Cleveland 450HPEM User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity_______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio,U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site:www.ClevelandRange.com
Email: [e-mail]
MODULAR BASES
MODEL:c450HPEM
Cleveland Standard Features
nTwo Continuos Coil electric heating elements
n208 Volt, 60 Hz, 1 Phase 1,950 watts per element.
n18" wide (450-mm) Cleveland Range matching
modular cabinet base
nAluminized Steel base frame
nSeparate temperature controls with a "Heat-On"
indicator light
nLeft Hand Hinged Cabinet base door
nStainless steel table top,exterior base panels and
cabinet door
nAluminized steel shelf in cabinet base for storage
n6" Stainless Steel Adjustable Legs with Flanged Feet
nApprovals: UL, CSA, and NSF
Options & Accessories
p240 volts, 60 Hz. 1 Phase, 2,600 watts per element
pStainless Steel Base Frame (FSS)
p10" Adjustable Legs (LF10)
Shall be Cleveland Range model number 450HPEM, two element electric hot
plate. ______ Volt, 60 Hz, 1 phase, 1,950 watts per element. 18" wide match-
ing cabinet base, 6" level adjustable flanged feet.
Short Form Specifications
SECT. VII PAGE 39
0707
HOT PLATES
TWO ELEMENT ELECTRIC HOT PLATE

NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., NSF, CGA, CSA, ETL and others.
(NOT TO SCALE)
SECT
.VII P AGE 40
0707
Litho in U.S.A.