Clarke LOGBUSTER H4 Instruction Manual

OPERATION & MAINTENANCE
INSTRUCTIONS
ORIGINAL INSTRUCTIONS LS0219 - ISS 2
4 TON LOG SPLITTER
MODEL NO: LOGBUSTER H4
PART NO: 3402152

2
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
INTRODUCTION
Thank you for purchasing this CLARKE 4 Ton Log Splitter.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
ENVIRONMENTAL RECYCLING POLICY
Through purchase of this product, the customer is taking on the
obligation to deal with the WEEE in accordance with the WEEE
regulations in relation to the treatment, recycling & recovery and
environmentally sound disposal of the WEEE.
In effect, this means that this product must not be disposed of with general
household waste. It must be disposed of according to the laws governing Waste
Electrical and Electronic Equipment (WEEE) at a recognised disposal facility.

3
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
SAFETY SYMBOLS
The following symbols represent important information about the product or
instructions on its use.
Read these
instructions in full
before using the
machine.
Dispose of any used oil
in an environment-
friendly way.
Wear safety footwear! Do not use in the rain.
Wear protective
gloves!
Danger! Keep clear of
moving parts!
Wear eye protection!
Do not remove
jammed logs with your
hands.
Wear hearing
protection!
Before starting any
repair maintenance or
cleaning, always
disconnect the power.
Keep your work space
tidy! Untidiness may
result in accidents.
Avoid injury from the
movement of the
splitting blade
Do not remove or
tamper with any
protection or safety
device.
Keep bystanders
away from the
working area.

4
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
GENERAL SAFETY RULES
WORK AREA
1. Keep the work area clean and well lit. Cluttered and dark areas invite
accidents.
2. Do not operate log splitters in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Log splitters create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while operating the log splitter.
Distractions can cause you to lose control.
4. The surface must be perfectly level to prevent the machine from moving
during operation.
ELECTRICAL SAFETY
1. The log splitters plug must match the outlet. Never modify the plug in any
way. Unmodified plugs and matching outlets will reduce risk of electric
shock.
2. Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
3. Do not expose log splitters to rain or wet conditions. Water entering a log
splitter will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the log splitter. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric
shock.
5. When operating the log splitter outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
6. Do not leave the log splitter unattended when plugged in to the mains
supply.
PERSONAL SAFETY
1. Stay alert, watch what you are doing and use common sense when
operating a log splitter. Do not use the log splitter while you are tired or
WARNING: READ ALL OF THESE INSTRUCTIONS. FAILURE TO FOLLOW ALL
INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND/
OR SERIOUS INJURY. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

5
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
under the influence of drugs, alcohol or medication. A moment of
inattention while operating log splitters may result in serious personal injury.
2. Use safety equipment. Always wear eye protection. Safety equipment such
as non-skid safety shoes, close fitting clothing and suitable work gloves
should always be used.
3. Avoid accidental starting. Ensure the switch is in the off position before
plugging in.
4. Do not overreach. Keep proper footing and balance at all times. This
enables better control of the log splitter in unexpected situations.
5. Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
USAGE AND CARE
1. Do not force the log splitter. It will do the job better and safer at the rate for
which it was designed.
2. Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing the log splitter. Such
preventive safety measures reduce the risk of starting the log splitter
accidentally.
3. Store the log splitter out of the reach of children and do not allow persons
unfamiliar with log splitters or these instructions to operate the log splitter.
Log splitters are dangerous in the hands of untrained users.
4. Maintain the log splitter. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the log
splitters operation. If damaged, have the log splitter repaired before use.
Many accidents are caused by poorly maintained power tools.
5. Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
SERVICE
1. Have your log splitter serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the log splitter
is maintained.

6
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
LOG SPLITTERS SPECIFIC WARNINGS
UNDERSTAND YOUR LOG SPLITTER
• Read and understand the owner's manual and labels affixed to the log
splitter. Learn its limitations as well as the specific potential hazards.
DRUGS, ALCOHOL AND MEDICATION
• Do not operate the log splitter while under the influence of drugs,
alcohol, or any medication that could affect your ability to use it
properly.
AVOID DANGEROUS WORKING CONDITIONS
• Place the log splitter on a 72-85 cm high, stable, flat, and level work
bench where there is plenty of room for handling, and help the operator
stay alert. Bolt the log splitter to the work surface if it tends to slip, walk, or
slide.
NOTE: The log splitter is heavy and may require 2 people to lift into position.
• Keep your work area clean and well lit. Cluttered areas invite injuries.
• Do not use the log splitter in wet or damp areas or expose it to rain.
• Do not use it in areas where fumes from paint, solvents or flammable
liquids pose a potential hazard.
INSPECT YOUR LOG SPLITTER
• Check your log splitter before turning it on.
• Keep guards in place and in working order.
• Replace damaged, missing or failed parts before using it.
DRESS PROPERLY
• Do not wear loose clothing, gloves, neckties or jewelry (rings, wrist
watches). They can be caught in moving parts.
• Protective electrically non-conductive gloves and non-skid footwear are
recommended when working.
• Wear protective hair covering to contain long hair, preventing it from
get caught in machinery.

7
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
PROTECT YOUR EYES AND FACE
• Any log splitter may throw foreign objects into the eyes. This can cause
permanent eye damage. Always wear safety goggles. Everyday
eyeglasses have only impact resistant lenses. They are not safety glasses.
• Do not put the log splitter on the ground for operations. This is awkward
operating position that the operator has to bring his face close to the
machine, and thus risks being struck by wood chips or debris.
EXTENSION CABLES
• Improper use of extension cables may cause inefficient operation of the
log splitter which can result in overheating.
• Make sure that the extension cable is no longer than 10m and its cross
section is no less than 2.5mm2to allow sufficient current flow to the
motor.
AVOID ELECTRIC SHOCK
• Check that the electric circuit is adequately protected and that it
corresponds with the power, voltage and frequency of the motor.
• Check that there is a ground connection, and a regulation differential
switch upstream.
• Ground the log splitter. Prevent body contact with grounded surfaces:
pipes, radiators, ranges, and refrigerator enclosures.
• Never open the push button box on the motor. Should this be necessary,
contact a qualified electrician.
• Make sure your fingers do not touch the plug’s metal prongs when
plugging or unplugging the log splitter.
PREVENT FIRES
• Do not smoke or have open flames when operating or refilling the log
splitter with oil.
• Never operate the log splitter near a flame or spark. Oil is flammable.

8
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
KEEP BYSTANDERS AWAY
• The log splitter must be always operated by one person only. Other
people should keep a safe distance from the work area, especially
when the log splitter is under operation.
• Never let another person help you free a jammed log.
INSPECT YOUR LOG
• Make sure there are no nails or foreign objects in logs to be split. The
ends of the logs must be cut square. Branches must be cut off flush with
the trunk.
DON'T OVERREACH
• Floor must not be slippery.
• Keep proper footing and balance at all times.
• Never stand on log splitter. Serious injury could occur if the tool is tipped
or if the cutting tools is unintentionally contacted.
• Do not store anything above or near the log splitter where anyone might
stand on the tool to reach them.
AVOID INJURY FROM UNEXPECTED ACCIDENT
• Always pay full attention to the movement of the log pusher.
• Do not attempt to load the log on until the log pusher has stopped.
• Keep hands out of the way of all moving parts
PROTECT YOUR HANDS
• Keep you hands away from splits and cracks which open in the log; They
may close suddenly and crush or amputate your hands.
• Do not remove jammed logs with your hands
DON'T FORCE THE TOOL
• It will do a better and safer job at its intended rate.
• Never try to split logs larger than those indicated in the specifications
table. This could be dangerous and may damage the machine.
• Don't use log splitter for a purpose for which it was not intended.
NEVER LEAVE LOG SPLITTER RUNNING UNATTENDED
• Don't leave log splitter until it has come to a complete stop

9
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
DISCONNECT POWER
• Unplug when not in use, before making adjustments, cleaning, or
working on the log splitter.
MAINTAIN YOUR LOG SPLITTER WITH CARE
• Keep the log splitter clean and free from debris for best and safest
performance.
PROTECT THE ENVIRONMENT
• Take any used oil to an authorized collection point.
• Do not discharge into drains, soil or water.
MAKE THE WORKSHOP CHILDPROOF
• Lock the workshop. Store the log splitter away from children and others
not qualified to use it.
SPECIAL WARNINGS & INSTRUCTIONS
• The splitting operation of the machine is designed to be activated by
one person. While there is the possibility that additional operators could
be working with the machine (e.g. for loading and unloading), only one
operator should activate splitting operations;
• The machine shall not be used by children;
• Do not remove jammed logs with your hands. Never let another person
help you free a jammed log.

10
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
SPECIFICATIONS
*This product is designed so that the motor may be run under load for an accumulated period of 4
minutes only and off load for an accumulated period of 6 minutes in any 10 minute period.
Motor 230V @ 50Hz / 1 Ph
Input Wattage 1500W
Duty Cycle S6 40%*
Log Size Capacity Diameter 5 - 25 cm
Length 13 - 37 cm
Maximum Force 4000 kg
Hydraulic Pressure 16.5 Mpa
Hydraulic Oil Capacity 2.4 L
Ram Travel 29 cm
Speed Forward 3.86 cm/sec
Retract 6.44 cm/sec
Noise Pressure Level (LpA) under no load; 78.8 dbA
under full load 89.8 dbA
Vibration <2.5 m/s²
Dimensions Length 99.5 cm
Width 42.5 cm
Height 61 cm
Weight 45 kg