
5
USAGE AND CARE 
1. Do not force the log splitter. It will do the job better and safer at the rate for which it was 
designed.
2. Disconnect the plug from the power source before making any adjustments, changing 
accessories, or storing the log splitter. Such preventive safety measures reduce the risk of 
starting the log splitter accidentally.
3. Storethe log splitter out of the reach of children and do not allow persons unfamiliar with 
log splitters or these instructions to operate the log splitter. Log splitters are dangerous in 
the hands of untrained users.
4. Maintain the log splitter. Check for misalignment or binding of moving parts, breakage of 
parts and any other condition that may affect the log splitters operation. If damaged, 
have the log splitter repaired before use. Many accidents are caused by poorly 
maintained power tools.
5. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting 
edges are less likely to bind and are easier to control.
SERVICE 
1. Have your power tool serviced by a qualified repair person using only identical 
replacement parts. This will ensure that the safety of the power tool is maintained.
ADDITIONAL SAFETY RULES FOR LOG SPLITTERS 
Extra special care is required when using this powerful tool to safeguard yourself and 
that of others around you.
1. Never tamper with the log splitter or attempt to operate the machine without covers. Do 
not allow split logs to accumulate, always clean up as you work, accumulated split logs 
and wood chips can create a hazardous work environment.
2. The operator must operate the machines’ controls with both hands without using other 
makeshift systems, i.e. wedging control levers down etc.
3. The machine must only be used by one operator. The machine must be used by adults 
only. 
4. Check that the logs being split are free from nails or wire, which may fly up or damage the 
machine. The ends of the logs must be cut square. Branches must be cut off flush with the 
trunk.
5. Never attempt to split two logs at once; one may be ejected with possibly serious 
damage.
6. Split wood in the direction of the grain. Do not attempt to split a piece of wood across the 
grain as this could damage the machine.
7. Do not attempt to load the log in to the machine whilst the log splitter is in motion.
8. Keep your hands well away from any splits and cracks which open in the log.
9. Never leave the machine unattended while it is running. If you leave the machine, even 
for a short time, disconnect it from the power supply.
10. Never use the machine whilst under the influence of alcohol, drugs, medicines, or when 
you are tired. A clear mind is essential for safety.
11. Always disconnect the power cable when not in use, when carrying out maintenance 
work or when moving the machine.