Closet Maid Workbench 10845 User manual

INSTALLATION INSTRUCTIONS
© 2020 ClosetMaid LLC | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com01-18645-00 06/20
Workbench
10845

2
BEFORE BEGINNING
•Please read all instructions carefully.
•Familiarize yourself with all parts (see“PARTS”) and check quantities.
•Follow all safety precautions (see“SAFETY PRECAUTIONS”).
WARNING
CHOKING HAZARD FOR SMALL CHILDREN. This unit
contains small parts which could be a choking hazard for
small children. Children should be under adult supervision
at all times or serious injury could occur.
ALWAYS UNLOAD UNIT PRIOR TO MOVING THE UNIT.
The weight of personal belongings can cause the unit to
become unstable and either tip or collapse. Serious bodily
injury and/or damage to personal belongings may occur.
DO NOT OVERLOAD UNIT. If any shelf, top, or bottom
of unit bows or bends, it is overloaded. The shelf, top, or
bottom could collapse and cause serious bodily injury and/
or damage to personal belongings. Evenly distribute loads.
DO NOT CLIMB OR STEP ON THE UNIT. The unit may
become unstable and either tip or collapse. Serious bodily
injury and/or damage to personal belongings may occur.
DO NOT USE THIS UNIT AS A TELEVISION STAND.
Serious bodily injury and/or damage to personal
belongings mayoccur.
DO NOT MOUNT OR ATTACH ANYTHING TO THE SIDES,
REAR, OR FRONT OF THE UNIT. This can create a force
which can cause the unit to tip. Serious bodily injury and/or
damage to personal belongings may occur.
DO NOT STACK UNITS. Stacking of units can cause an
unsafe tip-over hazard which may cause serious bodily
injury and/or damage to personal belongings.
DO NOT HANG THIS UNIT ON THE WALL. The product
structure is not designed for wall hanging. Serious bodily
injury, damageto personal belongings, and/or damage to
the wall may occur.
•PROTECT YOUR WORK SURFACE DURING ASSEMBLY.
We recommend you protect your work surface
duringassembly to prevent scratching or damage to table
tops, woodfloors, etc.
UNIT DOES NOT PROVIDE PROTECTION AGAINST
ELECTRICAL SHOCK.
SAFETY PRECAUTIONS
STOP FOLLOW INSTRUCTIONS
CAREFULLY
Please do not return product to the retail store.
Forproduct assistance and warranty information
pleasecall Consumer Affairs at 1-800-874-0008.
Manufacturer Warranty
Manufacturer will replace any missing or damaged part
due to manufacturer defect for one year after purchase.
Pleasehave proof of purchase for warranty claims.
• Do not let any sharp objects touch or rub the surface of
theproduct.
• When assembling, do not let children play around the
working area.
• Please confirm all parts are correct before starting the
assembly process.
• DO NOT OVERTIGHTEN. DO NOT USE POWER TOOLS.
Power tools can overtighten screws and strip threads.
We recommend you hand-tighten screws.
Please note location of predrilled holes.

3
Name Qty.
AA
Allen Wrench
1
BB
M8 x 20 mm. Bolt
8 + 1
PARTS
Call 1-800-874-0008 for parts and service. For faster service, have the style number ready when calling.
TOOLS REQUIRED
HARDWARE PROVIDED
Level

4
PARTS
Call 1-800-874-0008 for parts and service. For faster service, have the style number ready when calling.
PRODUCT
*Please note location of predrilled holes on each part.
A
B
C
Name Qty Part #
AWorkbench Top 1 35880
BWorkbench Legs 2 35881
CAdjustable Feet 4 20621

5
Attach workbench legs to table top.
STEP 1
Align one workbench leg (B) with one end of the workbench top (A) as shown.
Use the allen wrench (AA) to secure the workbench leg (B) to workbench top (A) using four M8 x 20 mm. bolts (BB).
Repeat steps for other leg.
*Please note location of predrilled holes on each part.
A
AA
BB
B
x 1
AA x 8 BB

6
Attach adjustable feet.
STEP 2
Align the four adjustable feet (C) with the bottom four holes on the workbench legs (B). Screw the feet in to secure.
Stand the unit up on the feet. Use a level to determine if any changes need to be made to the adjustable feet.
*Maximum height extension for adjustable feet is 1.5 in.
*Please note location of predrilled holes on each part.
C