Cleveland AFF-950-EC User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site: www.ClevelandRange.com
Email: [e-mail]
COOK CHILL SYSTEMS Cook/Chill Systems
Cleveland Standard Features
nElectrically powered belt conveyor with quick discon-
nects for the Air and Electrical hookups for use with
the Cycle-Matic Form-Fill-Seal Machine
nAir operated raise and lower, loading end of conveyor
for various pouch lengths
nNo additional Air or Electric required if used with
Cycle-Matic Form-Fill-Seal Machine
nAll stainless steel construction
nFrame mounted on (4) 3" diameter lockable swivel
casters
n18" wide USDA approved polypropylene belt with rub-
ber inserts
n1/3 Horse power TEFC motor with drive gearbox
nVariable belt speed controlled from Cycle-Matic Form-
Fill-Seal Machine touch screen
nConveyor can operate in either Constant Run or Timed
Run
nOperator start/stop controlled from Cycle-Matic Form-
Fill-Seal Machine touch screen
nEmergency stop at Cycle-Matic Form-Fill-Seal Machine
control panel
nAccepted for use in U.S.D.A. Inspected Facilities
SECT. XIV PAGE 31
0707
CONVEYOR
FOR USE WITH CYCLE-MATIC VERTICAL
FORM-FILL-SEAL MACHINE
MODEL: c AFF-950-EC
Shall be CLEVELAND Model AFF-950-EC EXITING CONVEYOR
with; Air operated raise and lower, loading end of conveyor for
various bag lengths; All stainless steel construction; Frame
mounted on (4) 3" diameter lockable swivel casters; 18" wide
USDA approved polypropylene belt with rubber inserts; 1/3
Horse power TEFC motor with drive gearbox; Variable belt
speed and Operator start/stop controlled from Cycle-Matic
Form-Fill-Seal Machine touch screen; Conveyor can operate in
either Constant Run or Timed Run; Emergency stop at Cycle-
Matic Form-Fill-Seal Machine control panel.
Short Form Specifications

SECT. XIV PAGE 32
0707
Litho in USA
Cleveland Range reserves right of design improvement or modification, as warranted.
(NOT TO SCALE)
56.50"
1435mm
21.06"
535mm
45.13"
1146mm
95.50"
2426mm
40.00"
1016mm
35.63"
905mm
CLEARANCE
TO REMOVE
VALVE ASSY.
15.00"
381mm
81.19"
2062mm
PRODUCT
FROM FOOD
TRANSFER
PUMP
2"
TRI-CLAMP
CONN.
61.75"
1569mm
32.5"
826mm
10.25"
260mm
28.00"
711mm
18.00"
457mm
32.38"
823mm
PRODUCT
FROM
KETTLE
PRODUCT TO
AFF-950
3” ACME THREADED
CONNECTION
(optional)
AIR SUPPLY HOSE
TO AFF-950
85 PSI MAX
NO EXTRA AIR
REQUIRED
AIR SUPPLY HOSE
TO AFF-950
85 PSI MAX
NO EXTRA AIR
REQUIRED
CONTROL CABLE
TO AFF-950
CONTROL PANEL
NO EXTRA POWER
REQUIRED
CONTROL CABLE
TO AFF-950
CONTROL PANEL
NO EXTRA POWER
5.31"
135mm
2” TRI-CLAMP
CONNECTION
3
1
1
2
2
4
4
A
19.00"
487mm
MOTOR POWER
CABLE TO
AFF-950 CONTROL PANEL
NO EXTRA POWER
REQUIRED
MOTOR POWER
CABLE TO
AFF-950
CONTROL BOX
NO EXTRA AIR
REQUIRED
AIR SUPPLY HOSE
TO AFF-950
85 PSI MAX
AIR SUPPLIED FROM CYCLEMATIC
NO EXTRA AIR REQUIRED
AIR SUPPLY HOSE
FOR EXITING CONVEYOR
EXITING CONVEYOR
MOTOR POWER CABLE
FOOD TRANSFER
PUMP
CONTROL CABLE
AIR SUPPLY HOSE
FOR FOOD
TRANSFER PUMP
HOSE HOOKUP
FROM FOOD
TRANSFER PUMP
TO AFF-950
AIR QUICK DISCONNECT
FOR EXITING CONVEYOR
FOOD TRANSFER
PUMP
CONTROL CABLE
CONNECTION
EXITING CONVEYOR
MOTOR POWER CABLE
CONNECTION
AIR QUICK DISCONNECT
FOR FOOD PUMP
OFF
8.25" MIN.
(210mm)
25.50" MAX.
(648 mm)
29.75"
(756 mm)
66.25"
1683mm
25.25"
641mm
13.25"
337mm
17.50"
438mm
33.75"
857mm
MUSTBEPULLED
OUTTORUN
PUSHTOSTOP
CONTROL
POWER
OFF ON
FILM CART
WITH STOCK
FILM ROLL
MUSTBEPULLED
OUTTORUN
PUSHTOSTOP
CONTROL
POWER
OFF ON
43
2
1