Clover CW5700TX User manual

WIRLESS CAMERA-CW5700TX
1. POWER JACK
Plug the supplied AC adapter (DC 15V 250mA).
2. ANTENNA
Sends audio and video signals.
3.CHANNEL
SELECTION BUTTON
Must select the same channel on both transmitter and receiver. Press the button to
select a channel and the corresponding red LED on the front will be lit.
4. IR LED
Automatically turns on at night to view objects in darkness.
5. Mounting bracket
Install the mounting bracket on the wall or ceiling where you want to.
6. C-MIC
High sensitivity condenser microphone.

WIRELESS RECEIVER-CW5700RX/USB DVR
1. ANTENNA
Receives the audio and video signals.
2. USB indicator
The blue LED is lit when the receiver is connected to computer with USB cable.
3. POWER INDICATOR
The red LED is lit when the power is on.
4. AUTO SWITCHING INDICATOR
The green LED is lit when in the sequencing mode.
5. CH 1
The blue light is lit when CH1 has been selected.
6. CH 2
The blue light is lit when CH2 has been selected
7. CH3
The blue light is lit when CH3 has been selected.
8. CH4
The blue light is lit when CH4 has been selected.
9. MOUNTING BRACKET
For the receiver to stand.
10. POWER ON/OFF SWITCH
Switch for the power On/Off.
11. DC IN
Plug the 8V adapter (Supplied) 12. A/V (AUDIO/VIDEO) OUTPUTJACK
Connect the supplied A/V cable to the jack. Plug the yellow.
colored RCA to the VIDEO IN on the monitor / TV and the white colored RCA to the

AUDIO IN respectively.
13. CHANNEL SELECTION BUTTON
Use to find optimal reception.
Must select the same channel on both transmitter and receiver.
14. Connector to USB
Transfer signal to USB connector.
Product includes
1- 2.4 GHz Wireless Color Camera
1- 2.4 GHz Wireless Receiver Built-in USB DVR
1- Bracket for the Receiver to Stand
2- UL Approved AC Adapter
1- A/V (audio/video) Cable
1- Instruction Manual (Part I)
1- Warranty Registration Card
1- Quick Set-Up Guide
1- Installation CD including Instruction Manual (Part II)
1- Mounting Hardware Kit

How to Install
1. Connect the one end (small plug) of USB cable to the jack on the receiver.
2. Connect the
other end of USB connector to your computer’s USB port.
USB DVR connects to the computer with the provided USB cable.
Wireless ReceiverComputer