CNP Brands childcare MASON 091951 User manual

IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
MASON
Toddler Bed
# 091951

Safety Precautions
Read all instructions before assembly and use of the toddler bed.Keep instructions
for future use.
THIS PRODUCT CONTAINS SMALL PARTS WHICH ARE FOR ADULT
ASSEMBLY ONLY.
AS SMALL PARTS ARE INVOLVED IN ASSEMBLY, CHILDREN SHOULD BE
KEPT CLEAR OF THE ASSEMBLY AREA.
IDENTIFY ALL PART AND COMPONENTS,CLEAR AN AREA ON THE FLOOR
FOR ASSEMBLY AND PLACE A SHEET ONTHE FLOOR TO ENSURETHE
TODDLER BED WILL NOT BE SCRATCHED DURING ASSEMBLY.
DISPOSE OF ALL PACKAGING MATERIAL IMMEDIATELY AFTER THE
TODDLER BED IS ASSEMBLED.
FAILURE TO FOLLOW THESE WARNINGS AND THE ASEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH FROM STRANGULATION.
DO NOT PLACE BED NEAR WINDOW WHERE CORDS FORM BLINDS OR
DRAPES MAY STRANGLE A CHILD.
INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.
Openings in and between bed parts can entrap head and neck of a small
child.
NEVER use bed with children younger than 15 months.
ALWAYS follow assembly instructions.
STRANGULATION HAZARD
NEVER place bed near windows where cords from blinds or drapes may
strangle a child.
NEVER suspend strings over bed.
NEVER place items with a string,cord,or ribbon, such as hood strings or
pacier cords, around a child’s neck.These items may catch on bed parts.
ENTRAPMENT HAZARD
To avoid dangerous gaps, any mattress used in this bed shall be a full-
size crib mattress at least 1300mm in length, 690mm in width, and a
max thickness of 150mm.

Safety Precautions
This toddler bed has been manufactured for one child only, not less than 15 months
of age Hawith a maximum weight of 22.7kgs.
Ensure the toddler bed is placed at a reasonable distance from curtains, blinds,
heaters and power points.
Ensure the toddler bed is completely assembled and check that all parts are securely
tightened before placing the child into the toddler bed.
Ensure medication, string, elastic, small toys or small items such as money etc are
always kept out of the child’s reach when in the toddler bed.
Do not over tighten bolts/screws.
RECOMMENDED MATTRESS SIZE:
THIS TODDLER BED HAS BEEN MANUFACTURED FOR USE WITH A MATTRESS WHICH
MEASURES 690 MM WIDE BY 1300 MM LONG AND 100 MM-150 MM IN THICKNESS.
The width and length are specied because it is important that the gaps between the
mattress and the sides and ends of the toddler bed will not exceed 40 mm when the
mattress is pushed to one side or end,and 20mm when the mattress is centred in the
toddler bed.This is to minimise the risk of a child’s limb becoming caught in the gap.

4
Due to variations in the style and design of our products,the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and design
may vary from images shown. CNP Brands reserves the right to alter product specications
without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your toddler bed
Congratulations on your purchase of the Mason
Toddler Bed.
This product has been designed and developed with safety, comfort
and functionality in mind. Please take the time to read this manual
carefully before using this product and keep it in a safe place for future
reference.
Congratulations

5
Assembly Contents
Check what you have received...
You have received 1 box.Please check the contents of the box against the list below. If
anything is missing, please contact Customer Service. In Australia, contact CNP Brands on
1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Headboard panel Base slats
(with 1 hole)
Screw
Dowels Allen Key
Footboard panel Base support Panels
Safety Guard Panels
Bedrail Bolts 25mm
Fabric Drawer
Middle base slat
(with 2 holes)
x1 x6
x16
x4 x1
x1 x1
x2
x2 x10
x1
x1

6
Assembly / Operating Instructions
Headboard Section 1
Align headboard panel with safety
guard panel
Align slat (recess side up) with pre
drilled hole.
Repeat on other side.
Insert 25mm bolts on headboard
and align with safety guard and
secure bolt with Allen key.
21
3 4

7
Assembly / Operating Instructions
Headboard Section 1
Section 1 completed should look
like left photo.
Align end panel with bed rail.
1
Insert x2 25mm bolt on one side
and secure bolts.
2
End panel side Section 2

8
Assembly / Operating Instructions
End panel side Section 2
Repeat on other side, should look
like below photo.
Section 2 completed should look
like left photo.
Align slat (recess side up) with pre drilled
hole and insert screws into polite holes
and secure for the last three slats.
3 4

9
Assembly / Operating Instructions
Insert all four dowels into safety
guard panel
Fit base support foot in between both section 1 and 2.
Align section 1 and 2 together into
dowel and secure.
1
3
2
Assembly of the headboard & foot panels Section 3

10
Assembly / Operating Instructions
Assembly of the headboard & foot panels
Secure middle base slat (with 2
holes recess side up)
Insert 25mm bolts into hole and
secure base support foot.
Place storage draw into end
panel
Tighten all bolts and screws
Insert 4 screw into polite holes and
secure the middle slat.
This should completed all sections.
4
7
6
5
8

11
How to care for your Childcare Toddler Bed
Cleaning
To ensure the long-lasting use of your toddler bed, wipe down with a damp cloth
and use a mild soap solution if necessary. Do not use abrasive cleaners.Always store
product in a clean dry place.
Maintenance
Always check parts regularly for tightness of screws, nuts and other fasteners – tighten
or replace if required.To maintain the safety of your travel cot, seek prompt repairs for
bent, torn, worn or broken parts. Use only those parts and accessories approved by CNP
Brands.
If you have any difculties in assembling the stroller, please contact our Service
Department. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.

Distributed in Australia by CNP
Brands
20 Calarco Drive,
Derrimut,VIC, 3030
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [e-mail]
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by
Wainhouse Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes,Auckland, New Zealand
Customer Service: 0800 567 5000
E: [email protected].nz