Clover OW0702 User manual

MONITOR
Front View
1. Channel 1 indicator light. When camera 1 is active, this LED
(indicator) is on.
2. Channel 2 indicator light. When camera 2 is active, this LED
(indicator) is on.
3. Cannel select button press this button to select the desired camera.
4. Auto switching indicator.
5. Power switch. Press to power on/off.
6. Power on indicator. When the monitor is powered on this indicator is
lit.
Rear View
1. DC power input jack
2. DC power output for camera
3. DC power output for camera
4. Video in jack
5. Audio in jack
6. Video in jack
7. Audio in jack
8. Video out jack
9. Audio out jack
10.V-hold control knob. Adjust for stable image
11.Brightness control. Adjust it to get desired brightness
12.Contrast control. Adjust it to get the best gradation.
CAMERA
FRONT VIEW
1. Camera lens
2. Infrared LED
3. Microphone
REAR VIEW
1. Monitor input jack