Clarion CZ101 Safety guide

Owner's manual &Installation manual
Mode d'emploi et mantlel d'll stal!ation
Manual de instrucciones yde instalaci6n
CZ101
CD/MP3IWMA RECEIVER
LECTEUR CO/r1l1P3/'NMA
RECEPTOR CD/MP3IWMA

CLARION PRODUCT REGISTRATION INFORMATION
For USA and Canada only
www.clarion.com
Dear Customer:
Congratulations on your purchase of aClarion mobile electronic products.
We are confident
that you'll enjoy your Clarion experience.
There are many benefits to registering your product.
We invite you to visit our website at
www.clarion.com to register your Clarion product.
We have made product registration simple with our easy to use website. The registration form
is short and easy to complete. Once you're registered, we can keep
you informed of important
product information.
Register at
www.clarlon.com -it's easy to keep your Clarion product up to date.
INFORMATIONS DE L'ENREG/STREMENT DE PRODUITS CLARION
Pour les Etas Unis et Ie Canada seulement
www.clarion.com
Cher client:
Nous vous remercions d'avoir achete ce produit electronique mobile Clarion. Nous sommes
confiants que vous apprecierez votre experience Clarion.
II y a beaucoup d'avantage aenregistrer votre produits. Nous vous invitons avisiter notre site
Web www.clarlon.com pour enregistrer votre produit Clarion.
Nous avons facilite la tache d'enregistrement de produit simple et facile grace anotre site Web.
Le formulaire d'enregistrement est court et facile acompleter. Lorsque vous etes enregistrer,
nous pouvons vous tenir ihforme des informations important de produits.
Enregistrer a
www.clarion.com -c'est facile de mettre ajour votre produit Clarion.
INFORMACION DEL REGiSTRODE~PiiODlicTOTDECLARJO~-~:=l'·
Para USA y Canada nomas
www.clarion.com
Querido Cliente:
Felicitaciones por
su compra de producto electronico movil de Clarion. Estamos seguros que
usted gozara de
su experiencia con el producto de Clarion.
Hay muchas ventajas al registrar su producto. Le invitamos aque vi site nuestro sitio en internet
www.clarlon.com para registrar su producto de Clarion. !
Hemos hecho el registro de producto facil en nuestro sitio. La forma de registro es corta yfacil J
de completar. Una vez que 10 registre, podremos proporcionarle la informacion de su producto. .
Registrese
en www.clarion.com -es facil mantener su producto de Clarion actualizado.
-~~-~=-=~='===~===:~='~'.='.'=~~~~~=='~="=='~'===~~~-~~-,.~=."
1 CZ101

Contents
Thank you for purchasing this Clarion product.
•Please fully read this owner's manual before operating this equipment.
•Check the contents of the enclosed warranty card and store it
in asafe place with this manual.
1. FEATURES 3
2. PRECAUTIONS 4
Front Panel IGeneralities 5
Remove the
DC P 6
Attach the DCP 6
3. CONTROLS 7
Operational Panel 7
Names
of Buttons 7
Remote Control ; 8
Notes of remote control using 8
4. CAUTIONS ON HANDLING 9
Handling Discs 9
5. OPERATIONS 10
Basic Operations 10
System Setup
11
Audio Setup 11
Radio Operations 12
CD/MP3/WMA Operations
13
AUX Operations 15
6. TROUBLE SHOOTING
16
7. ERROR DiSPLAyS 17
8. SPECIFICATIONS 18
9. INSTALLATION IWIRE CONNECTION GUIDE 19
CZ101 2

1. 'FEATURES
•MP3IWMA compatible with ID3-TAG display
•Detachable Front Panel with 3.5mm AuxiliaryInput
•2ch/2VRCA Output with Subwoofer Control
and BEAT-EQ with 3Band Parametric
Equalizer
[Q]m~~rn3
DIGITAL AUDIO
Expanding Systems
Expanding audio features
2Channel Amplifier
I MP3/WMAI
Note:
The items listed outside of the frames are
the commercialproductsgenerally
sold
3 CZ101
Portable Player
(Connect by AUX
IN Jack)

2. PRECAUTIONS
AWARNING
For your safety, the driver should not operate the controls while driving.
Also, while driving, keep the volume to a level at which external sounds can be heard.
1. When the inside of the car is very cold and
the player
is used soon after switching
on the heater, moisture may form on the
disc or the optical parts of the player and
proper playback may not be possible.
If moisture forms
on the disc, wipe it off
with asoft cloth. If moisture forms on
the optical parts of the player, do not
use the player for about one hour. The
condensation will disappear naturally
allowing normal operation.
2. Driving on extremely bumpy roads which
cause severe vibration may cause the
sound to skip.
3. This unit uses aprecision mechanism.
Even
in the event that trouble arises,
never open the case, disassemble the
unit, or lubricate the rotating parts.
4. This equipment has been tested and found
to comply with the limits
for aClass B
digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in aresidential installation.
This equipment generates, users, and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in aparticular
installation. If this equipment does cause
harmful interference to radio reception,
which can be determined by turning
the equipment off and on, the user is
encouraged to consult the dealer or an
experienced radio technician for help.
lOOllB.
CZ101
clarion
12Ve GROUND=15A max
AM
530-1710kHz FM 87.9-107.9MHz
THIS DEVICE C0t.4f'LIES WITH PART 15 OF THE FCC RUlES.
OPERATION IS SUBJECT TO TtlE FOUOWlNG TWO CONDITIONS:
(1 )THIS DEVICE MAY NOT CAUSE HARMFULINTERFERENCE. AND
(2)THIS DEVICE MUST A.CCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNOESIRED
OPERATION.
THIS DEVICE COMPLIES WITH DHHS RULES 21 eFR CHAPTER I
SUeCHAPTER JAPPLICABLE
AT DATE OF MANUFACTURE.
This product Includes technology
owned by Microsoft Corporation and
cannot be used
Of dIstributed without alicense from MSLGP.
ClARION CO.,LTD.
7·2.SHINTOSHIN,CHUQ..KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN
MANUFACTURED: URF
SERIAL No.
c.=.======~
@
.. c:t'~~
TX·10$2ll-A PN:12107OOONrt
\\
t---
-
II
IINFORMATION FOR USERS:
Changes or modifications to this product
unapproved by the manufacturer will void the
warranty and will violate FCC approval.
CZ101 4

Front Panel/Generalities
For alonger service life, be sure to read the
following cautions.
•Do not allow any liquids on the set from
drinks, umbrellas, etc. Doing
so may
damage the internal circuitry.
•Do not disassemble or modify the set
in
any way. Doing so may result in damage.
•Do not let cigarettes burn the display.
Doing so may damage or deform the
body.
•If aproblem should occur, have the set
inspected at your store of purchase.
•The remote control unit may not work if
the remote control sensor is exposed
to
direct sunlight.
Cleaning the body
•Use asoft, dry cloth and gently wipe off
the dirt.
•For tough dirt, apply some neutral
detergent diluted
in water to asoft cloth,
wipe off the dirt gently, then wipe again
with adry cloth.
•Do not use benzene, thinner, car cleaner,
etc., as these substances may damage
the body
or cause the paint to peel. Also,
leaVing rubber or plastic products
in
contact with the body for long periods of
time may cause stains.
5 CZ101

Remove the DCP
The control panel can be detached to prevent
theft. When detaching the control panel, keep
it in the safety place and prevent scratches.
We recommend taking the DCP
(DETACHABLE CONTROL PANEL) with you
when leaving the car.
1. Press the [SRC I(!) ]button (2 sec.) to turn
off the power.
2. Deeply push in [OPEN] button to unlock
the DCP.
3. Hold the side popped out, remove the
DCP.
Attach the DCP
1. Hold the DCP and ensure that the panel
faces towards you. Set the right side of the
DCP into the DCP bracket.
2. Press the left side of the DCP until it locks.
ACAUTION
•The DCP can easily be damaged by shocks. After removing it, be carefully not to drop it or
subject it to strong shocks.
•Once the [OPEN] button is pressed and DCP is unlocked, car vibrations can cause the DCP
to fall.
•The connector for the main unit and DCP is extremely important. Be careful not to damage it
by pressing on it with fingernails, screwdrivers, etc.
Note:
If the DCP is dirty, wipe off the dirt with asoft, dry cloth only.
CZ101 6

3. CONTROLS
Operational Panel
[MENU] [PS/AS] Disc Slot
[I+l ,
~] [OPEN] [BAND] [VOLUME] [1-6] AUX
Jack
[SRC/<.!.>]
Names of Buttons
[SOUND] [ISR] [0]
[SRC I(!) ]Button
• Power /Toggle the audio source
[BAND] Button
•Select tuner band
[MENU] Button
•MP3IWMA mode -Search function.
•CD mode -No function.
•RADIO mode -No function.
•AUX mode -No function.
[~] Button
•Press to eject disc.
[I+lI ,
~ ] Buttons
•Previous/Next Search
[Open] Button
•Unlock the front panel.
[PS IAS] Button
•Scan play /Preset scan
•Auto
memory store (long press)
[SOUND] Button
•Sound effect setting
7 CZ101
[VOLUME] Knob
•Adjust volume level/Confirm (press)
[ISR] Button
•Recall ISR station stored in memory and
store current station in ISR
memory (long
press)
[1-6] Buttons
•[1] Button: Scan play /Preset station 1.
•[2] Button: Repeat play /Preset station 2.
•[3] Button: Random play /Preset station 3.
•[4] Button:
Play / Pause / Top play (long
press) /Preset station 4.
•[5] Button: Previous folder /Preset station
5.
10 tracks down (long press)
•[6] Button: Next folder /Preset station 6.
10 tracks up (long press)
[D] Button
•Display switch
•System setup (long press)

Remote Control
[SRC] Button
•Toggle the audio source
•Power on /Power off (long press)
[ ~ , »f ]Buttons
•Preset station up/down
•Previous /next track
•Search (long press)
[RPT) Button
•Repeat play
[MUTE] Button
•Mute the volume
[DISP] Button
•Display switch
SRC
BND
[POWER! [BNOITOP]
SRC]
.. ow ..
PIKUl'
•
TOP
[.,y]
[-, -]
[.11 ]
[ISR]
[MUTE] [OISP]
MUTE ISR DISP
[SCN! [ROM]
PSlAS]
[RPn
[SCN/PS/AS] Button
•Scan play IPreset scan
•Auto memory store (long press)
[ ~II ]Button
•Play /Pause
[ISR] Button
• RecalliSR station stored in memory
and store current station in ISR
memory (long press)
[ A , .... ]Buttons
•Volume up /down
[BNDITOP] Button
•Select tuner band
•Top play (long press)
[ROM] Button
•Random play
Notes of remote control using
1. Aim the remote control at the remote sensor
on the unit.
2. Remove the battery from the remote control
or insert abattery insulator if the battery has
not been used for amonth or longer.
3. DO NOT store the remote control under
direct sunlight or in high temperature
environment, or it may not function properly.
4. Use "button shaped" lithium battery "CR2025"
(3V) only.
5. DO NOT sUbject battery to recharge,
disassemble, heat or dispose in fire or water.
6. Insert the battery in proper direction
according to the (+) and (-) polarities.
7. Store the battery in aplace where children
cannot reach to avoid the risk of accident.
Inserting the Battery
1. Slide remote control unit's rear cover in the
direction shown.
2.
Insert battery (CR2025) into insertion
gUides with printed side (+) up.
3. Press battery into compartment as shown.
4. Replace and slide cover until it clicks into
place.
CZ101 8

4. CAUTIONS ON HANDLING
Handling Discs
Handling
•New discs may have some roughness
around the edges. If such discs are used,
the player may not work or the sound
may skip. Use aball-point pen
or the like
to remove any roughness from the edge
of the disc.
Ball-point pen
~
~G~
/ !
I.:
•Never stick labels on the surface of the
disc or mark the surface with apencil or
pen.
•Never
playa disc with any cellophane
tape or other glue
on it or with peeling off
marks. If you try to play such adisc, you
may not be able to get it back out of the
player or it may damage the player.
•
Do not use discs that have large
scratches, are misshapen, cracked, etc.
Use of such discs may cause
misoperation or damage.
•To remove adisc from its storage case,
press down on the center of the case and
lift the disc out, holding it carefully by the
edges.
•
Do not use commercially available disc
protection sheets or discs equipped with
stabilizers, etc. These may damage the
disc or cause breakdown of the internal
mechanism.
9 CZ101
Storage
•Do not expose discs to direct sunlight or
any heat source.
•Do not expose discs to excess humidity
or dust.
•Do not expose discs to direct heat from
heaters.
Cleaning
•To remove fingermarks and dust, use a
soft cloth and wipe
in astraight line from
the center of the disc to the
circumference.
•Do not use any solvents, such as
commercially available cleaners,
anti-static spray,
or thinner to clean discs.
•After using special disc cleaner, let the
disc dry off well before playing
it.
On Discs
•Never turn off the power and remove the
unit from the car with adisc loaded.
ACAUTION
For your safety, the driver should not insert
or eject adisc while driving.

5. OPERATIONS
Basic Operations
Note:
•Refer to the diagrams in "3. CONTROLS"
when reading this chapter.
ACAUTION
When the unit is turned on, starting and
stopping the engine with its volume
raised to the maximum level may harm
your hearings.
Be careful about adjusting the volume.
Poweron / off
Notes:
•Start the engine before using this unit.
•Be careful about using this unit for along
time without running the engine. If you
drain the car's battery too far, you may not
be able
to start the engine and this can
reduce the service life
of the battery.
1. Start the engine. The power button /knob
illumination on the unit will light up.
~ EngineON
\.?WJ position
2. Press the [SRC I <!> ]button on the front
panel or the remote control to turn on the
power under standby mode. The unit goes
back to the last status after power on.
3. Press and hold the [SRC I <!> ]button on
the front panel
or the remote control to
turn off the power.
Mute
Press the [MUTE] button on the remote
control to mute the volume from the unit.
Note. .
Doing the operation above again or adjusting
volume will release muting.
Volume adjustment
Turn the [VOLUME] knob on the front panel
or press the [
.... , 'Y ]buttons on the remote
control.
The adjustable range
of volume is 0 to 40.
ACAUTION·
While driving, keep the volume level at
which external sounds can be heard.
PM~ngsourceselecUon
Press [SRC I <!> ]button on the front panel
and remote control repeatedly to choose
desired playing source.
Notes:
Playing source selection means selecting
work mode, such as DISC mode, RADIO
mode and AUX mode.
Displaysystem time
Press the [0] button on the front panel or
[DISP] button on the remote control to switch
the display information, system time and
playing source.
RESET
Note:
*When the [RESET] button is pressed,
frequencies
of radio stations, titles, etc.
stored
in memory are cleared.
RESET
CZ101 10

System Setup
At all mode, press and hold [D] button to
enter system setup. Press [ ~ , ~] buttons
to select options, rotate the [VOLUME] knob
to adjust.
CLOCK
Press the [VOLUME] knob to enter clock
setting mode, rotate the [VOLUME] knob
to set clock, press [ ~ ] or [ ~ ]button to
select hour or minute, press and hold the
[VOLUME] knob to confirm.
DXlLO (RADIO mode)
Rotate the [VOLUME] knob to choose radio
local
or distant at RADIO mode.
•LO: Only stations with strong signal can be
received.
• DX: Stations with strong and weak signals
can
be received.
AUX SENS (AUX mode)
Rotate the [VOLUME] knob to choose AUX
Input sensitivity LOW, MID or HIGH at AUX
mode.
SCRN SVR: ON/OFF
Rotate the [VOLUME] knob to choose SCRN
SVR (screen saver) ON
or OFF.
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When
SCROLL is ON, the LCD will display
103 TAG information cyclely, e.g: TRACK-
>FO LDE R->F I LE->ALB UM-> TITLE-
>ARTIST-> TRACK-> ...
When
SCROLL is OFF, the LCD will display
one of the 103 TAG information, the default
Audio Setup
Press the [SOUND] button to enter sound
effect setting mode. First press shows current
Ea. Rotate the [VOLUME] knob to changes
BEAT EO in this order:
OFF ->
B-BOOST -> IMPACT -> EXCITE ->
CUSTOM
Press the [SOUND] button, then press [
~ ,
~] buttons to select USER preset including:
is TRACK, but user can adjust it to other 103
TAG information by press [BAND] button.
DIMMER: ON/OFF
Rotate the [VOLUME] knob to choose
DIMMER ON or OFF.
•ON: LCD dimmer is active when small light
of vehicle is turned ON.
•OFF: LCD always maximum brightness
regardless of the vehicle small light.
REARlS-W
Rotate the [VOLUME] knob to choose REAR
or S-WOOFER (SUB-WOOFER).
TEL-SW
Rotate the [VOLUME] knob to choose MUTE,
ON or OFF.
•MUTE:
The sound from this unit is muted during
telephone calls.
•OFF:
This unit continues normal operation even
when the cellular phone is used.
•ON:
You can listen to your telephone calls from
the speakers connected to this unit.
*
When listening to your calls on your car
speakers, you can adjust the volume by
turning the [VOLUME] knob.
BEEP: ON/OFF
Rotate the [VOLUME] knob to choose button
beep sound
ON or OFF.
12124H
Rotate the [VOLUME] knob to choose time
format: 12 or 24 hour.
BALANCE -> FADER -> M-B EX -> LPF(low
pass filter) ->
SoW VOL (Subwoofer Volume),
rotate the [VOLUME] knob to select avalue.
BALANCE:LEFT 1-7->CENTER->RIGHT 1-7
FADER:FRONT 1-7->CENTER->REAR 1-7
M-BEX: ON/OFF
LPF:
THROUGHl80/120/160
SUBW VOL: (-6)-(+6)
11 CZ101

Radio Op_e~_a_t,_·o_n_s _
Select tuneras playing source
Press [SRC I <!>] button once or more to
enter RADIO mode.
Select one radio band
Press the [BAND] button on the panel or on
the remote control to select one radio band
among FM1, FM2, FM3 and AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [
~ ] or [ ~] buttons on the panel
to tune in ahigher/lower station.
Auto tuning
Press and hold the [ ~ ] / [ ~] buttons on
the panel
or remote control to seek ahigher/
lower station.
To stop searching, repeat the operation
above
or press other buttons having radio
functions.
Note:
When astation is received, searching stops
and the station is played.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for adesired station
in memory.
1. Press the [PS/AS] button.
2. When adesired station is tuned in, press
the [PS/AS] button again to continue
receiving that station.
Note:
Be careful not to press and hold the [PS/AS]
button for 2seconds or longer, otherwise the
auto store function will begin and the unit
starts storing stations.
Auto store
Only stations with sufficient signal strength
will be detected and stored in the memory.
Press and hold the [PS/AS] button (2 sec.) to
start automatic station search.
To stop auto store, press other buttons
having radio functions.
Notes:
1. After auto store, the previous stored
stations will be overwritten.
2.
The unit has 4bands, such as FM 1, FM2,
FM3 and AM. FM3 and AM can store
by AS function. Each bands can store 6
stations, CZ101 can store 24 stations in
total.
Manual store
When one expected radio station has been
detected, press and hold
number button 1-6
to store it in the memory.
Recall the storedstations
Press one numeric button among 1to 6on
the panel to select the corresponding stored
station.
Localseeking
When LOCAL seeking is on, only those radio
stations with strong radio signal could be
received.
To open or close LOCAL function, press and
hold the [0] button on the front panel, then
press [
~] button repeatedly until LO or OX
displays on the screen, rotate the [VOLUME]
knob to select Local or Distant mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode
ison.
CZ101 12

CDIMP3IWMA Operations
This unit can playback MP3IWMA
files
Notes:
• If you playa WMA file with active DRM
(Digital Rights Management), no audio is
output.
To disable DRM
(Digital Rights Management)
When using Windows Media Player 9/10/11,
click on TOOL -> OPTIONS -> COPY MUSIC
tab, then
under COPY SETTINGS, unclick
the Check box for COPY PROTECT MUSIC.
Then, reconstruct files.
Personally constructed
WMA files are used
at your own responsibility.
Precautions when creating MP3I
WMA file
Usable sampling rates and bit rates
1. MP3: Sampling rate 8kHz-48 kHz, Bit rate
8kbps-320 kbps1VBR
2. WMA: Bit rate 8kbps-320 kbps
File extensions
1. Always add afile extension ".MP3", ".WMA"
to
MP3, WMA file by using single byte
letters. If you add afile extension other than
specified
or forget to add the file extension
the file cannot be played. '
2. Files without MP3/WMA data will not play.
The files will be played soundlessly if you
attempt to play files without MP3/WMA
data.
*When VBR files are played, the play time
display may differ the play location.
*When MP3/WMA files are played, alittle
no sound part is caused between tunes.
Logical format (File system)
1. When writing MP3/WMA file on a CD-R
disc or CD-RW disc, please select
"IS09660 level 1,2 or JOLIET or ROMEO"
or APPLE ISO as the writing software
format. Normal play may not be possible if
the disc is recorded on another format.
2. The folder name and file name can be
displayed
as the title during MP3/WMA play
but the title must be within 32 single byte
alphabetical letters and numerals (including
an extension).
3. Do not affix aname to afile inside afolder
having the same name.
Folder structure
A disc with a folder having more than 8
hierarchical levels will be impossible.
Number of files or folders
1. Up to 999 files can be recognized per
folder.
Up to 999 files can be played.
2. Tracks are played in the order that they
were recorded onto adisc. (Tracks may not
always be played
in the order displayed on
the PC.)
3. Some noise may occur depending on
the type of
encoder software used while
recording.
Eject function
Just pressing the [~] button, ejects the disc.
Notes:
• If you force a CD into before auto
reloading, this can damage the CD.
• If a CD (12 em) is left ejected for 15
seconds, the CD is automatically reloaded
(Auto reload).
Listening to adisc already loaded
in the unit
Press the [SRC I <!)] button to select the COl
MP3/WMA mode.
When the unit enters the CD/MP3/WMA
mode, play starts automatically.
LoadingaCD
Insert a CD into the center of the CD
SLOT with label facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD
SLOT.
•If the
CD is not inserted easily, there may
be
another CD in the mechanism or the
unit may require service.
•Discs
without the rQ]fi or ~ mark and
OIOlTALI'Il.VIO ~
13 CZ101

CDIMP3IWMA Operations
CD-ROMs cannot be played by this unit.
•
Some CD-R/CD-RW discs may not be
usable.
Pausing play
1. Press the [ 4 ] button to pause play.
"PAUSE" appears in the display.
2. To resume CD play, press the [ 4] button
again.
Displaying CD titles
This unit can display title data for MP3/WMA
disc.
When SCROLL is OFF, each time you press
the [BAND] button to change the title display.
MP3IWMA disc
Track -> Folder -> File title -> Album -> Title
-> Artist -> Track .. ,
Notes:
•If MP3/WMA disc is not input TAG, "NO
TITLE" appears in the display.
•Only ASCII characters can be displayed
in
Tags.
Selectingatrack
Track-up
1. Press the [ H>I ] button to move to the
beginning of the next track.
2. Each time you press the [ H>I] button, the
track advances to the beginning of the next
track.
3. For MP3/WMA disc, press and hold the
[6] button (2 sec.) to move ahead to +10
tracks.
Track-down
1. Press the [I+lI ]button to move back to the
beginning of the current track.
2. Press the [ 1+lI] button twice to move back
to the beginning of the previous track.
3. For MP3/WMA disc, press and hold the [5]
button
(2 sec.) to move back to -10 tracks.
Fast-forward/Fast-reverse
Fast-forward
Press and hold the [H>I] button.
Fast-reverse
Press and hold the [ 1+lI] button.
*For MP3/WMA discs, it takes some time
until the start of searching and between
tracks. In addition, some error may occur in
the play time.
FolderSelect
This function allows you to select afolder
containing MP3/WMA files and start playing
from the first track in the folder.
1. Press the [ 5 ] or [ 6] button.
Press the [6 ] button to move the next
folder. Press the [5 ] button to move the
previous folder.
2. To select atrack, press the [ 1+lI] or [ H>I]
button.
Top function
The top function resets the CD player to the
first track of the disc. Press and hold the [ 4 ]
button (2 sec.) to play the first track (track No.
1) on the disc.
*
In case of MP3/WMA, the first track of the
current folder will be played.
Other various play functions
Scan play
This function allows you to locate and play
the first 10 seconds of all the tracks recorded
on adisc.
Press the [1 ] button to perform scan play.
Repeat play
This function allows you to play the current
track repeatedly or playa track currently
being played in the MP3/WMA folder
repeatedly.
CD:
1. Press the [ 2 ] button once or more until
"RPT ON" appears on the LCD to perform
repeat play.
2. Press [ 2 ] button repeatedly until "RPT
OFF' appears on the LCD to cancel repeat
playback.
MP3IWMA:
1. Press the [ 2 ] button once or more until
"TRACK RPT" appears on the display to
CZ101 14

CDIMP3IWMA Operations
perform repeat play, and "RPT" segment
lights on.
2. For MP3/WMA files, press [ 2 ] button
repeatedly until "FOLDER RPT" appears on
the display for folder repeat play.
3. Press [ 2 ] button repeatedly until "RPT
OFF"
appears on the display to cancel
AUX Operations
Press [SRC I <!> ] button on the panel or
remote control to select "AUX".
AUX is
just for Audio content with 3.5mm
Jack connector plugged into audio-in socket
on the front panel.
AUXInputsensitivitysetting
1. Press and hold the [0] button (2 sec.).
repeat playback, and "RPT' segment goes
off.
Random
play
This function allows you to play all tracks
recorded on adisc
in arandom order.
Press the [ 3 ] button
to perform random play.
2. Turn the [VOLUME] knob to select "AUX
SENS".
3. If the output level of connected external
audio
play"er is "HIGH", rotate [VOLUME]
knob and choose "LOW". And if the output
level is "LOW',choose "HIGH". .
15 CZ101

6. TROUBLE SHOOTING
GENERAL
Problem Cause Measure
Unit can not Unit
fuse blown.
Replace with new fuse ofcorrect rating.
power
on
Car battery fuse blown. Replace with new fuse ofcorrect rating.
Turn off the power and remove the DCP.
Unit can not
Press the [RESET] button with a thin rod.
power on
Note:
Nothing happens
when buttons are
The microprocessor has
When the [RESET] button is pressed, turn off
pressed. malfunctioned due
to noise, etc.
the ACC power."
Display is not
.. When the [RESET] button is pressed,
accurate. frequencies of
radio stations, titles, etc. stored
in memory are cleared.
Remote control Battery depleted.
Change the battery.
does not work
Battery installed incorrectly. Install the battery correctly.
Improper audio outputconnection. Check wiring and correct.
Volume set too low. Increase volume level.
No/low audio
Speakers damaged. Replace speakers.
output Heavily biased volume
balance. Adjust the channel balance to center position.
Speaker wiring is in contact with
Insulate all speaker wiring connections.
metal part of car.
Non-standard disc used. Use astandard disc.
Poor sound quality Speaker power rating does not
Replace speakers.
match unit.
or distortion
Wrong connections. Check wiring and correct.
Speaker is shorted. Check wiring and correct.
Tel-Mute
MUTE wire is grounded. Check the MUTE wiring and correct.
malfunction
Unit
resets itself Incorrectconnection between Check wiring
and correct.
when engine is off ACC and Battery.
CZ101 16

DISC Player
Problem Cause Measure
Another disc is already loaded. Eject the disc before loading the new
Disc cannot be one.
loaded. There is an object installed inside
the unit. Remove the object inside the unit.
Compact disc is dirty. Clean the compact disc with asoft cloth.
Sound skips
or is Compact disc is heavily scratched Replace with acompact disc with no
noisy.
or warped. scratches.
Sound is bad Condensation may form on the
when power is first internal lens when the car is Let dry for about 1hour with power on.
turned on. parked
in ahumid place.
7. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display Cause Measure
Disc is inserted incorrectly. Eject the disc then reload it properly.
ERROR 3The disc format is not supported. Try another disc.
ERROR 5This is afailure of deck's mechanism. Consult your store of purchase.
If an error display other than the ones described above appears, press the Reset button. If the
problem persists, turn off the power and consult your store of purchase.
*When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory
are cleared.
17 CZ101

Dimensions of the Main Unit:
188mmWidth x58mm Height x190mm Depth
7-215(width) x2-7/25(Height) x7-12/25(Depth)
Weight of the Main Unit: 2.87Ib. (1.30kg)
Dimensions of the Remote Control unit:
43mm Width x
11 mm Height x113mm Depth
1-213(Width) x215(Height) x4-215(Depth)
Weight of the Remote Control Unit:
1.160z. (36g) (including battery)
8. SPECIFICATIONS
FMTuner
Frequency range: 87.9-107.9MHz
Usable sensitivity:
8dBJl
Frequency response: 30Hz-15kHz
Stereo separation: 30dB(1kHz)
Signal/noise ratio: >55dB
AM Tuner
Frequency range: 530-171 OkHz
Usable sensitivity (SIN=20dB): 30dBJl
CD Player
System: Disc digital audio system
Frequency response: 20Hz-20kHz
Signal/noise ratio: >75dB
Total harmonic distortion: Less than 0.1% (1kHz)
Channel separation: >60dB
-,.--
,-"""
7" 178mm
EE
EE
0
(")
m
to
..- ..-
In
i:o
NN
N
<b
;!:
--
E
I.
6-213" 170mm
.1
E
~
7-215" 188mm ,
2" 50mm
I I
L...---J
1.1-4/5".1 46mm
2-7/25" 58mm
•
MP3IWMA mode
MP3 sampling rate: 8kHz to 48 kHz
MP3 bit rate: 8kbps
to 320 kbps /VBR
WMA bit rate: 8kbps to 320 kbps
Logical format: IS09660 level 1,2
Joliet or Romeo file system
Notes:
• Specifications and design are subject
to change without notice for fu rther
improvement.
Audio Amplifier
Maximum power output:
180W (45W x
4)
Speaker impedance: 4Q (4 to 8 Q allowable)
Input
Audio input sensitivity:
High: 320mV (at 1V output)
Mid: 650mV (at 1V output)
Low: 1.3V (at 1V output)
(input impedance 10 kQ or greater)
Aux-in level:
::;; 2V
General
Power supply voltage:
14.4VDC (10.8
to 15.6V allowable),
negative ground
Pre-Amp output voltage:
2.0V (CD play mode: 1kHz,
OdB, 10kQ load)
Fuse:15A
Power Output:
18W RMS x 4 Channels at 4Q
and 1% THD+N
Signal to Noise Ratio:
94dBA (reference: 1W into 4)
CZ101 18

9. INSTALLATION IWIRE
CONNECTION GUIDE
CONTENTS
1) Before Starting 19
2) Package Contents 19
3) General Cautions 19
4) Cautions
on Installation 20
5) Installing the Source Unit 20
6) Removing the Source Unit 22
7) Wiring and Connections 23
8) Connecting the Accessories 24
1) Before Starting
1. This set is exclusively for use in cars with
anegative ground 12 Vpower supply.
2. Read these instructions carefully.
3. Be sure to disconnect the battery
"terminal" before starting. This is to
prevent short circuits during installation.
(Figure
1)
Car battery
2) Package Contents
Source unit 1
Front panel 1
Trim ring 1
Mounting bracket.. 1
Screws M5x6 mm 4
L-key 2
3) General Cautions
1. Do not open the case. There are no
user serviceable parts inside. If you
drop anything into the unit during
installation, consult your dealer
or an
authorized Clarion service center.
19 CZ101
Figure 1
Wire connector 1
Remote control unit
(With battery) 1
Owner's manual. 1
Warranty card 1
Special screw (Front panel lock) 1
2. Use asoft, dry cloth to clean the case.
Never use arough cloth, thinner, benzine,
or alcohol etc. For tough dirt, apply alittle
cold or warm water
to asoft cloth and wipe
off the dirt gently.