Clarke CWTS1 Owner's manual

ASSEMBLY & USER
INSTRUCTIONS
LS0412
WORK TABLE SUPPOR TS
MODEL NO: CWTS1
PART NO: 6600020

2
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
INTRODUCTION
Thank you for purchasing the CLARKE Work Table Supports. Before attempting
to use this product, please read this manual thoroughly and follow the
instructions carefully.
GENERAL SAFETY RULES
IMPORTANT: Failure to follow these precautions could result in personal
injury, and/or damage to property.
1. ALWAYS seek help when moving
large items.
2. ALWAYS keep work area clean.
Cluttered areas invite accidents.
3. ALWAYS keep children away from
work areas.
4. ALWAYS keep your proper footing
and balance at all times - don’t
overreach. For best footing, wear
rubber soled footwear. keep floor
clear of oil, scrap wood, etc.
5. ALWAYS check tools are in
perfect working order before
using.
6. ALWAYS check the stability of
thefinished bench before use.
7. ALWAYS selectworktop and shelf
materials of sufficient strength
and size to support the intended
load.
SPECIFICATIONS
Model :.....................................................................................CWTS1
Part No :................................................................................ 6600020
Maximum Capacity :200 kg (depending on table materials used)

3
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
ASSEMBLY
We recommend a worktop and shelf thickness of at least 18 mm.
1. Ensure floor is firm and level
before starting.
2. Place the worktop (not supplied)
on top of the two work table
supports as shown.
NOTE: Seek assistance if required.
3. Secure the top to the work table
supports using suitable nuts, bolts
and washers (not supplied).
4. Measure and fit a shelf in the
same way and secure the work
table supports to the floor if
required using suitable fixings
(not supplied).
MAXIMUM LOAD
Whilst the work table supports have
a maximum capacity of 200 kg, the
maximum capacity of the finished
workbench will depend on the
materials used and the distance
between the supports. this may be
considerably less than 200 kg and is
the responsibility of the user.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.