Classic Accessories OSWEGO PONTOON BOAT User manual

Oswego
The
Pontoon Boat
OWNER'S MANUAL
CLASSIC ACCESSORIES, INC.
KENT, WA USA 98032 ©2011
classicaccessories.com
Bateau ponton
MANUEL DE L'UTILISATEUR
Oswego
Le

2
OSWEGO PONTOON BOAT OWNER’S MANUAL
TABLE OF CONTENTS
INTRODUCTION 3
PRODUCT CAPACITY AND SPECIFICATIONS 4
SAFETY INFORMATION AND SYMBOLS 5
RESPONSIBILITIES OF THE OPERATOR(S) 6
CERTIFICATE OF ORIGIN AND HIN NUMBERS 7
INFLATION AND ASSEMBLY 8
ELECTRIC MOTOR AND BATTERY USE 9
PARTS LIST 10
ASSEMBLY AND USE 11-15
TROUBLESHOOTING 16
REPAIR AND TROUBLESHOOTING 17
CARE AND STORAGE 18

3
OSWEGO PONTOON BOAT OWNER’S MANUAL
Congratulations on your purchase of your Oswego pontoon boat.
This manual has been compiled to help you assemble your boat correctly and
operate it safely. It contains specific details of the boat, including its parts and
equipment, and information on its safe operation, proper care, maintenance and
repair. Please read it carefully, and familiarize yourself with your boat before
using it.
If this is your first pontoon boat, or if you are changing to this type of boat for
the first time, for your own comfort and safety, please ensure that you obtain
handling and operating experience before serious use. Doing so will assure
many years of trouble free use and enjoyment.
PLEASE KEEP THESE INSTRUCTIONS IN A SECURE PLACE, AND TRANSFER THEM
TO THE NEW OWNER IF YOU SELL THE CRAFT.
MODIFICATIONS
Because of possible interference with the factory design and integrity of the
boat, owner modifications to the boat, any of its parts, equipment or systems
are not recommended and will void your warranty coverage.
INTRODUCTION
Questions, problems, missing parts? Before returning to your retailer, call customer service
at 1-800-854-2315, 8 a.m. - 4 p.m., PST, Monday-Friday.

4
OSWEGO PONTOON BOAT OWNER’S MANUAL
BOAT CAPACITY
The person/load capacity is partly
dependent on proper seating and load
distribution. Make sure that your load
is distributed evenly and the seating
position is such that, when afloat, the
boat rides level in the water.
WARNING - DO NOT EXCEED THE
MAXIMUM CAPACITY OF THIS BOAT
UNDER ANY CIRCUMSTANCES.
PRODUCT CAPACITY & SPECIFICATIONS
BOAT SPECIFICATIONS
Product Name: Oswego Pontoon Boat
Dimensions: 120 inch L x 56 inch W x 26 inch H (top of the seat)
305 cm L x 142 cm W x 66cm H (top of the seat)
Dry Weight: 76 lbs (34,5kg)
Maximum Persons Capacity: 1person
Maximum Persons & Gear Capacity: 450 lbs (204 kg)
Recommended Inflation Pressure: 2.5psi (0.17 BAR)
Maximum Motor Thrust: 30 lbs (14 kg)
Maximum Motor Shaft Length: 36 inch (91 cm)
October 13, 2011
Classic Accessories, Inc.
Maximum Capacity Label - 450 Lbs Max.
Label Size: 4.5 inch L x 5.25 inch H
For: Oswego
Job Number: 11cF51_12705
Black White Yellow
PMS 109C
MAXIMUM CAPACITIES
204 kg
0.17 bar (main chambers)
MANUFACTURER: CLASSIC ACCESSORIES, INC.
KENT, WA, USA 98032
5.25 inch
4.5 inch
U.S. COAST GUARD
1PERSON OR 275LBS
450 LBS PERSONS, GEAR
PRESSURE = 2.5 psi (main chambers)
MAX 30 LB THRUST MOTOR

5
OSWEGO PONTOON BOAT OWNER’S MANUAL
SAFETY INFORMATION AND SYMBOLS
The symbol to the left is the Safety Alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER
Indicates a potentially hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in
property damage.
This manual lists certain recommended practices and provides some basic
precautions. However, this list of precautions is not all-inclusive. Users
must follow all applicable laws, rules, and regulations and should exercise
appropriate caution in the safe operation of this pontoon boat.
REMEMBER - always use common sense when using your pontoon boat.

6
OSWEGO PONTOON BOAT OWNER’S MANUAL
RESPONSIBILITIES OF THE OPERATOR
SAFETY
• Readthisowner’smanualcarefullybeforeusing
your pontoon boat.
• Thisproductisnottobeusedbychildrenunder
16 years of age or by any child
without adult supervision. This pontoon boat is
not a toy. Check the laws in your state.
• Notforusebychildrenoraspooltoy.
• Thisisnotalifesavingdevice.
• YouMUSTalwayswearanapprovedCoastGuard
personal flotation device (PFD).
• Allsafetyequipment&PFDsmustproperlytthe
user, be in good condition and suitable
for your body weight.
• Knowandfollowalllocalwatersafetyrulesand
boating regulations.
• Donotexceed350lbs(159kg)totalcargoweight.
(The weight of you and all of your gear
shouldnotexceed350lbs(159kg).
• Inspectyourpontoonboatforwearordamage
before and after each use.
• Class1riverrating:notforuseinroughwater,
white water, rapids or open sea.
• Neveroatalone.
• Neverusethisboatinbadweather.
• Keepsharpobjects(knives,shhooks,etc.)
away from the pontoons.
• Donotuseundertheinuenceofdrugsor
alcohol.
• Donottowthispontoonboat.
• Useonlyinwaterfreefromdebrisand
obstructions.
• Donotuseinhighwind,rapidcurrents,open
water or dangerous tides.
• Seekshelterfromwaterifthereisthreatof
lightning.
• Donotstandonthisproductwhileinuse.
• Neverjumpintoordivefromthisboat.
• Inatewithcoldaironly.
• DonotoverinateoruseCO2orahighpressure
air compressor to inflate.
• Followtheinationsequencelistedinthis
instruction manual.
• Recommendedworkingpressureis2.5psi(0.17
bar). DO NOT EXCEED 2.5 PSI.
• Checkforleaksbeforeusing.
• Not a life saving device
• Not a toy
• Not to be used by children
under age 16
• Do not overload
• Always wear an approved
personal flotation device
(life preserver)
• Check for leaks before
using
• Use only in water
away from debris
and obstructions
• Do not over inflate
• Never dive into or from
this boat
• Never leave boat in water
when not in use
• Do not use in high wind,
rapid currents, open water
or dangerous tides
• Know and follow local
water safety rules and
boating regulations
• Follow the inflation
sequence listed in the
instruction manual
• Partially deflate if leaving in
the sun
• Ceci n’est pas un appareil
de sauvetage
• N’est pas jouet
• Ne doit pas être utilisé par
des enfants de moins de 16
ans
• Ne pas surcharger
• Veiller à toujour porter un
gilet de sauvetage
approuvé
• Vérifier qu’il n’y a pas de
fuites avant toute utilisation
• Utiliser uniquement cette
embarcation dans des eaux
sans débris ni obstacles
• Veiller à bien connaître
l’endroit de navigation
• Ne jamais plonger sur ni
depuis ce bateau
• Ne pas utiliser lors de vents
forts, de courants rapides,
en haute mer ou lors de
marées dangereuses
• Ne jamais laisser le bateau
dans l’eau lorsqu’il n’est
pas utilisé
• Connaître et suivre les
règles locales de sécurité et
de navigation
• Ne pas trop gonfler
• Suivre l’ordre de gonflage
indiqué dans le manuel
• Dégonfler un peu si laissé
au soleil
W A R N I N G
A V E R T I S S E M E N T
6.43 inch
4.64 inch
November 9, 2011
Classic Accessories, Inc.
PONTOON BOAT WARNING LABEL
Label Size: 4.64 inch L x 6.43inch H
For: all CA and WSL pontoon boats
Job Number: 11cF55_12157
REVISED
DO NOT stand on
your boat while
on the water
WARNING
• Rememberthatairpressurechangeswith
temperature and elevation so always check
your air pressure before use.
• Partiallydeateifleavingboatindirectsunlight
or within a vehicle in sunlight.
• Checkallframepins,screwsandwingnutsbefore
each use.
CARE
• Cleanwithwarmwaterandamilddetergent.
• Toavoidmildewbesureyourboatisdrybefore
storing it.
• Deatepontoonsslightlybetweenusestoextend
the life of your boat.

7
OSWEGO PONTOON BOAT OWNER’S MANUAL
CERTIFICATE OF ORIGIN AND HIN NUMBERS
CERTIFICATE OF ORIGIN
A separate Certificate of Origin form has been included with this pontoon boat. If your state requires
registration of your pontoon boat, you will need to include the HIN number on the form. Check your state's
boating regulations to see if your pontoon boat requires registration.
LOCATING THE HIN (HULL IDENTIFICATION NUMBER)
A unique HIN Number or "Hull Identification Number" is required for every pontoon boat specific to that
pontoon boat only. The assigned number appears on three locations of the pontoon boat (once on each
pontoon skin and on the frame).
A HIN is located on the
inside of each pontoon
(Right skin shown).
XXQ00001L708
Example of HIN number
A HIN is also
located on a plate
on the rear frame.
Front

8
OSWEGO PONTOON BOAT OWNER’S MANUAL
INFLATION AND ASSEMBLY
ASSEMBLY
It is important to follow these instructions to successfully and safely assemble
your Classic Accessories pontoon boat.
Please pay particular attention to the bold faced instructions and any
information which has this symbol next to it.
PROPER INFLATION
During final inflation, inflate until most of the wrinkles in the fabric are gone and it feels firm to the touch,
butDONOTexceed2.5psi(0.17bar)inthemainairchambers.
CAUTION - DO NOT OVER INFLATE YOUR PONTOON BOAT
Water temperature and weather affect the air pressure in the boat. In cold weather your pontoon boat will
lose some pressure because the air will contract. If this occurs, you may want to add more air.
Inhotweather,theairwillexpand.Youmustletoutsomeairtopreventthepontoonsfromfailingfromover
pressure. Avoid exposing your pontoon boat to extreme temperatures (hot or cold).
CAUTION
On warm sunny days, keep the pontoon boat either in water or in shade (if kept inflated on land). This will
decrease the risk of overexpansion of the pontoon chambers posed by rising temperatures, which can result
in seam tears, delamination and pinholes.
Avoid asphalt, sand, pebbles or concrete in direct sunlight as they radiate high ground heat.
Also understand that changes in altitude will cause the air in the bladders to expand or contract. If traveling
to higher elevation with the pontoon boat inflated, frequently check the pressure in the pontoons to avoid
over pressure. If traveling to lower elevation you may have to add more air to maintain proper pressure in the
pontoons.
WARNING - ALWAYS CHECK THE AIR PRESSURE IN THE PONTOONS BEFORE
AND DURING EACH USE.

9
OSWEGO PONTOON BOAT OWNER’S MANUAL
ELECTRIC MOTOR AND BATTERY USE
USING A MOTOR WITH YOUR PONTOON BOAT
Clamp your motor to the motor mount provided on the rear of your boat and
carefully follow the setup and safety instructions provided with your motor.
Using a motor and battery will affect the weight distribution on your boat.
Before using your boat for the first time with a motor check and adjust your seat
position and cargo so your boat rides level in the water.
WARNING - THIS PONTOON BOAT IS NOT RATED FOR USE WITH GASOLINE
OR DIESEL OUTBOARD MOTORS.
WARNING - MAKE SURE TO FOLLOW ALL SAFETY INSTRUCTIONS AND
PROCEDURES THAT CAME WITH YOUR ELECTRIC MOTOR.
IMPORTANT - A MAXIMUM ELECTRIC MOTOR SHAFT LENGTH OF 36 INCH (91 CM)
WITH A MAXIMUM THRUST OF 30 LBS (14 KG) IS RECOMMENDED.
USING A BATTERY WITH YOUR PONTOON BOAT
Be sure to secure your battery to the rear wire platform so that it will not move or
tip during operation. For the best weight distribution we recommend placing the
battery as close to the seat back (center of the boat) as possible.
WARNING - BATTERIES CAN LEAK POISONOUS GASES OR LIQUIDS OR
EXPLODE. USE EXTREME CARE AND FOLLOW ALL SAFETY INSTRUCTIONS AND
PROCEDURES THAT CAME WITH YOUR BATTERY.
WARNING - MAKE SURE THAT YOUR ENGINE AND BATTERY ARE SECURELY
FASTENED TO YOUR PONTOON BOAT BEFORE AND DURING EACH USE.
WARNING - ONLY USE AN APPROVED MARINE BATTERY. USE PROPER
SHIELDING TO PREVENT SHORT CIRCUITS.

10
OSWEGO PONTOON BOAT OWNER’S MANUAL
PARTS LIST
Before you begin, please unpack the carton and
check that you have all your parts.
IMPORTANT: All small parts are located inside
the center pocket of one of the pontoon storage
bags marked by a tag for easy identification.
Tools Needed: Rubber Mallet
2Pontoon frames
(left and right)
1Seat frame
1Seat
(folding seat with screws,
washers, lock washers and
wingnuts installed)
2Foot pegs
1Rear platform frame
1Rear cargo platform
1Rod holder
with clevis pin
2Pontoons
1underseat apron
1Anchor bag with cord
2Pontoon bladder patches
(Two self-adhesive patches)
1Inflation adapter
1Inflation valve
wrench
2Oar locks
2Oar lock cotter pins
8Clevis Frame Pins
with wire security
retainers
2Oars
(4pieces or 2per oar)
Oar Parts
Small Parts (Small parts bag located in pontoon pocket)
Soft Parts
Metal Frame Parts
1Allen wrench (4mm)
1Ball end wrench (6mm)
1Detachable micro-slit
foam fly patch
2Bladders
(installed within pontoons)
1Front rentention cord

11
OSWEGO PONTOON BOAT OWNER’S MANUAL
3. Inflate the pontoon bladders.
The valve is located on the top of the
pontoons in front of the main pocket [A].
The valve has a center button that opens and
closes the valve by simply pushing down, and
turning a quarter turn [B].
THE VALVE IS OPEN WHEN THE CENTER
BUTTON IS DOWN, AND CLOSED WHEN IT
IS UP. BEFORE INFLATING, MAKE SURE THE
VALVE IS IN THE CLOSED (UP) POSITION.
Unscrew the valve cap and make sure the
valve is closed. (If the valve is open unlock it
by by pushing down on the center button and
turning a quarter turn). Insert the inflation
adapter into the valve and twist to secure [C].
Inflate using a foot or hand pump with a cone-
type nozzle fitting [D].
Inflate the pontoon to about 3/4 full.
Do not inflate beyond 3/4full because it
will make the next step very difficult—
attaching the pontoons to the frame.
Repeat this step with the other pontoon.
Youwillfullyinflatethepontoonsinstep10.
1. Confirm that all the parts are present.
(See the parts list on page 10).
2. Identify the right and left pontoons.
Youcanidentifytherightandleftpontoonsbythe“R”(right)and“L”(left)labels
sewn on the inside of the pocket on top of each.
4. Determine the seat placement.
The seat placement determines the center of gravity of the boat. Where you
attach the seat to the frame depends on your size and whether you will be
using a motor and battery or carry cargo on the boat.
Use the following information about seat placement as guide to help you
setup your boat for optimum balance in the water. After setup, load your
boat with the gear you would use fishing, and try your boat in shallow
water to determine if further seat position adjustment is necessary for
optimum weight distribution.
•Ifyouareupto5ft 6inch (168 cm) in height, place the forward seat
screws (underside of seat) into the front 1/3 of the seat frame bars.
•Ifyouareupto6ft (183 cm) in height, place the forward seat screws
(underside of seat) into the middle section of the seat frame bars.
•Ifyouareover6ft (+183 cm) in height, place the forward seat screws (underside of seat) into the rear 1/3 of the seat
frame bars.
•Ifyouuseamotorandbatteryorloadthecargobasketwithanyheavyitems,youwillneedtoadjusttheseatforwardto
offset the load and keep your boat balanced. The amount you will need to move the seat forward depends on the weight
of the cargo and will necessitate that you try out the new position in shallow water before setting out.
•Trymakingadjustmentsforcargoweightbymovingseatforwardin1inch (3cm) increments.
Press and
turn on
center
button
Inflation
adapter
Insert
into
valve and
twist to
inflate
Inflation Valve
A
D
BC
ASSEMBLY AND USE
Seat Frame

12
OSWEGO PONTOON BOAT OWNER’S MANUAL
5. Attach the seat to the seat frame.
Locate the four 2inch (5cm) screws coming out of the bottom
of the seat. Unscrew the wing nuts and remove the washers and
lock washers. Place the seat with screws facing downwards into
the two bars on the seat frame and position the seat in the place
that is best for your height and weight (see above). Once the
seat placement has been determined, attach the washers, lock
washers and wing nuts onto the screws and tighten to hold the
seat into place.
6. Attach the seat frame to the pontoon frames.
Insert the seat platform tubes onto the pontoon frame
posts with the seat facing the front. The front of the
pontoonframesaretheendslabeled“L”(left)and“R”
(right).(YoumayneedtoLIGHTLYtaptheframeswitha
rubber mallet to fit).
Align the holes and secure with four clevis pins.
You MUST lock the security retainers on all four clevis
pins to insure that the frame stays together.
Insert clevis pins on the frame side not in between
bladder and frame to avoid abrasion of pontoon.
7. Attach the rear platform frame.
In order to attach the rear platform frame you must first
partially attach the wire cargo deck. Start by sliding the
bent wire tabs into the slots welded on to the rear of each
pontoon frame.
Next, push the rear platform frame tubes into the open
tubes on the rear of each pontoon frame. Make sure to
insert the wire guides on the rear of the wire cargo deck
into the corresponding holes on the rear platform frame as
you push the tubes together.
Attach the rear corners with two clevis pins. These secure
the wire cargo deck and the rear platform frame to the
pontoon.
8. Thread the anchor bag cord.
Start by feeding the cord into the front
anchor cord pulley located on the side
of either pontoon frame. Continue by
threading the cord through the cord
guides and under all frame tubes.
Next, insert the cord through the rear
cord tube guide [1] on the rear platform
frame. Finish by threading the cord
through the pulley mounted on the rear
platform frame and attaching the cord to
the anchor bag.
Motor mount can
be mounted to
either side
Note: The anchor bracket can be placed
on either side of the rear platform frame.
Insert the included ball-end wrench into
the bottom of the anchor stud while
holding the nut on top of the stud with
an adjustable wrench
to loosen.
1
Attach this
end of anchor
line to the
anchor bag
Note: Seat and p0ntoons
removed for clarity
Front anchor
cord pulley

13
OSWEGO PONTOON BOAT OWNER’S MANUAL
9. Attach the pontoons to the frames.
Each pontoon attaches to a metal pontoon frame with four
webbing attachment straps.
Locate the left and right pontoon frames.
On the front of each pontoon frame (where the
front of the boat will be) there is a “L" (left) or
“R” (right) label indicating left or right.
Place a right pontoon frame on top of the
right pontoon as shown. There is a “L” (left)
or “R” (right) label inside the pocket of each
pontoon). The longest straight tube of each
frame should be on the same side of the
pontoon as the pontoon zipper.
Illustrating right hand
pontoon and frame
1.
2.
3.
4.
5.
10. Inflate the pontoon completely.
Finish inflating the pontoons as outlined in Step 3.
Inflate to approximately 2.5psi (0.17 BAR). Inflate until firm but not hard. DO NOT
over inflate.
Now attach the two inside and two outside webbing straps
on the pontoon to the pontoon frame. Thread the straps as follows:
1. Through the metal rectangle on the frame…
2. Back to the buckle…
3. Through the buckle threading path…
4. Match the rip-and-grip to each other.
5. Fold the remaining webbing. Back it through the metal rectangle
and trap it between the pontoon and webbing. Repeat for the
remaining three straps.
Repeat the procedure with the left pontoon.
FRONT

14
OSWEGO PONTOON BOAT OWNER’S MANUAL
11. Attach the anchor system.
The anchor system consists of a mesh weight bag and a length of cord threaded through
the frame (step 9).
The bag is filled with rocks or metal weights (not included). Usually 6 to 8 lbs (2,7to 3,6
kg). will keep you anchored in a light breeze but the weight needed will vary depending on
your weight, your cargo weight, currents and wind.
There are built-in cleats on the inside of each pontoon frame behind the front anchor cord
pulley. Thread the cord around the front anchor cord pulley and back to the cleat. Thread
the cord in the front and out the back of each cleat . To cleat the cord while anchoring,
simply pull the cord into the jaws of the cleat. Pull up and away
from the cleat jaws to release.
If the anchor cord cleat or the anchor cord pulleys ever loosen,
use the included Allen wrenches to tighten.
12. Insert the oar locks.
Insert an oar lock into the top of both oar lock brackets on the pontoon frames. There are
three oar lock positions; we suggest starting with the forward most position. If you have the
seat set back you may prefer the middle or back position. Secure each oar lock with an oar
lock clevis pin.
13. Insert the foot pegs.
Insert the foot pegs into the pontoon frame as shown. Starting with a
position in the middle of the adjustment range, align the holes and secure
with two clevis pins.
14. Attach the stripping apron.
Pull apart the back of the apron behind the circular seat hole
and, working from the front, fit the apron seat hole around the
bottom of the seat. Reattach the hook and loop tabs at the back
of the apron.
Front anchor
cord pulley
Anchor cord cleat

15
OSWEGO PONTOON BOAT OWNER’S MANUAL
oar stop
18. Do the final fitting adjustments.
Sit in the boat on dry land and adjust the foot pegs and oar lock placement to your leg length and preference.
Float your pontoon boat in shallow water. Push off, get seated comfortably, place your feet on the foot pegs and check to
see if you are level in the water. (This is easier with another person on shore who can let you know if you are level or not).
WARNING - The goal is to find your balance point. When you are floating in the boat
it should be level in the water.
WARNING - Using a motor and battery or placing heavy cargo in the wire cargo deck
may necessitate moving the seat forward.
WARNING - If you need to adjust the seat or foot pegs bring the boat back to shore
and make the needed adjustments.
WARNING - DO NOT STAND UP IN YOUR BOAT WHILE ON THE WATER.
YOU COULD LOOSE YOUR BALANCE AND FALL OVERBOARD.
WARNING - THIS BOAT IS NOT RECOMMENDED FOR USE IN SALTWATER.
Practice going forward and backward a bit to get comfortable. Then catch some fish and enjoy your boat!
15. Set up the oars and oar stops.
First, assemble the two piece oars. Align the holes so that the button
pops through the oar handle.
To set an oar in an oar lock drop the thinnest section of the oar into
the oar lock. Slide the oar until the oar stop rests against the oar
lock.
*Helpful hint: Oars do not need to be taken apart in order to place in
oar locks.
16. Attach the rod holder.
The rod holder may be placed in three different positions on
eithertheleftorrightoarlockframe.Youcanholdyourrodto
the back (1), out to the side (2) or to the front (3).
The rod holder attaches with the clevis frame pin as in step 8.
To use the rod holder first unwrap the rip-and-grip strap on the
end. Put your rod in the holder butt end first then turn it to drop
the reel handle into the cutout on the side of the rod holder.
Keeping one hand on your rod use your other hand to wrap the
strap around the front of the reel to secure your rod in place in
the holder.
17. The bladder repair kit.
Included with your boat are self-adhesive tube patches to repair any tears or holes in the pontoon bladders.
We recommend storing these in one of the pockets to keep them available for repairs.

16
OSWEGO PONTOON BOAT OWNER’S MANUAL
1. Check the inflation valves.
2. Give them a visual inspection, making sure the valve is closing
properly and the valve cap closes securely.
3a.Checkifyoucanhearairescaping.Youmayalsousesoapywater
around the valve to see bubbles. A leak will produce bubbles. If you
find that a valve is leaking air around its edge, the valve may be
loose.
3b. The inflation valve consists of a two-part
assembly. There is the inflation valve intself
and the inflation valve cage. The inflation
valve cage protects the inflation valve from
damage and is bonded into the pontoon
bladder.
4. To tighten a loose valve insert the Inflation
Valve Wrench into the valve and twist
clockwise (note: do not overtighten). It may
be necessary to grasp the inflation valve cage (which is inside the
pontoon bladder) to get enough purchase to twist the valve. Be
careful not to tear or rip the bladder skin.
If the valve is difficult to turn, remove the valve completely and add a
small amount of silicon grease to the valve O-ring and reassemble.
If the valve is not leaking around its edge, you may have a defective
valve.
Please visit our website at: www.classicaccessories.com to order a new
valve.
IfthevalvesareOK,proceedtobladdertroubleshooting
section.Youmustremovethebladderfromthepontoonskins
to check for holes or tears. Completely unscrew the inflation
valve from the inflation valve cage and remove bladder from
the skin. Reinsert valve and proceed to page 16.
If your boat appears to be losing air, it might not be because of a leak. Changes in air
temperature, elevation and use on cold water (which can cool the air inside the pontoon
bladders) can all have an effect on the air inside the bladders. If none of these factors have
changed, you may need to look for a leak. Follow the steps listed below.
Inflation Valve Cage
(bonded to pontoon bladder) Inflation Valve
Valve O-ring
Check valve edge
for leaks
Inflation
Valve
Wrench
Turn counter-clockwise to loosen
Turn
clockwise
to tighten
Inflation
Valve Wrench
TROUBLESHOOTING

17
OSWEGO PONTOON BOAT OWNER’S MANUAL
BLADDER REPAIR & TROUBLESHOOTING
Repairing Tears and Holes in Pontoon Bladders
Checkifyoucanhearairescapingthebladderinanysuspectedareas.Youcanapplysoapywater
to any suspected areas as well. A leak will produce bubbles. If you find a hole, fix it using the
methods listed below.
1. For best results, it is important to apply patch to a clean, dry surface and that the surface
temperature is 50° F (10° C) or warmer.
2. Use an alcohol prep pad to clean the surface to be repaired. If you do not have an alcohol
prep pad, use a 50/50 mixture of isopropyl alcohol and water. After cleaning, allow the
surface to dry completely.
3. Peel back 1/8inch - 1/4inch (0.3cm - 0.6cm) of paper backing, position and anchor the
exposed patch edge, allowing the patch to extend 1inch (2.5cm) beyond all edges of the tear.
4. Slowly peel the paper backing while carefully applying the patch over the tear. Take care to
avoid air bubbles.
5. Rub the patch firmly for proper adhesion and allow to cure for 4 hours before use.
6. Reinflate bladder to confirm repair.
7. Once repair is confirmed, deflate and reinstall the
bladder.
8. Make sure to align the valves in the bladder with
the valve openings in the pontoon skin. Insert the
valve and tighten until snug. Since the pontoon skin
is captive in between the inflation valve cage and
the inflation valve, care must be taken not to tear,
rip or stress either the bladder or the skin by over-
tightening the valve.
Extend patch
one inch (2.5cm)
beyond tear
NOTE: The most common cause of leakage is a loose valve. Please verify using the steps on page 15.

18
OSWEGO PONTOON BOAT OWNER’S MANUAL
CARE & STORAGE
TRANSPORTING YOUR PONTOON BOAT
The boat can be transported partially or fully assembled and or inflated. Due to size
constraints, many customers will keep their frame fully intact and simply inflate and
attach their pontoons once they reach their destination. Various methods such as a
pickup truck bed, trailer, or roof rack can be used to transport your boat. If you are
carrying a partially or fully assembled and or inflated boat, please consult with your
vehicle, trailer, or roof rack Manufacturer.
CARE FOR YOUR BOAT
The pontoon boat can be cleaned with soap and water then rinsed.
Use a soft rag for hard to clean areas.
Temporarily hang the frame vertically to drain and dry the metal tubes of excess water
after each use.
SEASONAL STORAGE OF YOUR BOAT
Remove pontoons from the frame, empty pockets of any sharp objects that may
puncture the skin. Deflate completely and fold for storage. Store pontoons away from
sharp objects, heat or abrasive wear. Dismantle frame and boat parts and store in box.

19
MANUEL D’UTILISATION DU BATEAU PONTON OSWEGO
TABLE DES MATIÈRES
INTRODUCTION 20
CAPACITÉ DU BATEAU ET CARACTÉRISTIQUES TECHNIQUES 21
CONSIGNES DE SÉCURITÉ ET SYMBOLES 22
RESPONSABILITÉS DE L'UTILISATEUR 23
CERTIFICAT D’ORIGINE ET NUMÉROS D’IDENTIFICATION DE COQUE 24
GONFLAGE ET ASSEMBLAGE 25
UTILISATION D'UN MOTEUR ÉLECTRIQUE ET DE LA BATTERIE 26
LISTE DES PIÈCES 27
ASSEMBLAGE ET UTILISATION 28-32
GUIDE DE DÉPANNAGE 33
RÉPARATION DE LA CHAMBRE À AIR ET GUIDE DE DÉPANNAGE 34
ENTRETIEN ET REMISAGE 35

20
MANUEL D’UTILISATION DU BATEAU PONTON OSWEGO
Félicitations,vousvenezdefairel’acquisitiondubateaupontonOswegode
Classic Accessories.
Ce manuel a été préparé afin de vous aider à assembler correctement le
bateauetàl’utiliserentoutesécurité.Ilcontientdesinformationsimportantes
concernant le bateau, ses pièces, son utilisation, son entretien et sa réparation.
Veuillez lire attentivement ce manuel et vous familiariser avec le bateau avant
toute utilisation.
Si ce bateau est votre premier bateau ponton ou si vous comptez utiliser ce type
debateaupourlapremièrefoisetand’assurervotreconfortetvotresécurité,
veuillez vous exercer auparavant avec un autre bateau ponton et acquérir une
certaineexpérienceavantd’utilisercebateau.Eneffet,vouspourrezainsi
profiter de votre bateau pendant des années sans avoir de problèmes.
VEUILLEZ CONSERVER CES INSTRUCTIONS EN LIEU SÛR ET LES REMETTRE AU
NOUVEAU PROPRIÉTAIRE SI VOUS VENDEZ CETTE EMBARCATION.
MODIFICATIONS
Il est déconseillé à tout propriétaire de modifier le bateau ou ses pièces,
son équipement ou ses dispositifs. Toute modification risque de nuire à la
conception,àl'intégritéetàl’utilisationdubateauetderendrenulleetnon
avenue la garantie.
INTRODUCTION
Vous avez des questions, des problèmes ou des pièces s’avèrent manquantes ?
Avant de retourner au magasin, appelez le service à la clientèle au 1-800-854-2315, de
8 h à 16 h, heure normale du Pacifique, du lundi au vendredi.