Cleveland IBC-100 User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site: www.ClevelandRange.com
Email: [e-mail]
COOK CHILL SYSTEMS Cook/Chill Systems
SECT.XIV PAGE 47
0707
AIR AGITATED
ICE BUILDER
MODELS:cIBC-50 cIBC-150 cIBC-250 cIBC-450
cIBC-75 cIBC-175 cIBC-300 cIBC-500
cIBC-100 cIBC-200 cIBC-350 cIBC-600
cIBC-125 cIBC-225 cIBC-400 cIBC-1000
Cleveland Standard Features
nDirect expansion ice builder, with externally equalizing
thermostatic expansion valves.
nFor operation with R-22, 404A or R507 refrigerant
(please specify).
nLiquid and suction headers are provided with single point
connections to the condensing unit.
nCoils are factory pressure tested, dried using a deep
vacuum, and filled with dry nitrogen at atmospheric
pressure for shipping.
nFor fast, even temperature distribution the water return is
located on the rear of the tank and the chilled water outlet on
the front.
nTank is constructed of 1/4" steel plate with angle stiffeners,
and all seams are double welded.
n2" thick insulation between double plated tank bottom.
nTank sides and ends have a 3" polystyrene insulation
between the tank wall and the outer sheathing of stucco
embossed aluminum.
nInterior of the tank is coated with a zinc dust primer.
nStandard top 2" insulated covers are sectional, overlapping,
and self-draining.
nAir blower with removable air distribution pipes, located
between each vertical bank of ice coils, for even ice
build-up and melting.
nAutomatic ice bank control with temperature and
conductivity sensors. Indicates low ice condition.
nWaterproof control box mounted to outside of tank.
nAutomatic water level control furnished with 3/4" water
solenoid valve.
nAvailable in sizes for up to 100,000 lbs. capacity.
nAccepted for use in U.S.D.A. Inspected Facilities
Options & Accessories
pIce water control panel for location in production area (model
IW-CP).
pCondensing units for indoor or outdoor installation, air or
water cooled (specify).
pWater circulating pumps (must be sized by mechanical engi-
neer).
pPump package stand with premounted water circulation
pump and air blower, complete with motor starters.
pStainless steel evaporator coils.
pAll stainless steel ice builder.
Shall be Cleveland Model IBC-____; ____,000 lbs., capacity
air agitated ICE BUILDER for direct expansion operation;
thermostatic expansion valves; liquid and suction headers
are provided with single point connections to condensing
unit. The coils are factory tested, dried using a deep vacu-
um. Unit includes: Automatic water level control, insulated
covers, ice bank control, liquid line solenoid and air agita-
tion package. Tank is constructed of 1/4" steel plate with
angle stiffeners, 3" polystyrene insulation on sides and
ends, 2" thick insulation on bottom. The exterior is covered
by stucco embossed aluminum panels.
Short Form Specifications

SECT. XIV PAGE 48
0707
Litho in USA
Cleveland Range reserves right of design improvement or modification, as warranted.
FRONT VIEW
PLAN VIEW
RECOMMENDED
FLOOR SINK
W
LIQUID
H
24"
OUTLET
SUCTION
EXPANSION VALVE
REFRIGERANT
THERMAL
INLET
LIQUID
SUCTION
OUTLET
REFRIGERANT
INLET
ICE WATER OUTLET
D1
DRAIN
COLD CITY WATER
CONTROL BOX
WATER LEVEL
ICE BANK &
AIR BLOWER
L
INLET 1" NPT
D1 & D2
ICE WATER
RETURN
ICE WATER
RETURN
ICE WATER
OUTLET
MINIMUM CLEARANCE
FRONT 36"
SIDE 24"
REAR 36"
DIMENSIONS
ICE OVERALL OVERALL OVERALL TANK NO. OF
STORAGE TANK TANK TANK WATER AIR THERMAL SHIPPING OPERATING
CAPACITY LENGTH WIDTH HEIGHT CAPACITY BLOWER EXP. WEIGHT WEIGHT
MODEL (LBS) L W H (GALS) HP VALVES (LBS) (LBS)
IBC-50 5000 107" 69" 75" 1400 1/2 4 4470 16260
IBC-75 7500 122" 84" 75" 2150 1/2 5 5050 22900
IBC-100 10000 153" 84" 75" 2800 1 1/2 5 6500 29980
IBC-125 12500 153" 84" 90" 3150 1 1/2 5 9000 35150
IBC-150 15000 178" 84" 90" 3750 1 1/2 5 10500 42100
IBC-175 17500 173" 84" 105" 4350 3 5 11500 47600
IBC-200 20000 194" 84" 105" 4950 3 5 12750 54400
IBC-225 22500 184" 98" 105" 5550 3 6 13250 59300
IBC-250 25000 201" 98" 105" 6100 3 6 14750 66100
IBC-300 30000 236" 98" 105" 7250 3 6 17250 78300
IBC-350 35000 236" 113" 105" 8450 3 7 19500 90700
IBC-400 40000 206" 127" 120" 9550 3 8 20250 100700
IBC-450 45000 228" 127" 120" 10700 3 8 22500 112650
IBC-500 50000 381" 98" 105" 12100 5 12 28500 130400
IBC-600 60000 339" 113" 120" 14450 5 14 31000 152750
IBC-1000 100000 479" 127" 120" 23500 5 16 48500 246500
ICE WATER CONNECTIONS
IBC-50 to IBC-100 3"
IBC-125 to IBC-250 4"
IBC-300 to IBC-500 5"
IBC-600 6"
IBC-1000 8"
LIQUID INLET
IBC-50 to IBC-100 7/8"
IBC-125 to IBC-250 1 1/8"
IBC-300 to IBC-400 1 3/8"
IBC-500 (2) 1 1/8"
IBC-600 to IBC-1000 (2) 1 3/8"
SUCTION OUTLET
IBC-50 to IBC-75 1 3/8"
IBC-100 to IBC-175 2 1/8"
IBC-200 to IBC-250 2 5/8"
IBC-300 to IBC-450 3 1/8"
IBC-500 (2) 2 5/8"
IBC-600 to IBC-1000 (2) 3 1/8"
AIR BLOWER INLET
IBC-50 to IBC-75 3/4"
IBC-100 to IBC-200 1"
IBC-225 to IBC-450 1 1/2"
IBC-500 to IBC-1000 2"
OVERFLOW
IBC-50 to IBC-1000 2"
DRAIN
IBC-50 to IBC-1000 3"
NOTES: LIQUID LINE SOLENOID VALVE, SIGHT GLASS AND AIR BLOWER SHIPPED LOOSE.
REGRIGERANT NOT SUPPLIED BY CLEVELAND RANGE.
(NOT TO SCALE)
D2
D1