Cleral KILOAD Use and care manual

CALIBRATION MANUAL
SUPPORT –QUESTIONS
CONTACT
1-866-485-4037
KILOAD BASICS
The Kiload weighs by measuring the “flex” of the front axle
(A) and the air pressure in the air bags/rear axles (B).
Because of this, it is important with this scale as with all
scales that the suspension must be as “Neutral” as possible
when you acquire your weight readings. This simply means
that a level load area and a „relaxed‟ suspension is the best
way to acquire weights.
To begin the days work and just prior to loading your first
load, the scale should be “ZEROED”.
To Zero: preferably where you will be loading, stop the truck
and „relax‟ the suspension. Now push the “Zero” button-the
display will ask you “Zero-yes?” now push the “Zero” button
one more time and the scale will automatically zero. If the
scale reads “Zero-no?, push the up or down arrow to change
it to read “Zero-yes? Then push the “Zero” button, now you
are ready to load. The scale should be Zero‟ed periodically
throughout the day to compensate for temperature changes
and load area changes. You are now ready to load.
Once the truck is loaded, take a look at the “T” total weight
reading on your scale. It will show the weights on the “A” front
axle and “B” rear axle group separately.
To adjust the weight, first push the “DOWN” arrow on the
KILOAD, then lower your tag axle as necessary to obtain the
proper balance between the “A” front axle and “B” rear
axle(s).
When you are finished with the load and before you take on
another load, PUSH the UP arrow to return to normal
weighing.

1. Empty Calibration
Advance the front wheels only of the Empty truck (with full
fuel) onto the weighbridge.
Record steering tare (Empty) weight: exp. 9000 lbs.
Next move entire truck onto the weighbridge.
Record total Empty weight: exp. 25000 lbs
Subtract steering (A) empty weight from total Empty weight
to obtain drive axle Empty weight :
exp. 25000 –9000 = 16000
Drive axle Empty weight = 16000 lbs.
Now it‟s time to enter the Empty weights
To enter the Empty weights:
A = Steering
B = Drivers
Calibration
EMPTY FULL
1. Press CAL key and a
flashing “Empty” will
appear.
2. Press CAL key again; a
flashing “A” will appear.
3. Press & hold Up or Down
arrow to reach the desired
“Empty” weight of “A” axle
group (steering axle).
4. Press CAL key to move to
the “B” axle group (rear
drivers) “B” will begin
flashing.
5. Press & hold Up or Down
arrow to reach the desired
“Empty”weight of “B” axle
group (rear drivers).
6. Press CAL key. You are
done entering your
“Empty”weights.
EMPTY T: 9000
A: 9000 B: 16000
T : 00
A: 9000 B: 0











2. Full Calibration
Advance front wheels only of the Full truck onto
the weighbridge.
Record steering Full weight: exp. 10000 lbs.
Next move entire truck onto the weighbridge
Record total Full weight: exp. 40000 lbs.
Subtract steering axle (A) Full weight from total Full weight to
obtain drive axle weight:
exp. 40000 –10000 = 30000
Drive axle Full weight = 30000 lbs
Now it‟s time to enter the Full weights
To enter the Full weights:
A = Steering
B = Drivers








Calibration
EMPTY FULL

T : 00
A: 10000 B: 0

FULL T: 40000
A: 10000 B: 30000


1. Press CAL key and a
flashing “Empty” will
appear.
2. Press Up or Down arrow
key; “Full” will begin
flashing.
3. Press CAL key “A” will
begin flashing.
4. Press & hold Up or Down
arrow to reach to desired
“Full” weight of “A” axle
group (steering axle).
5. Press CAL key “B” will
begin flashing.
6. Press & hold Up or Down
arrow to reach the desired
“Full” weight of “B” axle
group (rear drivers).
7. Press CAL key & you are
done.




Limited Warranty
Your CLERAL product is warranted against defects in
material or workmanship for one year from date of original
purchase. Any CLERAL product, which, because of a
manufacturing mistake or malfunction, proves to be defective
within the one year warranty period, will be repaired or
replaced at CLERAL’S option, and at no charge to you,
provided it is returned to CLERAL with proof of purchase.
This warranty does not cover incidental or consequential
damage to persons or property caused by use, abuse, misuse, or
failure to comply with installation or operating instructions.
This warranty is only valid if the installation and service is
provided by certified CLERAL technicians.
CLERAL shall have no responsibility for overload fines
received while using this product.
For repairs or replacement, please contact your local dealer