ClickClack CSM001SS User manual

Now that
you’ve got me...
here’s how
to use me.
Stick Mixer
CSM001SS
VARIABLE
SPEED
DIAL
TURBO
MODE
DETACHES
FOR EASY
CLEANING
SOFT
GRIP
HANDLE
For household use only.
Save these instructions.

FIRSTLY, LET’S STAY SAFE
So I can keep blending
to your high standards,
read these safety
instructions before using
me. And why not keep
them somewhere handy?

Important safeguards
Warning: Please ensure all safety instructions are followed carefully.
Failure to follow instructions could result in personal injury or
property damage.
1. Protective cover fitted on power plug may present as a choking hazard to
young children. Remove and discard all packaging before initial use.
2. Use the appliance only for its intended purpose. The appliance is only
for domestic use, so read all instructions thoroughly before use.
3. To protect against the risk of electric shock, do not immerse the
blender body, power cord or plug in water or other liquids.
Do not handle with wet hands.
4. This appliance should not be used by children and care should be
taken when used near children. Children should be supervised to
ensure that they do not play with the appliance.
5.
This appliance is not intended for use by persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge unless
they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety to avoid a hazard.
6. Turn the appliance OFF and unplug from the power outlet when not in
use, before assembling or disassembling parts, and before cleaning.
To unplug, grasp the power plug and pull from the power outlet. Never
pull from the power cord. This appliance is not intended to be operated
with an external switching device such as a timer.
7. To avoid injury, do not touch any moving parts.
8. Do not operate the appliance with a damaged power cord or plug, or
if the appliance malfunctions, or if dropped or damaged in any manner.
If damage is suspected, contact ClickClack by email or phone. In order
to avoid a hazard, repairs and part replacements must be made by
ClickClack or its service agent only.
9. Keep the appliance away from hot surfaces. Do not use appliance while
heating or cooking on the stove top. Do not use with boiling liquids.
Allow hot food and liquid to cool slightly before blending.
10.
When mixing liquids, particularly if hot, use a tall container or make
smaller quantities at a time to reduce spillage.
11. Do not let the power cord hang over the edge of a table or bench or
touch any hot surfaces including the stove.
12. Be careful blending hot liquid as it can be ejected out of the appliance
due to a sudden steaming.
13. Do not use attachments that are not approved or sold by the appliance
manufacturer.
14. Do not use outdoors or in damp areas.
15. Blades are very sharp, use extreme care when handling the blending shaft.
16. Keep hands, hair, clothing, and other utensils away from the appliance
during operation to reduce the risk of personal injury and/or damage
to the appliance. A scraper may be used but only when the appliance is
not running.
17. Potential injury from misuse.
1

My specifications
Model: CSM001SS
Rating: 220-240V~ 50/60Hz 800W
Now it’s time to get
to know my parts
1. TURBO button
2 START button
3 Blender body
4. Blending shaft (detachable)
5. Speed dial
6. Blades
2

SPEED
DIAL
START
BUTTON
BLADES
BLENDER
BODY
TURBO
BUTTON
BLENDING SHAFT
(DETACHABLE)
5
2
6
3
1
4
3

BLENDER
BODY
BLENDING
SHAFT
(DETACHABLE)
Cleaning
BEFORE YOU GET STARTED:
• Blades are very sharp, use extreme care when handling the blending
shaft during cleaning.
• Always ensure the appliance is OFF and unplugged from the power
outlet before cleaning.
• Do not immerse the blender body, power cord or plug into water
or any other liquid!
• Do not wash any parts in the dishwasher.
• Do not use harsh or abrasive cleaning agents or solvents.
Before using for the first time, as well as after each use, clean the appliance
as follows:
Blender body:
Wipe the exterior surface of the blender body with a damp cloth or sponge
and dry thoroughly. Never immerse in water or any other liquid.
Detachable blending shaft:
Detach the blending shaft from the blender body by turning it clockwise.
Then wash the blending shaft under running water. Be careful that no
liquid enters the hollow shaft. Then dry thoroughly.
4

Usage Instructions
Clean before initial use – refer to cleaning instructions on page 4.
CAUTION:
• Always ensure the appliance is OFF and unplugged from the power
outlet before attaching or detaching the blending shaft. Do not plug
the appliance into the power outlet until it is fully assembled.
• Never immerse the blender body in food or liquid!
•
Always release the START or TURBO button and wait for the blades to
come to a complete stop before removing appliance from ingredients.
• Do not operate this appliance continuously for more than one minute.
After one minute of use, unplug and let the unit rest until it cools down
before using again.
• Not suitable for use in non-stick cookware.
Let’s get blending!
1. Attach the blending shaft to the blender body and turn anti-clockwise
until the blending shaft clicks and locks into place. Use the icons on the
blending shaft and the line on the blender body as a guide. Be certain
the blending shaft is securely locked in place.
2. Place your food and/or liquid into a container that is tall enough
to avoid splashes or spills. Ensure container is placed on a flat, dry
surface.
3. Plug the appliance into the power outlet.
4. Carefully immerse the blending shaft so the ingredients in the
container cover the blades. Never immerse the blender body in food
or liquid. Select the speed. Then press and hold the START button to
begin blending. (Always immerse the blending shaft first, to avoid
splashes!). The processing speed is set with the speed dial. The higher
the setting, the faster the blending results.
5. Work through the ingredients with a gentle up and down movement
of the appliance. You can get maximum processing speed by setting
the speed dial to high and holding down the TURBO button instead of
START. You can also use the TURBO button for instant powerful pulses
without having to use the speed dial.
6. To stop the appliance, release the START or TURBO button and wait
for blades to come to a complete stop.
7. Remove the appliance from the container and unplug from the power
outlet. Detach the blending shaft from the blender body by turning
clockwise.
8. Done! Refer to cleaning instructions to get your appliance looking
spick and span. 5
STEP THREE
Lock
STEP FOUR
Unlock
STEP ONE
Align
STEP TWO
Connect

www.clickclack.com
Innova Products Limited
322 Neilson Street, Onehunga,
Auckland, New Zealand.
Phone: [phone]
Email: [e-mail]