Clover HDC560 User manual

INSTALLATION
54
3
CELING-MOUNT
213mm
111mm
93mm
234mm
111mm
93mm
5 4
WALL-MOUNT
3
Base Ring
Screw
Bracket
1
2
Case
1. Attach the mounting bracket base ring①to
the wall or ceiling, wherever you want to
install the camera. Locate a wall stud or
ceiling joist and secure the bracket base ring
using the supplied screws. Attach the mount-
ing bracket②to the base ring①and secure
them using the supplied screws.
2. Lock the mounting bracket with the locking
ring③.
3. Turn the pivot locking screw④with the
provided hex-head wrench counterclockwise
to set the desired angle of camera toward
objects and turn it clockwise to secure. It can
be used for wall-mount or ceiling-mount
application depending on setting this pivot
locking screw.
4. Loosen the locking screw⑤with the pro-
vided hex-head wrench and turn the camera
clockwise or counter-clockwise to upright
images on the screen and turn it clockwise to
secure.
5. Connect the one end of 100’ cable
(supplied) to the Din jack of 5’ cable attached
to the camera. Make sure that two arrows on
the top of them should be aimed at each
other. Connect the other end (BNC or RCA)
of cable to the video devices such as DVR,
monitor/TV. Plug the provided AC adapter to
the DC jack (red) of the end of 100’ cable.

1
2
34
5
Case
1. Vari-focal lens①
Easily changeable angle of view: 4 to 9mm
2. T↔W (Tele ↔ Wide)②
Loosen the locking screw③ with a (-) driver (not included)
and turn this adjustment ring②
clockwise or counter-clockwise to set the focal length.
Secure the locking screw③after
setting.
3. ∞↔N④
Loosen the locking screw⑤ with a (-) driver (not included)
and turn this adjustment ring④
clockwise or counter-clockwise to set the focus. Secure the
locking screw⑤after setting.