Clarion QY-8600 User manual

MODEL QY-8650
Navigation system manual
Car Navigation

1
English
Table of contents
Features ������������������������������������������������������������ 5
Names of Various Parts ���������������������������������������������������� 5
Basic method of use ����������������������������������������������������� 6
Basic Operations ������������������������������������������������������� 7
Basic Settings ��������������������������������������������������������� 8
Source Media Mode ����������������������������������������������������� 12
Bluetooth Operation ����������������������������������������������������� 14
Navigation ���������������������������������������������������������� 15
Navigation System Settings ������������������������������������������������ 20
Outline of Destination ���������������������������������������������������� 24
Entering Procedures ���������������������������������������������������� 24
Entering the Destination �������������������������������������������������� 26
Route Guidance ������������������������������������������������������� 29
About Information ������������������������������������������������������ 32

2
English
Safety Precautions
Warning
●When driving, the driver shall not operate….
The driver must park the vehicle in a safe place before
operating the system.
●When driving, the driver must not read the navigation
map…
Please refer to the voice prompts and follow the actual
traffic laws in driving.
●When driving, the driver must not watch the display
of this unit….
Or the conditions at front of the vehicle may be neglected
that may result in traffic accidents.
●Please follow the actual traffic laws to drive when
using the navigation system as route guide or voice
prompt…
If you drive only as per the route guided by the navigation
system, you may violate the actual traffic laws that may
result in traffic accidents.
●Do not use the equipment for a long time when the
engine is off…
Or it will cause loss of electricity to the vehicle battery.
●Do not dismantle or modify this unit…
Or it may trigger accident, fire or electric shock.
●Do not use the unit under such failure conditions as
no display or no voice play…
Or it may trigger accident, fire or electric shock. Contact
NISSAN dealers.
●Stop using it immediately when there is any foreign
object, water spill, smoke or bad smell and contact
designated NISSAN dealers…
Continuous use may trigger accident, fire or electric
shock.
Caution
●The volume during driving shall be adjusted so that
the sound outside the vehicle can be heard.
Or it may cause accidents.
●Pay full attention to operating this unit while driving
so that safe driving is not affected…
Or it may affect driving and cause accidents.
●Do not use this unit for any purpose other than in
the vehicle…
Or it may result in injuries or accidents.
●Never continue to use the unit in accidents…
Cut off the unit power supply if smoke, abnormal noise
or smell is found.
●If the temperature inside the vehicle is high, use the
unit after the temperature is lowered …
Or it may result in failure.
●Do not exert force on the screen
Or it may result in failure.
●Please follow the actual road traffic lights to drive
when using the navigation
Map contents may not be completely accurate due to
traffic development. Please keep in touch with the NIS-
SAN Car dealers for timely update of map data.

with any other antenna or transmitter.
3
English
Warning
●Changes or modifications to this unit not expressly ap-
proved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE:
GThis equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
zConsult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Op-
eration is subject to the following two conditions :
●This device may not cause harmful interference, and
●This device must accept any interference received,
including interference that may cause undesired opera-
tion.
Radio
●The phenomenon of occasionally not receive radio sta-
tion broadcast, noises or crosstalk during driving may
be caused by road conditions, weather or environmen-
tal reasons.
USB
Not all USB memory devices are compatible with this unit
due to different USB memory device models.
Bluetooth
●Not all mobile phones are compatible with this unit due
to different mobile phone models and functions.
Disc
●In cold or rainy days, water droplets may form inside
the equipment as mist may condense on the window
glass.
●This (condensation) will result in distortion or failure in
playing. Please wait for a moment and use the equip-
ment after ventilation or dehumidification.
The device must not be co-located or operating in conjunction
To comply with FCC’s and Industry Canada’s RF radiation exposure limits for
general population/uncontrolled exposure,this device must be installed to provide
a separation distance of at least 20cm from all persons.”

4
English
can’t be used.
●No paper slip should be adhered to the playing side or
identification side of the disc or it will cause failure.
●Do not use any disc with crack or deformation, or it will
cause failure.
●Do not touch the playing side of the disc (which is the
smooth side with rainbow colours) when holding the
disc, or fingerprints will be left on the disc surface that
may cause skipping.
●Playing a stained disc may result in disc scratch or
skipping. Use disc cleaning agent available on the mar-
ket to remove the stains on the disc by wiping softly
from the inside to the outside.
■Use of New Disc
●When a new disc is used, there might be some burrs
at the inner edge and outer of the disc that shall be
removed with a ball pen or other means. Or the bur will
adhere to the playing side of the disc that may cause
skipping.
■Special- Shaped Disc
●Do not use any leased disc with glass film, lease label
or other adhesive. If such disc is played in the player, it
will be hard to get it out and may result in failure.
■Disc of Special Shape
●No disc in the shape of heart or octagon may be played
●In order to protect the internal structure of the player,
the player will stop playing automatically for protection
when something abnormal occurs during the playing.
If the machine can’t operate normally even if you oper-
ate as per the displayed instructions, the machine may
have malfunctions and you should contact NISSAN
dealers.
●Distortion may occur if the vehicle is driven on the road
of harsh conditions or is vibrated violently.
●MP3/WMA music files stored in CD-ROW/CD-R/CD-
RW may be played.
●Because of the characteristics, scratches, stains on the
CD/SACD/CD-ROM/CD-R/CD-RW disc or long-time
use inside the vehicle, the disc may not be played due
to the worsening disc performance. The disc mentioned
above can’t be played if it has been finally treated or
written in UDF format.
●Music CD should be officially identified.
●This unit does not support 8-cm disc.
●Do not use any disc with transparent or translucent
data reading side as it can’t be inserted, taken out or
played normally.
●Please do not use any disc that is not from the legiti-
mate manufacturer.
■Disc Storage
●Do not expose the disc to direct sunlight and make
sure to put it inside the box, or the disc will deform and

5
English
or the machine will be damaged. Do not use such kind
of discs.
■Disc Decoration
●Do not use any decoration to improve tone quality or
protect disc (such as disc case or protective case) as
the change in the thickness or dimension of the disc
may result in failure.
●Do not use any decoration to improve tone quality or
shockproof performance (such as disc ring case or
functional protective case), or the decoration may fall
inside the machine that the disc can’t be played or
taken out and result in failure.
LCD
●There will be brightened or darkened visual phenom-
enon if you watch the LCD from the sides.
●The screen will become illegible under direct sunlight
or external light on the display.
●If the machine is turned on when the temperature is
below zero, LCD will appear to be darker than usual
until the temperature inside the machine rises.
Names of Various Parts
Panel Buttons
2
4
1
3
5
6
7
8
!
9
@
0
1
LCD(touch screen): To display the working statuses of
various modes.
2
SD card slot: Map SD card.
3
[CAMERA] button: To enter camera mode.
4
[D]Next Track button: In SB/iPod/Bluetooth Audio De-
vice mode, short press it to select the next track to play,
and long press it to Fast Forward; in AM/FM mode, short
press to search radio station frequency up manually.
5
[A]Previous Track button: In USB/iPod/ Bluetooth
Audio Device mode, short press it to select the previous
track to play, and long press it to Fast Reverse; in AM/
FM mode, short press to search radio station frequency
down manually.
6
[BACK] button: Back to the previous mode.
7
[TUNE SCROLL] knob/[PUSH/SOUND] button: Rotate

6
English
to jump to previous or next touch key in the general
mode; press and rotate the knob to adjust the sound
effect or tone quality. Rotate to zoom in or out the map
in the map mode.
8 button/[VOL] knob: Rotate to adjust volume; short
press to turn off/on audio device.
9
[AUDIO]button: To enter audio selection screen or Audio
Mode.
0[]Day/night button: Press to switch between day or
night mode.
![MAP] button: Press to enter the map screen.
@[MENU] button: Press to enter Menu Screen to select
audio function or navigation function.
Caution
●It is prohibited to pull out the map SD card or the
system will not work.

7
English
Basic method of use
Switching the language
When the unit turns on, the default
language is set to English. Switch to
your language to use the unit.
1
Press [MENU] button on the panel.
2
Touch to enter Settings Screen.
3
Touch or slide the screen.
4
Touch .
5
Select the language and unit you
use.
Setting the time
1
Press [MENU] button on the panel.
2
Touch to enter Settings Screen.
3
Touch .
4
Set the clock you need.
Mode Switch
■Switch to navigation mode
Press [MAP] button on the panel to
switch to navigation mode for map
display.
■Switch to Bluetooth mobile
phone mode
Touch switch to Bluetooth
mobile phone mode.
■Switch to source mode
Press [AUDIO] button on the panel
or touch to switch to source mode
such as Radio mode.
Press [AUDIO] button or touch
in Source mode to switch
to source selection screen.

8
English
Basic Operations
Main menu operations
On main menu screen you can enter
corresponding work mode by touch
the icons on the screen.
1
Press [MENU] on the panel or
touch to enter main menu
screen.
zChange page by dragging left or
right or touch and .
Adjust Volume
1
Turn the [VOL] knob on the panel
to adjust the volume.
zSource mode: Adjust the volume of source.
zBluetooth Mobile Phone mode: Adjust the
incoming call ringtone volume when receiv-
ing a call, adjust the outgoing call ringtone
volume when making a call, or adjust the
call volume when speaking on the phone.
zMap navigation: Adjust Voice Guidance
volume when voice guidance interrupt.
zParking guidance: Adjust parking guid-
ance volume in parking guidance.
For example, turn the volume knob
in Source USB mode to adjust the
volume as shown below.
zTurn the knob clockwise: volume up.
zTurn the knob counter clock-
wise: volume down.
Audio On/Off
When the radio or media player is
ON, you can turn off the
Audio device.
1
Short press [ ] button to turn off
Audio.
2
Short press [ ] button again to
resume playing.
Day/Night Display Mode
Switch
This can switch the screen display
mode.
1
Press [ ] button on the panel to
to switch between day and night.
Basic Settings
1
Press [MENU] button on the
panel.
2
Touch to enter Settings Screen.

9
English
Bluetooth Settings
Pair Bluetooth Mobile Phone or Blue-
tooth Audio Device / check the list of
paired equipment/Set Bluetooth
system of this unit.
NOTE:
*Pairing method of some mobile phones or
audio devices may differ or fail for Bluetooth
pairing due to different types of mobile
phones and audio devices.
1
Touch to enter
Bluetooth setting screen.
zWhen there is no Bluetooth pairing equip-
ment record, the items “Connect with Blue-
tooth” and “Select Device” will be invalid.
2
Touch to turn Bluetooth
On or Off.
3
Touch to Select the
mobile phone or audio device to
connect. You can operate as per
the information prompted.
4
Touch to view and
select BT Device.
5
Touch to edit
Bluetooth information.
Phone settings
You can confirm and view various
information concerning about the
Bluetooth phone.
Note:
Before setting phone you need to
pair the mobile phone with this unit.
1
Touch to enter
Phone setting screen.
2
Touch to edit and delete
Quick Dial number.
3
Touch to view Call
History records.
4
Touch to download
Phonebook.
5
Touch to set Volume.
6
Touch to turn the
Auto Downloaded on or off.
Audio Settings
To set various sound effects.
1
Touch to enter
Audio setting screen.

10
English
2
Touch , , , , or to
adjust the tone quality.
Display Adjustment
Adjust the display effect of the
screen.
1
Touch to enter
Display Adjustment screen.
2
Touch , the screen display
can be switched off to enter power
save mode.
zAfter the screen display is OFF, the buttons
on the panel are still operational. Press
[] button on the panel will resume
the previous source play screen or map
navigation screen. Or you can press any
button for the corresponding operation.
3
Touch to enter brightness
adjustment screen.
zTouch or to adjust the
brightness of display.
4
Touch to enter contrast
adjustment screen.
zTouch or to adjust
the contrast of display.
5
Touch to enter back-
ground colour adjustment screen.
zTouch or to change
the background colour.
Volume and Beeps
Adjust the Audio volume/Guidance
volume/ Ringtone/ Incoming Call/
outgoing Call/NissanConnect Svcs,
turn On or Off the button beeps and
guidance voice.
1
Touch to enter
Volume & Beeps screen.

11
English
Next page
2
Touch or to adjust the vol-
ume.
3
Touch to turn on or off
button beeps.
4
Touch to turn on or off
guidance voice .
Edit menu
1
Touch to enter
Edit menu screen.
2
Touch to delete the quick
menu.
3
Touch to add the quick menu.
4
Touch the quick menu to rear-
range it.
5
Touch to save the settings.
Voice Recognition settings
1
Touch to enter
Voice Recognition settings screen.
2
Touch to turn on or
off Minimize Voice Feedback.
3
Touch to enter
the Audio device setting screen
and you can activate the device
by pressing “Yes” on the pop-up
screen displayed upon connecting
the media device.
Apple CarPlay settings
The connected device supports Ap-
ple CarPlay. Once Apple CarPlay
is started, some NissanConnect
features will be replaced or disabled
by CarPlay including : NissanCon-
nect Apps, iPod on USB Hands Free
phone, Bluetooth Audio and naviga-
tion guidance on the Vehicle Informa-
tion Display.
1
Touch to enter
Apple CarPlay settings screen.
2
Touch to turn on
or off Always Start Apple CarPlay.
Turn on: the connected iPhone
supports Apple CarPlay. When you
connect an iPhone you can start
Apple CarPlay by pressing “Yes”
on the pop-up screen displayed.
Turn off: the connected iPhone
only supports iPod.
3
Touch to

12
English
displays Apple CarPlay Help infor-
mation.
Source Media Mode
1
Press [AUDIO] button on the panel
or touch to enter source
screen.
FM/AM mode
1
Touch / to enter FM/AM
screen.
1
2
3
1
Back to source screen.
2
View station list, RDS Info and
turn on or off HD radio mode.
3Preset channel list(Station list). Up
to 12 channels can be saved.
SXM mode
Before to enter this mode you need
to check the antenna.
1
Touch to enter SiriusXM
screen.
12345
9
0
8
7
6
1
Channel category.
2
Channel name.
3
Artist name.
4
Song title.
5
Save the favorite channel by artist
or song alert.
6
Preset channel list(Station list).
Up to 18 channels can be
saved.
7
Switch the play mode between
replay and live.
8
SiriusXM signal intensity.
9
View track list by kinds of
categories etc.
0Back to source screen.
USB mode
1
Touch to enter USB audio
screen when you connect a USB.
1
2
34567
1Back to source screen.
2Select the folder and track, turn on
or off the display of album artwork.
3Turn on or off repeat play.
4Short touch: switch to Previous
Track; Long touch: Fast Backward.
5Touch to Play/Pause
6Short touch: switch to next Track;

13
English
Long touch: Fast Forward.
7Turn on or off shuffle play.
iPod mode
1
Touch to enter iPod audio
screen when you connect an iPod.
1
2
34567
1Back to source screen.
2Select the track from playlist, art-
ists, albums, songs, podcasts,
genres, composers and audio-
books; Turn on or off the Display
of Album Artwork.
3Turn on or off repeat play.
4Short touch: switch to Previous
Track; Long touch: Fast Backward.
5Touch to Play/Pause
6Short touch: switch to next Track;
Long touch: Fast Forward.
7Turn on or off shuffle play.
Bluetooth Audio mode
Before playing Bluetooth Audio you
need to pair the audio device with
this unit.
1
Touch to enter Bluetooth
Audio screen.
1
2
34567
1Back to source screen.
2
View track list and select a track
to play it; enter the bluetooth
settings screen.
3Turn on or off repeat play.
4Short touch: switch to Previous
Track; Long touch: Fast Backward.
5Touch to Play/Pause
6Short touch: switch to next Track;
Long touch: Fast Forward.
7Turn on or off shuffle play.
AUX mode
Insert the external sound device into
AUX slot via the audio cable.
1
Touch to enter AUX mode.
2
Choose “Low”, “Middle” or “High”
input sense of auxiliary device.
Bluetooth Operation
Pair Bluetooth Device
1
Touch to select the
mobile phone or audio device to
pair.

14
English
2
If you want to select the mobile
phone 秋to pair, touch .
3
If you want to select the audio
device秋to pair, touch , and
you have to edit the PIN (minimum
4 digits and maximum 16 digits) to
pair the audio device.
4
After entering the PIN, touch
and operate as per the information
prompted.
5
After successful pairing, it will
automatically return to Bluetooth
Setting screen.
Bluetooth Telephone
1
Touch to enter Phone screen.
2
Touch to edit and
delete Quick Dial number.
3
Touch to view
Phonebook.
4
Touch to view Call
History records.
5
Touch to dial phone
number by keypad.
6
Touch to view text
message.
7
Touch to connect a
phone with this unit.
8
Touch to select
paired phone.
9
Touch to set Volume.

15
English
Navigation
Menu Types and Operation
■Map menu (Menu on current
location map)
Touch on the map screen to
display the Map menu at the left side
of the screen. You can store the cur-
rent location to the Address Book or
change the map appearance.
5
1
2
3
4
1
[BACK] key:Return to the map
screen.
2
[Save Location] key:Save the cur-
rent location in the AddressBook.
3
[Nearby POIs] key:Displays the
Category screen of the POIs
nearby the current location.
4
[Map View] key: Change the types
of the screen and map appear-
ance.
5
[Map Icons] key: Turn on or off the
map icons.
■Location menu (Menu on
scrolled map)
After scrolling the map by touching
the Map screen, touch on the
screen to display the Location menu
at the left side of the screen. You
can set the location under the cur-
sor at the centre of the screen as the
destination or store it to the Address
Book.
5
1
2
3
4
1
[BACK] key: Returns to the
scrolled Map screen before
touching the key.
2
[New Destination] key:Sets the
location under the cursor as the
destination. When a destination
is already set, the old destination
is cancelled as soon as the new
destination is set.
3
[Add to Route] key:When another
location is already set as the des-
tination, you can set the location
under the cursor as a waypoint.
Touching this key displays the Edit
Route screen. Specify the desired
order of passing to set the loca-
tion as a waypoint.
4
[Nearby POIs]] key: Displays the
Category screen of the POIs
nearby the location under the
cursor.
5
[Save Location] key:Save the
location under the cursor in the
Address Book.
Map Screen Features
■Types of the map
There are two types of map: the 2D
map and the 3D map. Such as the
method of scrolling the map, some
operation are different depending on
the map types.
●2D Map

16
English
The 2D map is a map screen repre-
sented to the plane just like the map
of atlases. It is suitable for searching
a destination and confirming the road
or route.
●3D Map
The 3D map is a map screen using
a viewing position above the vehicle
while looking in the direction of the
car heading. It is suitable for under-
standing the image of the direction,
because the perspective of the trav-
elling direction can be adjusted as
required.
■Indicators on the map
Indicators displayed on the Map
screen are different according to the
conditions at that time.This section
explains the main indicators dis-
played on the Map.
Indicators on the map of the current
location
1
3
2
3
4
1
Audio mark: Indicates the current
source mode.
2
Vehicle mark:Indicates the current
location and direction of your
vehicle.
3
[ ]Map Menu key:Displays the
Map menu.
4
[ ]Map scale key: Touch this
key to decreases/increases the
map scale.
5
[ ]Map bearing mark:Indicates
the map orientation. You can
switch the map orientation
between Heading Up, North Up
and 3D map by touching this icon.
Indicators on the scrolled map
Indicators are displayed after scroll-
ing the map. During scrolling, only
the scroll cursor is
displayed on the map.
1
2
3
1
[ ] (Slow Scroll)key: Displayed
only on the 2D map. Turn on the
Slow scroll mode. Scroll cursor:
Displayed when scrolling the map.
2
Displays the name of the street
under the cursor.
Indicators displayed during the route
guidance mode
After a destination is set and travel-

17
English
ling is started, the guidance route
and various guidance information are
displayed on the map.
1
3
2
1
Small Turn Arrow display:Displays
the turning direction and distance
to the next guidance point.
2
Guidance point:Indicates the
guidance point
3
Distance to the waypoint/
destination:The distance from the
current location to the next way-
point or destination are displayed.
Manipulating the Map Screen
■Scrolling the map
Touching the Map screen displays
a cursor at the centre of the screen,
and you can scroll the map. For the
2D map, touch the map to move the
map to the touched position, and
keep touching the map to scroll the
map towards the touched direction.
For the 3D map, touch the upper part
of the map to scroll the map toward
the touched direction, and touch the
left or right part to rotate the map
while touching.
■Slow scroll mode operation
Touch while scrolling the 2D map
to display the following screen:
Keep touching the desired arrow key
(, , , , , , , .) moves
the map slowly towards the corre-
sponding direction. To quit the slow
scroll mode, touch .
■Zooming IN/OUT the map
1
Touch to display the zoom in/
out key.
2
Touch or to change the
map scale.
■Changing the map appearance
The Map screen can be adjusted
regarding orientation or appearance
of the map.
1
Touch on the Map screen of
the current vehicle location.
2
Touch to enter Map
View screen.

18
English
zTouch the corresponding key
to change the map view.
3
Touch to display the
View Settings screen.
z[Intersection]:During the route guid-
ance mode, displays the Intersection
Close-up display which displays the
turning direction of the next guidance
junction at the left of the screen.
z[Turn List]:During the route guidance
mode, displays the list of the name, dis-
tance, and turning direction of the guid-
ance junctions at the left of the screen.
z[Drive Report]:During the route guid-
ance mode, displays the Drive Report.
z[Full Map]:Changes to display
one map using full screen.
Screen examples
• 2D Map
• 3D Map
2D/2D Map
2D/3D Map
4
Touch to enter Map
Settings screen.
●[Map Orientation] key: Changes
the orientation of the map between
Heading Up and North Up.

19
English
zThis control is available
when [2D] is selected.
●[Long Range] key: Changes the
map view to view a wider area in
the direction that the vehicle is
travelling. When this feature is ac-
tivated, the vehicle mark is located
slightly lower than the centre of the
screen.
zThis control is available when [2D]
is selected and the Map Orienta-
tion is set to Heading-Up.
●[Map Colour] key:Selects the
colours(Map Colour 1/2/3/4) of the
map.
●[Map Text Size] key: Change
the map text size(Large,
Medium,Small).
●[Birdview Angle] key: Changes the
angle of the 3D map. Touch to
raise the angle, and to lower
the angle.
zThis control is available
when [3D] is selected.
●[North Up when Zoomed Out]
key: Turn on or off north up when
zoomed.
●[Names Displayed on Map] key:
Change the names of place, facil-
ity and road displayed on map.
●[Left Split Map Settings] key:
Change settings of Map Orienta-
tion, Long Range and Map Scale
of left split map.
●[Show all Freeway Exits on Route]
key: Turn on to show all freeway
exits on route.
●[Auto. Show Turn List on Freeway]
key: Turn on to show turn list on
freeway.
Navigation System
Settings
1
Press [MENU]/[MAP]/[AUDIO]
button on the panel to display the
function bar.
2
Touch , to enter
Navigation Settings Screen.
Registering/Editing the
Address Book
From the Address Book, you can
register the home address, address-
es of facilities and places, routes,
and Avoid Areas. You can also edit
the data registered.
The registered places or routes can
be set as the destination or as the
current route.