Clover WW2000 User manual

Transmitter --- Camera (WW2000)
Component
1.Power Button
2.Focus Adjustor
3.Camera Lens
4.Infrared Emitting Tube
5.Indicator Lamp
6.Crophone
7.Rectangle Antenna
8.Input Jack of Power DC 12V
9.Channel Selector
1) Use the pin of power line with adaptor to insert into the jack ⑧, and plug the power
supply to connect the camera.
2) Press the Button ①to open the power then the indicator lamp ⑤will be bright.
3) Adjust the Channel Selector ⑨to the corresponding channel of monitor.
4) If the monitor is working, it will display the picture which camera was taken.
5) Adjust the Focus Adjustor ②to get the clearest image (when first time do it, then
afterward do not need to re-adjust it).
6) Place the camera in the far site, and synchronously adjust its antenna ⑦and monitorˊs
to get the clearest image.
7) You can also adjust the direction and the up-angle of camera when you need.