Coaster 100952 User manual

www.coastercompany.com
COASTER FINE FURNITURE
ASSEMBLY INSTRUCTION
100952
R
OAK CHAIR
page 1 of 4 2012/05/
100952
100951

PARTS IDENTIFICATION
ASSEMBLY INSTRUCTION
ITEM : 100952
ASSEMBLY TIPS:
1.Remov e hardware from box and sort by size.
2.Please check to see that all hardware and parts are present prior to start of assembly.
3.Please follow attached instructions in the same sequence as numbered to assure fast &
easy assembly.
Warning !
1. Don't attempt to repair or modify parts that are broken or defective .Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishment.
Assembly Instruction
R
page 2 of 4
www.coastercompany.com
A LEFT ARMREST 1 PC
C LEFT BACKREST 1 PC
E SEAT 1 PC
F BACK CUSHION 1 PC
G BASE 1 PC
H CASTER 5 PCS
I WOODEN COVER 1 PC
J SUPPORTING BAR 1 PC
K SEAT PLATE 1 PC
B RIGHT ARMREST 1 PC
D RIGHT BACKREST 1 PC

R
page 3 of 4
www.coastercompany.com
ASSEMBLY INSTRUCTION
ITEM : 100952
HARDWARE PACKAGEZ
DESCRIPTION FIGURE Q’TYNO:
1/$5*( BOLT 4 PCS
3METAL WASHER 12PCS
413mm HEX NUT 8 PCS
5WOODEN PLUG 4 PCS
6 GLUE 1 PC
7 ALLEN WRENCH 1 PC
260$// BOLT 4 PCS
I
J
3
2
34
STEP 1:
Insert the Casters H into the Base G .
STEP 2:
Insert the Supporting
Bar J into the Base G
center with a plastic
hammer ,QVHUW the Wooden
Cover I through the
Supporting Bar J .
G
STEP 3:
Attach the Seat Plate K to the Seat E
with Bolt 2 and Metal Washer 3 .
(The Knob on the Seat Plate G VKRXOGfacH
forwards)
STEP 4:
Attach the Left Armrests A to the
Left BacNrest C with Metal Washer 3
and Nut 4 7henDWWDFK the Right
Armrests B to the Right Baclrest D
with Metal Washer 3 and Nut 4 .
( Don’t tightenthe Bolts 1 until step 6)
Knob

R
page 4 of 4
www.coastercompany.com
ASSEMBLY INSTRUCTION
ITEM : 100952
J
34
STEP 5:
Attach the Left (Right) Armrests (A /B) and the
Left (Right) BacNrest (C /D) onto the Seat (E) with
Metal Washer (3) and Nut (4) .
(Don’t tighten the Bolts (1) untils step 6)
STEP 6:
Attach the Back Cushion (F) to the
Left (Right) BacNrest (C /D) with Bolts (1),
then put into the Wooden Plug (5).
STEP 7:
Place the Seat (E) onto the SupportingBar (J)
through the hole under the Seat Plate (K) .
5
5
1
51
1
1
B
C
D
C
D
A
K
E