Coaster 600187 User manual

600187
ROCKER CHAIR
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
REVISION 0: 09/23/2011
REVISION 1: 02/23/2012
PAGE 1 OF 4
REVISION 1: 02/23/2012

ITEM :
ASSEMBLY INSTRUCTIONS
600187
ASSEMBLY TIPS:
1
. Remove hardware from box and sort by size
1
. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy
assembly.
!Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact
the store immediately.
A
CHAIR BACK
1PC
D
WOOD SEAT
1PC
PARTS IDENTIFICATION
the store immediately.
2. This product is for home use only and not intended for commercial establishment.
A
CHAIR BACK
1PC
D
WOOD SEAT
1PC
B1 1PC E1PC
B2 1PC
LEFT ARM
REST
LONG
STRETCHER
RIGHT ARM
B2
1PC
F1PC
C1
LEFT LEG 1PC
C2 RIGHT LEG 1PC
RIGHT ARM
REST SHORT
STRETCHER
1LONG BOLT 8PCS 6ALLEN WRENCH 1PC
HARDWARE IDENTIFICATION
2SHORT BOLT 9PCS
7BARREL NUT 6PCS
3LOCK WASHER 17PCS
8WOOD PLUG 9PCS
42PCS
515PCS
www.coastercompany.com
BIG FLAT
WASHER
SMALL FLAT WASHER
www.coastercompany.com
PAGE 2 OF 4

ITEM :
ASSEMBLY INSTRUCTIONS
STEP 1 STEP 2
600187
Align and fasten short and long stretchers to left and
Place wood seat upside down on soft surface, align
Align and fasten short and long stretchers to left and
right leg frame using long bolt, lock washer and flat
washer, tighten with Allen wrench. Insert wood plug
into leg frame stretcher.
Place wood seat upside down on soft surface, align
and hand tighten left and right leg frame to wood
seat using short bolt , lock washer and flat washer,
tighten all bolt with Allen wrench.
STEP 3
Align and fasten chair back to wood seat using short bolt, lock washer and flat washer then tighten with
Allen wrench. Insert wood plug into the chair back brace.
Allen wrench. Insert wood plug into the chair back brace.
www.coastercompany.com
www.coastercompany.com
PAGE 3 OF 4
C1
C1
C2 C2

ITEM :
ASSEMBLY INSTRUCTIONS
STEP 4
600187
Align and fasten left and right arm rest to chair back using long bolt, lock washer and small flat washer and
Align and fasten left and right arm rest to chair back using long bolt, lock washer and small flat washer and
tighten with Allen wrench.
STEP 5
Complete.
www.coastercompany.com
PAGE 4 OF 4
PAGE 4 OF 4