sleep mode.” Press power
briefly again to turn the power fully on.
To fully power off, press and hold the power button until the
Bluetooth indicator flashes blue one time.
2. Remove the stylus from its storage compartment.
Selecting the language and setting the time
These steps are required the first time you use the N.I.C.E. 430.
1. Tap Settings > Language.
The Switch Language screen appears.
2. Select the language from the drop-down
menu and tap the check mark button to
save your selection.
3. Tap Date/Time. The Date/Time screen
appears.
4. Use the arrows to select the time zone.
GMT-5 Eastern US GMT-8 Pacific US
GMT-6 Central US GMT-9 Alaska
GMT-7 Mountain US GMT-10 Hawaii
5. Use the arrows to set the date and current time.
6. Tap the check mark button to save your selections. The Main menu
appears. The device is ready to use.
Stylus
NICE430QuickReference.indd 4-5NICE430QuickReference.indd 4-5 2/2/2007 1:03:38 PM2/2/2007 1:03:38 PM

English
6 N.I.C.E. 430
English
N.I.C.E. 430 7
2. NAVIGATING
You may use the N.I.C.E. 430 to navigate while you drive by mounting it
in a vehicle or as a pedestrian by holding it in your hand.
Attaching the mounting bracket to the vehicle
CAUTION
Position the mounting bracket where the N.I.C.E.
430 will not block the driver’s field of vision.
1. Based on where you plan to mount the bracket, attach the cradle to
the mounting bracket.
Position for
mounting
on the
dashboard
Position for
mounting
on the
windshield
Adjustment knobs
Compression lever
Suction tab
Mounting pad
Mounting bracket
Cradle
Release tab
2. If mounting on the dashboard, remove the backing on the mounting
pad and attach the pad to the dashboard. If mounting on the
windshield, you don’t need the mounting pad.
3. Place the mounting bracket in position with the suction cup touching
the mounting pad or the windshield.
4. Press the compression lever.
5. Use the adjustment knobs as needed.
Removing the mounting bracket
1. If the power cord is connected, disconnect it from the USB port on
the N.I.C.E. 430.
2. Hold the mounting bracket and cradle, then lift the lever.
3. If the mounting bracket and cradle do not drop away from the
mounting pad or windshield, gently pull on the suction tab.
Removing the N.I.C.E. 430 from the cradle
To remove the N.I.C.E. 430 from the cradle, press on the release tab.
NICE430QuickReference.indd 6-7NICE430QuickReference.indd 6-7 2/2/2007 1:03:39 PM2/2/2007 1:03:39 PM

English
8 N.I.C.E. 430
English
N.I.C.E. 430 9
Charging the battery in the vehicle
CAUTION
To protect the N.I.C.E. 430 from receiving a sud-
den surge of current, start the ignition before
plugging into the cigarette lighter.
1. Start the vehicle’s ignition.
2. Plug in the mini-USB end of the Vehicle charging cable into the USB
connector on the bottom edge of the N.I.C.E. 430.
Vehicle charging cable
To USB port
To cigarette lighter
3. Plug the other end into the cigarette lighter.
Navigating to a destination
1. Tap the navigation icon on the Main menu. It takes approximately 10
seconds to load the map and display the navigation menu.
Battery charge
View progress
Define destination
Configure navigation
View Global Positioning
System (GPS) status
Current position
Current date and time
Open map screen Display software information
Return to the Main menu
2. Tap Destination. The N.I.C.E. 430 displays the Find menu.
3. Tap Address or POI (point of interest) and define the location.
When you’re finished, the N.I.C.E. 430 displays the map.
NICE430QuickReference.indd 8-9NICE430QuickReference.indd 8-9 2/2/2007 1:03:39 PM2/2/2007 1:03:39 PM

English
10 N.I.C.E. 430
English
N.I.C.E. 430 11
Map screens
Turn preview &
Route menu
Zoom in Zoom out
Tilt down
Tilt up
Tilt down
Tilt up
Lock-to-position
Track log to
record or
playback route
Battery status
Compass (tap
for overview)
GPS position
and quality
Volume
Distance to
next turn
Route data
Next turn
approach
Main menu Cursor menu
Main menu
Map scale
(drag to zoom)
Current street
Zoom out
Next street
Location
Cursor
Active route
Destination
Cockpit
Terms in italic are defined as follows:
Active route: Current route. An journey may consist of multiple legs.
Only one can be active.
Compass: Arrow pointer indicating the direction of north.
Cursor: Red bulls eye that serves as the starting point, via point,
destination or POI.
Lock-to-position: State in which the blue (or yellow) arrow always
represents your current global position. If you move the cursor away,
the button changes from “Follow” to “Lock.” Tap Lock to readjust the
map so that the arrow again identifies your current global position.
POI: Point of Interest
Tilt: Gradually changing the map from 2D to 3D and vice versa.
Track log: Record of a journey, which you can replay later.
Navigation options
1. On the main navigation menu, tap Settings.
2. Select the grouping of options to change.
Set colors and safety
Set beeps and voice
Set map appearance
Set route calculation
Set language, units, date Configure more options
3. After making changes, tap the back button to return to the main
screen. The software saves your change(s).
To restore the default values for the advanced settings, tap Settings >
Advanced > Reset Advanced Settings.
NICE430QuickReference.indd 10-11NICE430QuickReference.indd 10-11 2/2/2007 1:03:40 PM2/2/2007 1:03:40 PM

English
12 N.I.C.E. 430
English
N.I.C.E. 430 13
3. PLAYING MUSIC
The Secure Digital/MultiMediaCard (SD/MMC) slot on the top of the
N.I.C.E. 430 supports up to a 2 GB SD card (for music and or pictures).
Inserting a SD/MMC card
Insert card with the connector toward the slot and the label side up.
Card connector
Label side
SD/MMC port
Removing a SD/MMC card
1. Make sure that no audio file is being played or no photos are being
displayed by returning to the Main menu.
2. Slightly push in on the top edge of the card. The N.I.C.E. 430
releases the card.
3. Pull the card out and store it in its protective case.
Audio features
To play music, tap the Audio icon on the Main menu. The N.I.C.E. 430
displays the Audio Player controls.
Play/pause
Previous
Stop Next
Repeat current file
Exit
Volume
Repeat all files in current
play list in sequence Shuffle: play back current
play list in random order
Intro/Sampling: play back 10 seconds
of each file in random order
Normal: play back all
current files in sequence
Equalizer
Play list
Minimize
Current volume settingPlay back time
Battery charge
Repeat setting
NICE430QuickReference.indd 12-13NICE430QuickReference.indd 12-13 2/2/2007 1:03:40 PM2/2/2007 1:03:40 PM

English
14 N.I.C.E. 430
English
N.I.C.E. 430 15
Equalizer panel
Cycle through options: Normal, Hall, 3D, Soft,
Disco, Heavy, Dance, Classic, Jazz, Pop and Rock
Select default profile
Exit without confirmation
Confirm selection and exit
4. VIEWING PHOTOGRAPHS
Exit
Page up
Page down
Delete selected photoOpen selected photo
Start slide show
Selected photo
Total number of photos
Green frame indicates
selected photo
Tap the thumbnail twice to view selected photo in full screen.
To return to the thumbnail view, tap anywhere, then tap Exit.
5. SETTINGS
Lighten backlightDarken backlight
Decrease volume Increase volume
Start alignment
Charge remaining
Automatic power off options
Set time zone
Set hours, minutes, secondsSet date
Confirm settings and exit
Exit without
confirmation
NICE430QuickReference.indd 14-15NICE430QuickReference.indd 14-15 2/2/2007 1:03:41 PM2/2/2007 1:03:41 PM

English
16 N.I.C.E. 430
English
N.I.C.E. 430 17
6. Hands-free phone interface
The built-in Bluetooth phone interface works together with your
Bluetooth-enabled mobile phone to provide hands-free calling.
Pairing with the phone
1. Turn on both the N.I.C.E. 430 and your mobile phone.
2. Wait for the phone to pair with the N.I.C.E. 430 or tap Settings >
Bluetooth icon > Pair mode.
3. Initiate pairing on the mobile phone. See the owner’s manual for the
phone.
4. Enter the passkey (0000), if required, on both the phone and the
N.I.C.E. 430.
Name of connected mobile phone
Keypad
Pair mode
Bluetooth manager
Reconnect
Call history
Exit (Minimize)
The next time you tap Settings > Bluetooth icon, the N.I.C.E. 430
automatically searches and pairs with up to eight pre-paired phones.
Placing a call
1. Tap the keypad button on the Bluetooth HF Phone screen.
2. Enter the telephone number using the keypad.
Backspace to change a number
Call history
Place call when number complete
When making an international call, tap and hold the 0 key to enter
the + sign that appears before the country code.
Open keypad e.g.
to enter extension
Mute microphone
End callSwitch call to your
mobile phone
Increase/decrease volume Exit
Volume setting
Call duration
Viewing call history
Tap Call history. The N.I.C.E. 430 displays the call history screen.
1. Tap the Call history button. The N.I.C.E. 430 displays the 20 most
recent incoming calls.
NICE430QuickReference.indd 16-17NICE430QuickReference.indd 16-17 2/2/2007 1:03:42 PM2/2/2007 1:03:42 PM

English
18 N.I.C.E. 430
English
N.I.C.E. 430 19
Incoming history
Outgoing history
Missed calls
Dial the selected number
Page up
Page down
Go back
Clear all in current list
Delete current selection
2. Tap one of the buttons at the top of the screen to display incoming
or outgoing calls and missed calls.
Receiving a call
After pairing, when a call comes in, the N.I.C.E. 430 rings and displays
the Incoming Call screen.
Accept call Reject call
Mute ring tone before accepting or rejecting
Increase/decrease volume Exit
Signal strength
NICE430QuickReference.indd 18-19NICE430QuickReference.indd 18-19 2/2/2007 1:03:42 PM2/2/2007 1:03:42 PM

English
20 N.I.C.E. 430
Clarion Corporation of America
All Rights Reserved. Copyright © 2007: Clarion Corp. of America
Printed in China
NICE430QuickReference.indd 20NICE430QuickReference.indd 20 2/2/2007 1:03:43 PM2/2/2007 1:03:43 PM