Clear Water CW13 User manual

06/2018 AT21551A01
Address
Clearwater
Lakeview House,
Rennie Drive,
Dartford,
Kent
DA1 5FU
"Bylaw n.166/2009 - As bylaw enacted we state that some components of this product are imported from extra-Eu countries. Tested, assembled and inspected inside our factory."
Maintenance and spare parts of the waste
1 2 3
INSTALLATIONINSTRUCTIONS
CW13
OVERFLOW BATH WASTE
tool supplied
49
75
66
94°
85
3° max
40
87
5.6
129
80
1
2
3
4
5
6
7
8
9
1
0

BEGIN OPEN
FULLY OPEN
RECLOSED
Inlet
max 28 l/min
Outlet
max 30 l/min
40cm
+ - 1 cm
25cm
+ - 1 cm
+-25cm 1 cm
Installation Notes
49
75
66
94°
85
3° max
40
87
5.6
129
80
•Please ensure that the air vent is installed in the correct position at the top of waste outlet.
•When temperatures fall below 0°C protect the product from frost.
•Use mains water only and particularly avoid salt water and/or water containing sand.
•Do not alter or modify the product in any way.
•The correct cleaning of the waste do not use products containing solvents, acid or alkaline
corrosive substances to clean the product, abrasive sponge and plugs with metallic thread,
because they could irreversibly alter the treated surfaces.
The MANUFACTURER disclaims any responsibility for use which fails to comply with the installation notes.
NB: Air Vent must be positioned up as shown for
correct installation