Cleveland 450HPGM User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity_______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio,U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site:www.ClevelandRange.com
Email: [e-mail]
MODULAR BASES
MODEL:c450HPGM
Cleveland Standard Features
nTwo Gas Fired Burners
n20,000 BTU/HR, Per Burner-Natural Gas. 17,500
BTU/HR, Per Burner-Propane Gas
n3/4" gas regulator
nStanding Pilot light for instant lighting
n18" wide (450-mm) Cleveland Range matching
modular cabinet base
nAluminized Steel Base Frame
nIndividual Burner Controls
nLeft Hand Hinged Cabinet Base Door
nStainless steel table top, exterior base panels and
cabinet door
nAluminized steel shelf in cabinet base for storage
n6" Stainless Steel Adjustable Legs with Flanged Feet
nApprovals: AGA and NSF
Options & Accessories
pPropane Gas
pStainless Steel Base Frame (FSS)
p10" Adjustable Legs (FSS)
pElevation above 2,000 feet
Shall be Cleveland Range model number 450HPGM, two burner gas hot
plate, 20,000 BTU/HR per Burner, natural gas, 18" wide matching cabinet
base and 6" level adjustable flanged feet.
Short Form Specifications
SECT. VII PAGE 41
0707
HOT PLATES
TWO ELEMENT GAS HOT PLATE

NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., NSF, CGA, CSA, ETL and others.
(NOT TO SCALE)
SECT. VII PAGE 42
0707
Litho in U.S.A.